15 Best 4 Inch Diameters

 

CMT 24000804 Biscuit Joiner Blade 4-Inch Diameter x 8 Teeth PTFE-Coated

CMT 240.008.04 Biscuit Joiner Blade, 4-Inch Diameter x 8 Teeth, PTFE-Coated.

CMT 240.008.04 Biscuit Joiner Blade, 4-Inch Diameter x 8 Teeth, PTFE-Coated. - High-grade german steel and 6 micrograin carbide-tipped teeth guarantee years of use. This blade fits lamello, dewalt, skil, bosch, freud and other popular biscuit joiner models. The 4 cmt biscuit joiner blades with orange-ptfe industrial coating trademark makes biscuit joining quickly and easily. .

 

Amanaote 304 Stainless Steel 4 Inches Diameter Tube Strap Tension Clip Pipe ClampPack Of 5 Sets

Amanaote 304 Stainless Steel 4 Inches Diameter Tube Strap Tension Clip Pipe Clamp(Pack Of 5 Sets)

Amanaote 304 Stainless Steel 4 Inches Diameter Tube Strap Tension Clip Pipe Clamp(Pack Of 5 Sets) - Bolt these around any duct and attach a piece of metal conduit with flattened and. Drilled ends (not included) for additional support from a wall or ceiling.

 

CMT 69201310 Cabinet Joinery Set 4-Inch Diameter 1-Inch Bore

CMT 692.013.10 Cabinet & Joinery Set, 4-Inch Diameter, 1-Inch Bore

CMT 692.013.10 Cabinet & Joinery Set, 4-Inch Diameter, 1-Inch Bore - Rpm between 5500 and 8400. 13 pairs of m2 steel knives featuring 1-37/64-inch cutting length. Included are profiles for raised panels, rail & stile, tongue & groove and cove & bead. Lightweight, aircraft-grade aluminum cutterhead. Delivered in a molded plastic case ideal for the professional woodworker.

 

Prime-Line Products GD 52108 4-Inch Diameter Pulley with Strap and Bolt

Prime-Line Products GD 52108 4-Inch Diameter Pulley with Strap and Bolt

Prime-Line Products GD 52108 4-Inch Diameter Pulley with Strap and Bolt - This style pulley can be used at stationary or spring pulley positions. It features a case hardened steel race with steel ball bearings. . This heavy duty pulley is constructed from galvanized steel.

 

Dynabrade 93168 4-Inch Diameter 150 Grit AO Spindle-Mount Sanding Star Maroon

Dynabrade 93168 4-Inch Diameter 150 Grit A/O Spindle-Mount Sanding Star, Maroon

Dynabrade 93168 4-Inch Diameter 150 Grit A/O Spindle-Mount Sanding Star, Maroon - Specificationsdia. 1/4″type coatedgrit 150mineral aluminum oxide. Featuresthe most common mineral used in a wide range of good, general purpose abrasive products for use primarily on softer materials. It lacks the hardness of some other abrasive minerals but delivers a dependable performance where high pressure/high heat applidenibbing and sanding white wood raised panels. 4″shaft dia.

 

Speedi-Products EX-EVW 04 4-Inch Diameter Plastic Eave Vent White

Speedi-Products EX-EVW 04 4-Inch Diameter Plastic Eave Vent, White

Speedi-Products EX-EVW 04 4-Inch Diameter Plastic Eave Vent, White - Long aluminum tail for duct connection. Used for exhaust or fresh air intake venting systems. Seal joints with approved duct mastic sealants & tapes. Speedi-exhaust products are made in the usa. Use for dryer venting.

 

CMT 69410031 Rabbeting Cutter Head 4-Inch Diameter 1-14-Inch Bore

CMT 694.100.31 Rabbeting Cutter Head, 4-Inch Diameter, 1-1/4-Inch Bore

CMT 694.100.31 Rabbeting Cutter Head, 4-Inch Diameter, 1-1/4-Inch Bore - Rpm between 7500 and 12500. Ideal for coated and uncoated man made boards, plastic material and hard/softwood. Manual feed, pins for the automatic positioning of the knives. Heavy duty aircraft aluminum body, 2 carbide knives (50x12x15mm), 4 scoring knives (14x14x2mm). Use with spindle moulder machines, double-end tenorers, edging machines.

 

Noritz VP4-36STRAIGHT 4-Inch Diameter by 36-Inch Straight Stainless Steel Single Wall Venting

Noritz VP4-36STRAIGHT 4-Inch Diameter by 36-Inch Straight Stainless Steel Single Wall Venting

Noritz VP4-36STRAIGHT 4-Inch Diameter by 36-Inch Straight Stainless Steel Single Wall Venting - Noritz america corporation was established in 2001 to meet a growing demand among american consumers for more cost effective and hot water heater technology. With a solid commitment to sustainability and superb technology solutions in tankless hot water heaters, noritz makes significant investment in research and development. And through the dedication of its valued employees, noritz corporation continues to shape the future of sustainable living in north america through its tankless water heater solutions. Serving both homeowners and commercial users across the united states and canada, noritz america offers four distinguished lines of tankless gas water heaters to meet the varying needs of its broad spectrum of customers – ecotough, protough and value solutions as well as full line of commercial.

 

Speedi-Boot SBH-484 SB 4-Inch Width by 8-Inch Length to 4-Inch Diameter Straight Register Vent Boot with Adjustable Hangers

Speedi-Boot SBH-484 SB 4-Inch Width by 8-Inch Length to 4-Inch Diameter Straight Register Vent Boot with Adjustable Hangers

Speedi-Boot SBH-484 SB 4-Inch Width by 8-Inch Length to 4-Inch Diameter Straight Register Vent Boot with Adjustable Hangers - Adjustable telescoping hanger arms that can be shortened as well. Mud ring prevents gaps between the boot and sheetrock. Foam gasket seals air tight at installation to back of sheetrock. Dust and debris cover provides a plug for hvac pressure testing. Dust and debris cover prevents construction contamination.

 

Speedi-Products EX-HPG 04 4-Inch Diameter Heavy Duty Paintable Galv Hood

Speedi-Products EX-HPG 04 4-Inch Diameter Heavy Duty Paintable Galv Hood

Speedi-Products EX-HPG 04 4-Inch Diameter Heavy Duty Paintable Galv Hood - Wide mouth opening for better airflow. Speedi-exhaust products are made in the usa. Ideal for dryer and exhaust venting systems. Consult your local building codes for approved installation practices. Seal joints with approved duct mastic sealants and tapes.

 

Speedi-Products EX-DFRP 04 4-Inch Diameter Round Adjustable Plastic Diffuser White

Speedi-Products EX-DFRP 04 4-Inch Diameter Round Adjustable Plastic Diffuser, White

Speedi-Products EX-DFRP 04 4-Inch Diameter Round Adjustable Plastic Diffuser, White - This plastic round adjustable ceiling diffuser is easy to install using a stainless steel grip clip which provides a snug fit. Consult your local building codes for approved installation practices. Ideal for exhaust and supply air duct systems and fans. Seal joints with approved duct mastic sealants & tapes. Speedi-exhaust products are made in the usa.

 

QEP 6-4003Q  Continuous Rim Diamond Blade 4-Inch Diameter 58-78-Inch Arbor Wet Cutting 9500 Maximum RPM

QEP 6-4003Q Continuous Rim Diamond Blade, 4-Inch Diameter, 5/8-7/8-Inch Arbor, Wet Cutting, 9500 Maximum RPM

QEP 6-4003Q Continuous Rim Diamond Blade, 4-Inch Diameter, 5/8-7/8-Inch Arbor, Wet Cutting, 9500 Maximum RPM - Roberts continuous rim premium blade is constructed with quality materials providing superior durability and long lasting product life. Specially designed for wet or dry cutting and ideal for use with ceramic, porcelain and marble tile. Product measures 4”.

 

4 Inch Wall Vent Galvanized Damper Screen 4 Inch Diameter - Vent Works

4 Inch Wall Vent Galvanized Damper & Screen (4 Inch Diameter) – Vent Works

4 Inch Wall Vent Galvanized Damper & Screen (4 Inch Diameter) – Vent Works - When venting through a wall is the best option, a quality wall vent should be considered. . This wall vent is constructed of 26 gauge galvanized steel. Vent works 4″ inch, heavy gauge wall vents are not available at your local home improvement or general hardware store. There are 3 different utility options damper only, screen only, damper and screen. The back draft damper is spring loaded to prevent drafting from outside, we also included a ¼” inch metal screen. There are 3 different material options galvanized (26 gauge), white powder coated steel (26 gauge) and aluminum (high grade). There are 5 different size options 4 inch, 5 inch, 6 inch, 7 inch and 8 inch. Our vents are used in a wide variety of commercial and residential applications including heating systems, bathroom exhaust, kitchen exhaust, laundry room exhaust, venting spray booths, laser engraving machines, exhaust fan blowers, virtually anything with a 4 inch round exhaust. To install cut a 4-1/8″ inch hole in the side wall and install, be sure to seal it. If you need a different material, finish, utility option or size we have other wall vents available.

 

Speedi-Products EX-WCHD 04 4-Inch Diameter Heavy Duty Wall Cap Gray

Speedi-Products EX-WCHD 04 4-Inch Diameter Heavy Duty Wall Cap, Gray

Speedi-Products EX-WCHD 04 4-Inch Diameter Heavy Duty Wall Cap, Gray - Consult your local building codes for approved installation practices. Speedi-exhaust products are made in the usa. Made with uv stabilized polymer resin. Seal joints with approved duct mastic sealants and tapes. Removable damper and wide base flange.

 

Woodstock W1007 4-Inch Blast Gate for Use with VacuumDust Collectors 4-inch Diameter 2 Pack

Woodstock W1007 4-Inch Blast Gate for Use with Vacuum/Dust Collectors (4-inch Diameter 2 Pack)

Woodstock W1007 4-Inch Blast Gate for Use with Vacuum/Dust Collectors (4-inch Diameter 2 Pack) - Plastic blast gates are economically priced, have a textured surface and an easy sliding gate action. We offer blast gates in both black abs plastic and aluminum. Used in every dust collection system to control air flow from one machine to another, blast gates maximize system efficiency. Our blast gates are fast movers. For those customers who prefer metal, our top quality aluminum blast gates feature a cast aluminum body with steel gate and locking knob.