17 Best and Coolest Texas Pneumatic Tools

 

Texas Pneumatic Tools Inc 34 X 6 Air Hose Whip Assembly w 1 16 oz Lubricator Chicago Coupling on Each End TX-15HW

Texas Pneumatic Tools, Inc. 3/4″ X 6′ Air Hose Whip Assembly w/ 1″, 16 oz. Lubricator & Chicago Coupling on Each End TX-15HW

Texas Pneumatic Tools, Inc. 3/4″ X 6′ Air Hose Whip Assembly w/ 1″, 16 oz. Lubricator & Chicago Coupling on Each End TX-15HW - Crowfoot/chicago fitting on compressor end. 1″, 16oz in line lubricator will flow up to 150 cfm at 90 psi. Use a hose whip with lubricator for safety and to save money, eliminate repairs and costly downtime. Equipped with crowfoot/chicago coupling tool end. Made in usa.

 

Texas Pneumatic Tools Inc 6 Diameter Venturi Air Mover wStainless Steel Horn TX-6AM-SH

Texas Pneumatic Tools, Inc. 6″ Diameter Venturi Air Mover w/Stainless Steel Horn TX-6AM-SH

Texas Pneumatic Tools, Inc. 6″ Diameter Venturi Air Mover w/Stainless Steel Horn TX-6AM-SH - Can operate on compressed air or steam. Can be used as a blower or exhauster for ventilating hazardous areas or for cooling. Made in usa. No moving parts/minimal maintenance. Moves 3,698 cfm of air when run at 100 psi and requires 101 scfm from the compressor.

 

Texas Pneumatic Tools Inc 4 Stroke 4 Bolt Chipping Hammer w Oval Collar Retainer for Round Shank Chisels TXCH4-4B-RS

Texas Pneumatic Tools, Inc. 4″ Stroke, 4 Bolt Chipping Hammer w/ Oval Collar Retainer for Round Shank Chisels TXCH4-4B-RS

Texas Pneumatic Tools, Inc. 4″ Stroke, 4 Bolt Chipping Hammer w/ Oval Collar Retainer for Round Shank Chisels TXCH4-4B-RS - Supplied with 6′ hose whip, in line lubricator, chicago coupling, one flat chisel and one moil point chisel. 34-36 cfm of air consumed at 90 psi. Made in usa. 1,375 blows per minute, 4″ stroke, 1-1/8″ bore. Oval collar retainer for round shank chisels.

 

Texas Pneumatic Tools Inc 34 X 6 Air Hose Whip Assembly w 1 16 oz Lubricator Chicago Coupling 1 Male NPT End TX-17HW

Texas Pneumatic Tools, Inc. 3/4″ X 6′ Air Hose Whip Assembly w/ 1″, 16 oz. Lubricator, Chicago Coupling & 1″ Male NPT End TX-17HW

Texas Pneumatic Tools, Inc. 3/4″ X 6′ Air Hose Whip Assembly w/ 1″, 16 oz. Lubricator, Chicago Coupling & 1″ Male NPT End TX-17HW - Use a hose whip with lubricator for safety and to save money, eliminate repairs and costly downtime. Made in usa. 1″, 16oz in line lubricator will flow up to 150 cfm at 90 psi. Equipped with 1″ male npt fitting on tool end. Crowfoot/chicago fitting on compressor end.

 

Texas Pneumatic Tools Inc 34 X 6 Air Hose Whip Assembly w 1 16 oz Lubricator Chicago Coupling 34 Male NPT End TX-16HW

Texas Pneumatic Tools, Inc. 3/4″ X 6′ Air Hose Whip Assembly w/ 1″, 16 oz. Lubricator, Chicago Coupling & 3/4″ Male NPT End TX-16HW

Texas Pneumatic Tools, Inc. 3/4″ X 6′ Air Hose Whip Assembly w/ 1″, 16 oz. Lubricator, Chicago Coupling & 3/4″ Male NPT End TX-16HW - Equipped with 3/4″ male npt fitting on tool end. Made in usa. 1″, 16oz in line lubricator will flow up to 150 cfm at 90 psi. Crowfoot/chicago fitting on compressor end. Use a hose whip with lubricator for safety and to save money, eliminate repairs and costly downtime.

 

Texas Pneumatic Tools Inc 90 Lb JackhammerPaving Breaker w 1-14 Chuck TX90PB-125

Texas Pneumatic Tools, Inc. 90 Lb. Jackhammer/Paving Breaker w/ 1-1/4″ Chuck TX90PB-1.25

Texas Pneumatic Tools, Inc. 90 Lb. Jackhammer/Paving Breaker w/ 1-1/4″ Chuck TX90PB-1.25 - 925 pound net weight, 2875″ overall length, requires 75 cfm of air at 90 psi. 1,250 blows per minute. Made in usa. We recommend the texas pneumatic tx15hw hose whip assembly for use with this tool for the correct fittings and appropriately sized in line lubricator. Requires 1-1/4″ x 6″ shank chisels.

 

Texas Pneumatic Tools Inc 12 X 6 Air Hose Whip Assembly w 34 11 oz Lubricator Chicago Coupling 12 Male NPT End TX-11HW

Texas Pneumatic Tools, Inc. 1/2″ X 6′ Air Hose Whip Assembly w/ 3/4″, 11 oz. Lubricator, Chicago Coupling & 1/2″ Male NPT End TX-11HW

Texas Pneumatic Tools, Inc. 1/2″ X 6′ Air Hose Whip Assembly w/ 3/4″, 11 oz. Lubricator, Chicago Coupling & 1/2″ Male NPT End TX-11HW - 3/4″, 11oz in line lubricator will flow up to 70 cfm at 90 psi. Use a hose whip with lubricator for safety and to save money, eliminate repairs and costly downtime. Made in usa. Equipped with 1/2″ male npt fitting on tool end. Crowfoot/chicago fitting on compressor end.

 

Texas Pneumatic Tools Inc 60 Lb JackhammerPaving Breaker w 1-18 Chuck TX60PB-1125

Texas Pneumatic Tools, Inc. 60 Lb. Jackhammer/Paving Breaker w/ 1-1/8″ Chuck TX60PB-1.125

Texas Pneumatic Tools, Inc. 60 Lb. Jackhammer/Paving Breaker w/ 1-1/8″ Chuck TX60PB-1.125 - Made in usa. Requires 1-1/8″ x 6″ shank chisels. We recommend the texas pneumatic tx15hw hose whip assembly for use with this tool for the correct fittings and appropriately sized in line lubricator. 67 pound net weight, 25625″ overall length, requires 59 cfm of air at 90 psi. 1,400 blows per minute.

 

Texas Pneumatic Tools Inc 2 Stroke 4 Bolt Chipping Hammer w Oval Collar Retainer for Round Shank Chisels TXCH2-4B-RS

Texas Pneumatic Tools, Inc. 2″ Stroke, 4 Bolt Chipping Hammer w/ Oval Collar Retainer for Round Shank Chisels TXCH2-4B-RS

Texas Pneumatic Tools, Inc. 2″ Stroke, 4 Bolt Chipping Hammer w/ Oval Collar Retainer for Round Shank Chisels TXCH2-4B-RS - Made in usa. Supplied with 6′ hose whip, in line lubricator, chicago coupling, one flat chisel and one moil point chisel. Oval collar retainer for round shank chisels. 2,100 blows per minute, 2″ stroke, 1-1/8″ bore. 32-34 cfm of air consumed at 90 psi.

 

Texas Pneumatic Tools Inc Triple Piston Pneumatic Scaler T3

Texas Pneumatic Tools, Inc. Triple Piston Pneumatic Scaler T3

Texas Pneumatic Tools, Inc. Triple Piston Pneumatic Scaler T3 - . They feature a rugged steel body, a lever operated throttle handle and are proudly made in the usa. Texas pneumatic piston type scalers are an excellent choice for removing rust, paint or concrete from steel surfaces and for roughing concrete surfaces. A variety of replacement pistons are available.

 

Texas Pneumatic Tools Inc Pneumatic Needle Scaler w Lever Throttle TX1BLTNS

Texas Pneumatic Tools, Inc. Pneumatic Needle Scaler w/ Lever Throttle TX1BLTNS

Texas Pneumatic Tools, Inc. Pneumatic Needle Scaler w/ Lever Throttle TX1BLTNS - Excellent for removing welding slag, cleaning castings, de-rusting and peening welded joints. 1″ bore, 1-1/8″ stroke, 4,600 blows per minute, requires 12 cfm @ 90 psi. Adjusts to any surface countour automatically. Made in usa. Can be converted to a chisel scaler (required parts sold separately).

 

Texas Pneumatic Tools Inc 12 X 6 Air Hose Whip Assembly w 34 37 oz Lubricator Chicago Coupling 78-24 Swivel TX-8HW

Texas Pneumatic Tools, Inc. 1/2″ X 6′ Air Hose Whip Assembly w/ 3/4″, 3.7 oz. Lubricator, Chicago Coupling & 7/8″-24 Swivel TX-8HW

Texas Pneumatic Tools, Inc. 1/2″ X 6′ Air Hose Whip Assembly w/ 3/4″, 3.7 oz. Lubricator, Chicago Coupling & 7/8″-24 Swivel TX-8HW - 3/4″, 37 oz in line lubricator will flow up to 70 cfm at 90 psi. Use a hose whip with lubricator for safety and to save money, eliminate repairs and costly downtime. Crowfoot/chicago fitting on compressor end. Made in usa. Equipped with 7/8″-24 swivel on tool end.

 

Texas Pneumatic Tools Inc 34 X 6 Air Hose Whip Assembly w 34 11 oz Lubricator Chicago Coupling 34 Male NPT End TX-12HW

Texas Pneumatic Tools, Inc. 3/4″ X 6′ Air Hose Whip Assembly w/ 3/4″, 11 oz. Lubricator, Chicago Coupling & 3/4″ Male NPT End TX-12HW

Texas Pneumatic Tools, Inc. 3/4″ X 6′ Air Hose Whip Assembly w/ 3/4″, 11 oz. Lubricator, Chicago Coupling & 3/4″ Male NPT End TX-12HW - Use a hose whip with lubricator for safety and to save money, eliminate repairs and costly downtime. Crowfoot/chicago fitting on compressor end. Made in usa. Equipped with 3/4″ male npt fitting on tool end. 3/4″, 11oz in line lubricator will flow up to 70 cfm at 90 psi.

 

Texas Pneumatic Tools Inc 12 X 6 Air Hose Whip Assembly w 34 37 oz Lubricator Chicago Coupling 34 Male NPT End TX-7HW

Texas Pneumatic Tools, Inc. 1/2″ X 6′ Air Hose Whip Assembly w/ 3/4″, 3.7 oz. Lubricator, Chicago Coupling & 3/4″ Male NPT End TX-7HW

Texas Pneumatic Tools, Inc. 1/2″ X 6′ Air Hose Whip Assembly w/ 3/4″, 3.7 oz. Lubricator, Chicago Coupling & 3/4″ Male NPT End TX-7HW - Use a hose whip with lubricator for safety and to save money, eliminate repairs and costly downtime. Crowfoot/chicago fitting on compressor end. Equipped with 3/4″ male npt fitting on tool end. Made in usa. 3/4″, 37 oz in line lubricator will flow up to 70 cfm at 90 psi.

 

Texas Pneumatic Tools Inc 3 Stroke 4 Bolt Chipping Hammer w Quick Change Retainer for Hex Shank Chisels TXCH3-4B-H

Texas Pneumatic Tools, Inc. 3″ Stroke, 4 Bolt Chipping Hammer w/ Quick Change Retainer for Hex Shank Chisels TXCH3-4B-H

Texas Pneumatic Tools, Inc. 3″ Stroke, 4 Bolt Chipping Hammer w/ Quick Change Retainer for Hex Shank Chisels TXCH3-4B-H - Made in usa. Quick change retainer for hex shank chisels. 1,650 blows per minute, 3″ stroke, 1-1/8″ bore. 33-35 cfm of air consumed at 90 psi. Supplied with 6′ hose whip, in line lubricator, chicago coupling, one flat chisel and one moil point chisel.

 

Texas Pneumatic Tools Inc 3 Diameter Short Horn Venturi Air Mover wPolymer Horn TX-3AMS-P

Texas Pneumatic Tools, Inc. 3″ Diameter Short Horn Venturi Air Mover w/Polymer Horn TX-3AMS-P

Texas Pneumatic Tools, Inc. 3″ Diameter Short Horn Venturi Air Mover w/Polymer Horn TX-3AMS-P - Can be used as a blower or exhauster for ventilating hazardous areas or for cooling. Moves 1,205 cfm of air when run at 100 psi and requires 51 scfm from the compressor. No moving parts/minimal maintenance. Can operate on compressed air or steam. Made in usa.

 

Texas Pneumatic Tools Inc Single Piston Pneumatic Scaler S1

Texas Pneumatic Tools, Inc. Single Piston Pneumatic Scaler S1

Texas Pneumatic Tools, Inc. Single Piston Pneumatic Scaler S1 - A variety of replacement pistons are available. They feature a rugged steel body, a lever operated throttle handle and are proudly made in the usa. Texas pneumatic piston type scalers are an excellent choice for removing rust, paint or concrete from steel surfaces and for roughing concrete surfaces. .





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.