17 Top Raised Panel Routers

 

Yonico 12136 Raised Panel Router Bit with Ogee Door 3-Inch Diameter 12-Inch Shank

Yonico 12136 Raised Panel Router Bit with Ogee Door 3-Inch Diameter 1/2-Inch Shank

Yonico 12136 Raised Panel Router Bit with Ogee Door 3-Inch Diameter 1/2-Inch Shank - The yonico panel raiser router bit 12136 will create beautiful raised panels for cabinet doors in the popular ogee design. Choose from our selection of rail and stile router bits to complete your raised panel doors. . Two flute carbide cutters & 1/2″ shank.

 

Magnate 3805B Raised Panel Router Bit Horizontal - Ogee Profile 1-12 Reveal

Magnate 3805B Raised Panel Router Bit, Horizontal – Ogee Profile; 1-1/2″ Reveal

Magnate 3805B Raised Panel Router Bit, Horizontal – Ogee Profile; 1-1/2″ Reveal - This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. It is also equipped with wide open gullets for easy disposal of wood chips. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. . The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Excessive overall length may cause tool damage. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. It is suited for softwoods, hardwoods, chipboard, plywood and etc.

 

Rockler Cove Horizontal Raised Panel Router Bit 2-12 Dia x 58H

Rockler Cove Horizontal Raised Panel Router Bit, 2-1/2″ Dia. x 5/8″H

Rockler Cove Horizontal Raised Panel Router Bit, 2-1/2″ Dia. x 5/8″H - Horizontal panel raising bits must be run at a slower rpm. The bits can also be used to make attractive drawer fronts, table tops, plaques and moldings. The horizontal orientation combined with the bearing guide allows you to raise panels for doors with arched or cathedral rails. Our panel raising bits are manufactured with a shear angle that is optimized for the smoothest possible cuts, both with and across the grain.

 

Amana Tool 54117 15-Degree Traditional Raised Panel 3-38-Inch Diameter by 12-Inch Cutting Height by 12-Inch Shank Router Bit

Amana Tool 54117 15-Degree Traditional Raised Panel 3-3/8-Inch Diameter by 1/2-Inch Cutting Height by 1/2-Inch Shank Router Bit

Amana Tool 54117 15-Degree Traditional Raised Panel 3-3/8-Inch Diameter by 1/2-Inch Cutting Height by 1/2-Inch Shank Router Bit - Replacement bearing no47706. For use only in a table mounted router. Carbide tipped, industrial quality. 3-3/8-inch diameter, 1/2-inch cutting height, 15 degree, 1/2-inch shank, 1-7/16-inch reveal. Build quality raised panels for your cabinet doors.

 

Magnate 3804 Raised Panel Router Bit Horizontal - 15 degree Face Cut Profile 1-116 Reveal

Magnate 3804 Raised Panel Router Bit, Horizontal – 15 degree Face Cut Profile; 1-1/16″ Reveal

Magnate 3804 Raised Panel Router Bit, Horizontal – 15 degree Face Cut Profile; 1-1/16″ Reveal - This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. It is suited for softwoods, hardwoods, chipboard, plywood and etc. Excessive overall length may cause tool damage. . Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. It is also equipped with wide open gullets for easy disposal of wood chips. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity.

 

Magnate 3806C Raised Panel Router Bit with Under Cutter - 12 degree Face Cut Quarter Round Profile

Magnate 3806C Raised Panel Router Bit with Under Cutter – 12 degree Face Cut & Quarter Round Profile

Magnate 3806C Raised Panel Router Bit with Under Cutter – 12 degree Face Cut & Quarter Round Profile - This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application. Excessive overall length may cause tool damage. It is precision ground, hardened, and tempered in order to stand up to a variety of materials. It is also equipped with wide open gullets for easy disposal of wood chips. It is suited for softwoods, hardwoods, chipboard, plywood and etc. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. .

 

Woodline USA WL 1421 Ogee with Step Cove Raised Panel Router Bit

Woodline USA WL 1421 Ogee with Step Cove Raised Panel Router Bit

Woodline USA WL 1421 Ogee with Step Cove Raised Panel Router Bit - Two flute carbide design. Heat resistant teflon coating. Ogee with a step cove profile. 3-1/2″ raised panel cutter with a 1/2″ shank. C3 micro-grain tungsten carbide cutters.

 

MLCS Raised Panel Router Bit 45 Degree Shaker Bevel Profile

MLCS Raised Panel Router Bit: 45 Degree Shaker Bevel Profile

MLCS Raised Panel Router Bit: 45 Degree Shaker Bevel Profile - 2-3/4″ large diameter. 2-flute, carbide-tipped with totally-enclosed ball bearing guide. This bit is used for thomas moser style shaker furniture. Create classic shaker style furniture with a 1/2″ deep tongue.

 

Yonico 12147q Raised Panel Vertical Router Bit with Medium Ogee 14-Inch Shank

Yonico 12147q Raised Panel Vertical Router Bit with Medium Ogee 1/4-Inch Shank

Yonico 12147q Raised Panel Vertical Router Bit with Medium Ogee 1/4-Inch Shank - C3 micro-grain tungsten carbide cutters. Build-up & heat resistant teflon coating. Satisfaction guaranteed & lifetime warranty. Industrial quality router bits. Solid hardened steel bodies with anti-kickback design.

 

Freud 97-254 3 Piece Door Set with Premier 99-761 Rail and Stile System and 99-520 Raised Panel Router Bit

Freud 97-254 3 Piece Door Set with Premier 99-761 Rail and Stile System and 99-520 Raised Panel Router Bit

Freud 97-254 3 Piece Door Set with Premier 99-761 Rail and Stile System and 99-520 Raised Panel Router Bit - Bit features freud’s tico hi-density carbide to maximize bit life and material finish. Optional cutters are available for double sided profile doors (99-861) and glass panel doors (54-760). Bit feature freud’s perma-shield coating that reduces heat and pitch build up along with rust. This set features freud’s 99-520 2 + 2 raised panel bit two small wings that cut downward and two large wings that shear upward, produce an extremely smooth cut in hardwoods, softwoods and even plywoods. This set allows the woodworker to build doors from 5/8 inch to 1-1/4 inch thickness and any length long tenon construction for rock-solid joints that last a lifetime.

 

Magnate 3894 Raised Panel Router Bit Horizontal - 25 degree Face Cut Profile 1-732 Reveal

Magnate 3894 Raised Panel Router Bit, Horizontal – 25 degree Face Cut Profile; 1-7/32″ Reveal

Magnate 3894 Raised Panel Router Bit, Horizontal – 25 degree Face Cut Profile; 1-7/32″ Reveal - This carbide tipped bit is specifically designed and manufactured for the high quality demanded by woodworking industrial applications. Excessive overall length may cause tool damage. . It is precision ground, hardened, and tempered in order to stand up to a variety of materials. Its cutting edges are radially relieved for a strong smooth cut in addition to avoiding rubbing and burning. It is suited for softwoods, hardwoods, chipboard, plywood and etc. It is also equipped with wide open gullets for easy disposal of wood chips. The cutting edges of this router bit are made from high industrial grade micrograin carbide tips brazed onto a heat-treated high-carbon steel body thus leading to exceptional hardness and rigidity. Note in order to avoid vibration and for maximum cutting quality, always choose a router bit with the shortest cutting edge and the shortest overall length available that is able to fit your project application.

 

MLCS Raised Panel Router Bit 12 Degree and Quarter Round Profile

MLCS Raised Panel Router Bit: 12 Degree and Quarter Round Profile

MLCS Raised Panel Router Bit: 12 Degree and Quarter Round Profile - 1/2″ shank. Top quality, carbide-tipped router bit. Make beautiful raised panel doors. Free shipping in contiguous usa.

 

Rockler Ogee Horizontal Raised Panel Router Bit 2-12 Diameter x 58H

Rockler Ogee Horizontal Raised Panel Router Bit, 2-1/2″ Diameter x 5/8″H

Rockler Ogee Horizontal Raised Panel Router Bit, 2-1/2″ Diameter x 5/8″H - The horizontal orientation combined with the bearing guide allows you to raise panels for doors with arched or cathedral rails. The bits can also be used to make attractive drawer fronts, table tops, plaques and moldings. Horizontal panel raising bits must be run at a slower rpm. . Our panel raising bits are manufactured with a shear angle that is optimized for the smoothest possible cuts, both with and across the grain.

 

Amana Tool 56116 Raised Panel Groove 2-Flute Carbide Tipped Router Bit 12-Inch Shank

Amana Tool 56116 Raised Panel Groove 2-Flute Carbide Tipped Router Bit, 1/2-Inch Shank

Amana Tool 56116 Raised Panel Groove 2-Flute Carbide Tipped Router Bit, 1/2-Inch Shank - Carbide tipped, industrial quality. 1/2-inch shank, 2 flute. Cutting diameter 1-1/8-inch. 1/2-inch cutting height. 30-degree angle.

 

MLCS Raised Panel Router Bit Ogee Profile

MLCS Raised Panel Router Bit: Ogee Profile

MLCS Raised Panel Router Bit: Ogee Profile - 2-1/4″ large diameter. Makes an attractive ogee profile for your rased panel door. 2-flute, carbide-tipped with totally-enclosed ball bearing guide.

 

Irwin Tools 1900993 Marples Vertical Raised Panel Router Bit with 12 Shank

Irwin Tools 1900993 Marples Vertical Raised Panel Router Bit with 1/2″ Shank

Irwin Tools 1900993 Marples Vertical Raised Panel Router Bit with 1/2″ Shank - More manageable cutting with fewer discrepancies. Vertical design allows the bit to cut at faster speeds with less powerful routers. Extended life, flawless finish. Carbide tipped woodworking router bit puts the longest axis of the cut upright to make the same cuts as horizontal router bits with a much smaller bit radius. For creating flat, square door panels.

 

Yonico 12150 Raised Panel Router Bit With Back cutter with Bevel 2-34 Diameter 12 Shank

Yonico 12150 Raised Panel Router Bit With Back cutter with Bevel 2-3/4″ Diameter 1/2″ Shank

Yonico 12150 Raised Panel Router Bit With Back cutter with Bevel 2-3/4″ Diameter 1/2″ Shank - Premium quality c3 micro-grain carbide cutters with silver induction brazing for maximum strength. Large heavy duty router bit that will cut the front profile and the back cut at the same time. Industrial radial guide bearing for easy operation and depth stop. Satisfaction guaranteed & limited lifetime warranty. This bevel panel raiser has a cutting depth of 1-1/8″ and can be used on stock up to 1-1/8″ thick the backcutter cuts 3/8″ deep plus a 3/16″ radius relief.