15 Best Carbide Tipped Saws

 

American Tool 10 Carbide Tipped Saw Blade 120 Tooth

American Tool 10″ Carbide Tipped Saw Blade 120 Tooth

American Tool 10″ Carbide Tipped Saw Blade 120 Tooth - Maximum rpm 6,000. Adapters are a little thinner than the blade. Fits most saws. Quantity 3. With the washer insert it is 5/8″. If you require adapter, 2 are usually required. Hole diameter is 1″.

 

AGE Series by Amana Tool MD7240 FramingDecking 7-14-Inch Diameter 24-Teeth 58-Inch Bore Carbide Tipped Saw Blade with Diamond Knockout

A.G.E. Series by Amana Tool MD7240 Framing/Decking 7-1/4-Inch Diameter, 24-Teeth, 5/8-Inch Bore Carbide Tipped Saw Blade with Diamond Knockout

A.G.E. Series by Amana Tool MD7240 Framing/Decking 7-1/4-Inch Diameter, 24-Teeth, 5/8-Inch Bore Carbide Tipped Saw Blade with Diamond Knockout - One of the most aggressive framing blades on the market. 15-degree hook angle, 5/8-inch bore with diamond knockout, ft grind. 070-inch kerf, 047-inch plate. 7-1/4-inch diameter, 24-teeth. Carbide tipped, industrial quality saw blades for framing/decking and
composite materials (trex®).

 

Tenryu PT-11536 4-12 Carbide Tipped Saw Blade  36 Tooth ATAF Grind - 38 Arbor - 0063 Kerf

Tenryu PT-11536 4-1/2″ Carbide Tipped Saw Blade ( 36 Tooth ATAF Grind – 3/8″ Arbor – 0.063 Kerf)

Tenryu PT-11536 4-1/2″ Carbide Tipped Saw Blade ( 36 Tooth ATAF Grind – 3/8″ Arbor – 0.063 Kerf) - Aggressive rake angles for maximum cutting speed and efficiency. High-grade, c-3, fine-grain tungsten carbide tips resist erosion for extended blade life. Each tip is precision honed on all four exposed surfaces this minimizes micro-chipping along the sharp edge of the blade and results in a sharper, longer-lasting edge. Thin kerf for less waste and lighter cutting performance (reduced feed pressure). Fully hardened, expertly tensioned tool steel bodies absorb impact, remain flat and true, and resist excess heat build-up.

 

AGE Series by Amana Tool MD10-500 Combination 10-Inch Diameter by 50-Teeth by 58-Inch Bore 4&1 Grind Carbide Tipped Saw Blade

A.G.E. Series by Amana Tool MD10-500 Combination 10-Inch Diameter by 50-Teeth by 5/8-Inch Bore, 4&1 Grind Carbide Tipped Saw Blade

A.G.E. Series by Amana Tool MD10-500 Combination 10-Inch Diameter by 50-Teeth by 5/8-Inch Bore, 4&1 Grind Carbide Tipped Saw Blade - Designed to rip and crosscut hardwoods, softwoods, as well as sheet stock such as plywood and particleboard. 126-inch kerf, 087-inch plate. 10-inch diameter, 50-teeth. 15-degree hook angle, 5/8-inch bore, combination 4+1 grind. Carbide tipped, industrial quality.

 

Freud LM74R014 14-Inch Diameter by 44T TCG Glue Line Ripping Carbide-Tipped Saw Blade with 1-Inch Arbor and 0138 Kerf

Freud LM74R014 14-Inch Diameter by 44T TCG Glue Line Ripping Carbide-Tipped Saw Blade with 1-Inch Arbor and 0.138 Kerf

Freud LM74R014 14-Inch Diameter by 44T TCG Glue Line Ripping Carbide-Tipped Saw Blade with 1-Inch Arbor and 0.138 Kerf - The ideal working range is from 1/8″ to 1″ thick. Application heavy duty glue line ripping blades for superior finish. With this ultimate ripping blade, there is no need for stabilizers. There is no need for sanding or jointing after the cut. This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades.

 

AGE Series by Amana Tool MD10-600 Cut-Off and Crosscut 10-Inch Diameter by 60-Teeth by 58-Inch Bore ATB Grind Carbide Tipped Saw Blade

A.G.E. Series by Amana Tool MD10-600 Cut-Off and Crosscut 10-Inch Diameter by 60-Teeth by 5/8-Inch Bore, ATB Grind Carbide Tipped Saw Blade

A.G.E. Series by Amana Tool MD10-600 Cut-Off and Crosscut 10-Inch Diameter by 60-Teeth by 5/8-Inch Bore, ATB Grind Carbide Tipped Saw Blade - Designed for smooth crosscuts in a variety of materials from hardwoods, softwoods and sheet stock including chipboard. Carbide tipped, industrial quality. 10-inch diameter, 60-teeth. 12-degree hook angle, 5/8-inch bore, atb grind. 126-inch kerf, 087-inch plate.

 

American Emblem Tool Co 22245 Carbide-tipped Saw Blade 7-14

American Emblem Tool Co 22245 Carbide-tipped Saw Blade 7-1/4″

American Emblem Tool Co 22245 Carbide-tipped Saw Blade 7-1/4″ - Carbide-tipped saw blade 7-1/4″ upc 082901222453. Designed to rip and crosscut hardwoods, softwoods, as well as sheet stock such as plywood and particleboard. 126-inch kerf, 087-inch plate. 15-degree hook angle, 5/8-inch bore, combination 4+1 grind. Carbide tipped, industrial quality.

 

Timberline 150-400 Contractor 6-Inch Diameter by 40-Teeth by 12-Inch Bore ATB Grind Thin Kerf Carbide Tipped Saw Blade

Timberline 150-400 Contractor 6-Inch Diameter by 40-Teeth by 1/2-Inch Bore, ATB Grind Thin Kerf Carbide Tipped Saw Blade

Timberline 150-400 Contractor 6-Inch Diameter by 40-Teeth by 1/2-Inch Bore, ATB Grind Thin Kerf Carbide Tipped Saw Blade - These blades feature an ultra thin kerf design requiring less horsepower and reduced stock loss. Blades are available for all types of materials and will fit most brands of portable battery and electrical saws, trim saws, portable table saws, contractor table saws, miter saws, compound miter saws, sliding compound miter saws, dual sliding compound miter saws and radial arm saws. 2volt. The individual blades are fully tensioned, hand hammered and heat treated for virtually no run-out. We utilize premium carbide tips that can be re-sharpened many times. Fit porter-cable saw boss, trim saw model #345 and model #9845 19.

 

Proxxon 28734 80mm Carbide Tipped Saw Blade for FKSE 24-Teeth

Proxxon 28734 80mm Carbide Tipped Saw Blade for FKS/E 24-Teeth

Proxxon 28734 80mm Carbide Tipped Saw Blade for FKS/E 24-Teeth - Dimensions overall length, end to end -7. -Use for cutting difficult to separate materials as aluminum, hard wood, chipboard, fiberboard and plastics. 28734 features -carbide tipped saw blade. 39″ h x 7. Overall height, top to bottom -0. 1 pounds. 23″ w x 0. 39 inches. 28″ w x 3. 28 inches. . -Overall dimensions 0. Generic dimensions -blade dimensions 3. 39″ d. 14″ h x 0. Overall product weight -0. -24 teeth. Product type -circular. 14″ d, 0. 1 lbs.

 

Makita B-07353 6-12 48T Carbide-Tipped Saw Blade

Makita B-07353 6-1/2″ 48T Carbide-Tipped Saw Blade

Makita B-07353 6-1/2″ 48T Carbide-Tipped Saw Blade - With the sp6000j, the b-07353 is an ideal blade for a full range of cutting applications including ripping plywood. The makita 48t carbide-tipped saw blade is the ideal accessory for the makita 6-1/2″ plunge circular saw (model sp6000j, sold separately). The blade features high-grade carbide tips for improved durability, and is engineered for smoother cutting.

 

Tenryu MP-305100AB2 12 Carbide Tipped Saw Blade  100 Tooth ATAFR Grind - 58 Arbor - 0118 Kerf

Tenryu MP-305100AB2 12″ Carbide Tipped Saw Blade ( 100 Tooth ATAFR Grind – 5/8″ Arbor – 0.118 Kerf)

Tenryu MP-305100AB2 12″ Carbide Tipped Saw Blade ( 100 Tooth ATAFR Grind – 5/8″ Arbor – 0.118 Kerf) - Use the super smooth cuts on hardwood, plywood, softwood and composites. This tenryu mp-305100ab2 precision double miter saw blade is 12-inch in diameter and has a 5/8-inch arbor and is ideal for woodcutting and is one of the premier manufactueres of saw blades in the world. Use this blade for miter cuts, cross cuts and cut-offs.

 

Tenryu PT-21060 8 Carbide Tipped Saw Blade  60 Tooth ATAF Grind - 58Ko Arbor - 0079 Kerf

Tenryu PT-21060 8″ Carbide Tipped Saw Blade ( 60 Tooth ATAF Grind – 5/8″Ko Arbor – 0.079 Kerf)

Tenryu PT-21060 8″ Carbide Tipped Saw Blade ( 60 Tooth ATAF Grind – 5/8″Ko Arbor – 0.079 Kerf) - Thin kerf for less waste and lighter cutting performance (reduced feed pressure). Each tip is precision honed on all four exposed surfaces this minimizes micro-chipping along the sharp edge of the blade and results in a sharper, longer-lasting edge. Aggressive rake angles for maximum cutting speed and efficiency. High-grade, c-3, fine-grain tungsten carbide tips resist erosion for extended blade life. Fully hardened, expertly tensioned tool steel bodies absorb impact, remain flat and true, and resist excess heat build-up.

 

Ace Carbide-tipped Saw Blade 2126670

Ace Carbide-tipped Saw Blade (2126670)

Ace Carbide-tipped Saw Blade (2126670) - Carbide-tipped saw blade 7-1/4 dia. 60 teeth 5/8 arbor premium carbide for fine cutting applications lasts 10 times longer than steel blades carded discovery con, nbr, sup, hwu all items sold new in original packaging.

 

Tenryu SL-16552 6-12 Carbide Tipped Saw Blade  52 Tooth ATAF Grind - 58Ko Arbor - 0063 Kerf

Tenryu SL-16552 6-1/2″ Carbide Tipped Saw Blade ( 52 Tooth ATAF Grind – 5/8″Ko Arbor – 0.063 Kerf)

Tenryu SL-16552 6-1/2″ Carbide Tipped Saw Blade ( 52 Tooth ATAF Grind – 5/8″Ko Arbor – 0.063 Kerf) - Fully hardened, expertly tensioned tool steel bodies absorb impact, remain flat and true, and resist excess heat build-up. High-grade, c-3, fine-grain tungsten carbide tips resist erosion for extended blade life. Thin kerf for less waste and lighter cutting performance (reduced feed pressure). Each tip is precision honed on all four exposed surfaces this minimizes micro-chipping along the sharp edge of the blade and results in a sharper, longer-lasting edge. Aggressive rake angles for maximum cutting speed and efficiency.

 

Proxxon 28732 3-964-Inch 80mm Carbide Tipped Saw Blade 36-Teeth

Proxxon 28732 3-9/64-Inch 80mm Carbide Tipped Saw Blade 36-Teeth

Proxxon 28732 3-9/64-Inch 80mm Carbide Tipped Saw Blade 36-Teeth - 39 inches. 23″ w x 0. 39″ h x 7. -Overall dimensions 0. 28″ w x 3. 2 lbs. -36 teeth. -Use for balsa, plywood, hard and soft woods, polycarbonate, plastic, aluminum and pc boards. Generic dimensions -blade dimensions 3. Overall height, top to bottom -0. 14″ d, 0. 14″ h x 0. Overall product weight -0. 2 pounds. 39″ d. 28732 features -carbide tipped saw blade. 28 inches. Product type -circular. Dimensions overall length, end to end -7.