19 Best Ball End Mills

 

EnPointâ„¢ Solid Carbide 2 Flutes Ballnose End Mill 18 3175mm Shank 18 Cutter Dia 22mm Flute Length CNC Center Cutting Spiral Ball Nose Milling Bit for Hardwood Acrylic PVC Plastic Cameos

EnPointâ„¢ Solid Carbide 2 Flutes Ballnose End Mill 1/8″ 3.175mm Shank 1/8″ Cutter Dia 22mm Flute Length CNC Center Cutting Spiral Ball Nose Milling Bit for Hardwood Acrylic PVC Plastic Cameos

EnPointâ„¢ Solid Carbide 2 Flutes Ballnose End Mill 1/8″ 3.175mm Shank 1/8″ Cutter Dia 22mm Flute Length CNC Center Cutting Spiral Ball Nose Milling Bit for Hardwood Acrylic PVC Plastic Cameos - Tungsten carbide provides high hardness, resistant to high temperature and corrosion for longer life. Designed with large helical chip clearance groove to prevent chips sticking or packing in the flutes. Extremely sharp cutting edge produces an excellent surface finish less build-up heat. Ballnose suitable for working on large-scale relif cameos and curved surfaces. 2 flutes allow higher feedrates than single flute end mills cnc qualified, center cutting.

 

14 X 38 X 4-12 X 6-14 HSS 4 FLUTE BALL END MILL

1/4 X 3/8 X 4-1/2 X 6-1/4 HSS 4 FLUTE BALL END MILL

1/4 X 3/8 X 4-1/2 X 6-1/4 HSS 4 FLUTE BALL END MILL - 2-1/2″ overall length. 500″ length of cut. Solid carbide ticn coated made in usa. 1/16″ (0625″) cutting diameter. 1/8″ shank.

 

Richards Micro Tool 887XB-F5R10-031 Long Ball End Mill 3 Flute Carbide 0031 Diameter 250 Over All Length 0155 Flute Length 0300 Reach Length

Richards Micro Tool 887XB-F5R10-.031 Long Ball End Mill, 3 Flute, Carbide, 0.031″ Diameter, 2.50″ Over All Length, 0.155″ Flute Length, 0.300″ Reach Length

Richards Micro Tool 887XB-F5R10-.031 Long Ball End Mill, 3 Flute, Carbide, 0.031″ Diameter, 2.50″ Over All Length, 0.155″ Flute Length, 0.300″ Reach Length - Over all length 250 with helix angle 30deg. Flute length 0155[5x]. Number of flutes 3. Reach length 0300[10x]. 0031 diameter and 0125 shank diameter.

 

1 PC YG1 4 FLUTE 316 BALL END MILL SOLID CARBIDE X 58 LOC X 2 OAL CNC BIT

1 PC YG1 4 FLUTE 3/16 BALL END MILL SOLID CARBIDE X 5/8 LOC X 2 OAL CNC BIT

1 PC YG1 4 FLUTE 3/16 BALL END MILL SOLID CARBIDE X 5/8 LOC X 2 OAL CNC BIT - 3/16″ cutting diameter x 3/16″ shank diameter x 5/8″ length of cut x 2″ overall length. High precision solid carbide end mill(s) made from the largest end mill manufacturer in the world. Our part # yg1-e5250012. Precision ground using the highest quality grinding wheels. 4 flutes, ball nose, single end 30° rh spiral.

 

EnPoint TiAlN Coating Aluminum Stainless Steel Cutting 2-Flute Ball nose End Mill 532 4mm Shank 175mm Cutter Dia 7mm Flute Length Round Bottom CNC Milling Spiral Router Bits for Cast Iron Carbon Steel Tool Steel

EnPoint® TiAlN Coating Aluminum Stainless Steel Cutting 2-Flute Ball nose End Mill 5/32″ 4mm Shank 1.75mm Cutter Dia 7mm Flute Length Round Bottom CNC Milling Spiral Router Bits for Cast Iron Carbon Steel Tool Steel

EnPoint® TiAlN Coating Aluminum Stainless Steel Cutting 2-Flute Ball nose End Mill 5/32″ 4mm Shank 1.75mm Cutter Dia 7mm Flute Length Round Bottom CNC Milling Spiral Router Bits for Cast Iron Carbon Steel Tool Steel - Ballnose for producing round bottomed grooves in hardwood and softwood, plywood & composites. 2 flutes allows higher feedrates and provides great chip clearance to prevent chips from sticking. It is mainly suitable for milling materials from soft plastics to tough aerospace alloys including aluminum, cast iton, carbon steel, tool steel, stainless steel, mold and alloy steels. With tialn coating increases cutting speed and tool life as well as improving the surface finish used to add a radius between perpendicular faces to reduce stress concentrations. Produced from ultra-fine submicron nano grade solid carbide for maximum tool strength and durablity.

 

End Mill Set 6 Piece 2 Flute Ball HSS

End Mill Set, 6 Piece 2 Flute Ball, HSS

End Mill Set, 6 Piece 2 Flute Ball, HSS - 1/8″ through 3/8″ end mills have 3/8″ shank, 1/2″ end mills have 1/2″ shank. Includes 1/8″ 3/16″ 1/4″ 5/16″ 3/8″ 1/2″ end mills. Center cutting end mills. 2 flute ball (round end) end mills. 6 piece hss end mill set.

 

10M X 10M X 16M LOC 2  OAL 4 FL CARBIDE BALL END MILL

10M X 10M X 16M LOC 2 ” OAL 4 FL CARBIDE BALL END MILL

10M X 10M X 16M LOC 2 ” OAL 4 FL CARBIDE BALL END MILL - Produced from a premium ultra fine submicron grade solid carbide for great tool strength, durability. The spiral cutting egde provides sharp cutting and improves work efficiency. Large single flute for maximum chip clearance space for chip evacuation center cutting for straight plunging or ramping down into the workpiece. With a unique mirror grinding processing for cutting edge produces an excellent surface finish. It is mainly used for the engraving and cutting of aluminum, acrylic, medium density fiberboard, corlor plates and pvc etc.

 

Kodiak Cutting Tools KCT133219 USA Made  Solid Premium Carbide Ball Nose End Mill AlTiN Coated 4 Flute 18 Shank 14 Length of Cut 1-12 Overall Length 116

Kodiak Cutting Tools KCT133219 USA Made Solid Premium Carbide Ball Nose End Mill, AlTiN Coated, 4 Flute, 1/8″ Shank, 1/4″ Length of Cut, 1-1/2″ Overall Length, 1/16″

Kodiak Cutting Tools KCT133219 USA Made Solid Premium Carbide Ball Nose End Mill, AlTiN Coated, 4 Flute, 1/8″ Shank, 1/4″ Length of Cut, 1-1/2″ Overall Length, 1/16″ - 0001″/-. 0004″altin is a high performance coating for milling, tapping and drilling in stainless steels, carbon steels, alloy steels, titanium and cast iron. It is exceptional in difficult to machine materials where adhesive wear is particularly high. 002″shank diameter tolerance -. 000″/-. 1/16 inch diameter solid carbide end mill, coated 1/8″ shank 1/4″ length of cut 1-1/2″ overall length 4 flute carbide, altin coated diameter tolerance +. This coating is extremely heat resistant and can be used with or without coolant.

 

End Mill Set 6 Piece 4 Flute Ball HSS

End Mill Set, 6 Piece 4 Flute Ball, HSS

End Mill Set, 6 Piece 4 Flute Ball, HSS - Center cutting end mills. 6 piece hss end mill set. 1/8″ through 3/8″ end mills have 3/8″ shank, 1/2″ end mills have 1/2″ shank. 4 flute ball (round end) end mills. Includes 1/8″ 3/16″ 1/4″ 5/16″ 3/8″ 1/2″ end mills.

 

EM-R12 38 2 Flute Single End Ball End Mill- 38 Shank High Speed Steel

EM-R12 3/8″ 2 Flute Single End Ball End Mill- 3/8″ Shank, High Speed Steel

EM-R12 3/8″ 2 Flute Single End Ball End Mill- 3/8″ Shank, High Speed Steel - Flute length 3/4″. Cutting diameter 3/8″. Shank diameter 3/8″. High speed steel. Overall length 2 1/2″.

 

EM-RR13 - 1332 2 Flute Ball Double End Mill - 12 Shank High Speed Steel

EM-RR13 – 13/32″ 2 Flute Ball Double End Mill – 1/2″ Shank, High Speed Steel

EM-RR13 – 13/32″ 2 Flute Ball Double End Mill – 1/2″ Shank, High Speed Steel - High speed steel. . Right hand cut. Do not make any assumptions about the relative diameters of the shank and the cutting end from the photo. Note photo shows a double end ball end mill, but not necessarily this specific size.

 

Niagara Cutter DIAB230-0250-D3-B0-Z2 DIAB230 Carbide Ball End Mill CVDDIA Finish 2 Flutes 14 Cutting Diameter 14 Shank Diameter 2-12 Overall Length 34

Niagara Cutter DIAB230-0.250-D3-B.0-Z2 DIAB230 Carbide Ball End Mill, CVDDIA Finish, 2 Flutes, 1/4″ Cutting Diameter, 1/4″ Shank Diameter, 2-1/2″ Overall Length, 3/4″

Niagara Cutter DIAB230-0.250-D3-B.0-Z2 DIAB230 Carbide Ball End Mill, CVDDIA Finish, 2 Flutes, 1/4″ Cutting Diameter, 1/4″ Shank Diameter, 2-1/2″ Overall Length, 3/4″ - Ball nose end mills (also called ball end) create contoured surfaces. 30-degree helix provides the efficient cutting action and chip evacuation. Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material. Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures. Diamond coating offers exceptional wear resistance for the machining of abrasive non-ferrous metals, ceramics and composite materials.

 

EM-R10 516 2 Flute Single End Ball End Mill- 38 Shank High Speed Steel

EM-R10 5/16″ 2 Flute Single End Ball End Mill- 3/8″ Shank, High Speed Steel

EM-R10 5/16″ 2 Flute Single End Ball End Mill- 3/8″ Shank, High Speed Steel - Flute length 3/4″. Shank diameter 3/8″. High speed steel. Cutting diameter 5/16″. Overall length 2 1/2″.

 

HHIP 5841-0875 78 x 78 2 Flute High Speed Steel Single End Ball End Mill

HHIP 5841-0875 7/8 x 7/8″ 2 Flute High Speed Steel Single End Ball End Mill

HHIP 5841-0875 7/8 x 7/8″ 2 Flute High Speed Steel Single End Ball End Mill - ~ overall length is 4-1/4. ~ Flute length is 2. ~ Shank diameter is 7/8. 7/8 x 7/8″ 2 flute high speed steel single end ball end mill ~ diameter of the mill is 7/8.

 

HHIP 5842-0187 316 x 38 2 Flute M42 Cobalt Single End Ball End Mill

HHIP 5842-0187 3/16″ x 3/8″ 2 Flute M42 Cobalt Single End Ball End Mill

HHIP 5842-0187 3/16″ x 3/8″ 2 Flute M42 Cobalt Single End Ball End Mill - 3/16 x 3/8″ 2 flute m42 cobalt single end ball end mill ~ m42 (8%) cobalt ~ diameter of the mill is 3/16. ~ Shank diameter is 3/8. ~ Overall length is 2-5/16. ~ flute length is 1/2. .

 

EM-R4 18 2 Flute Single End Ball End Mill- 38 Shank High Speed Steel

EM-R4 1/8″ 2 Flute Single End Ball End Mill- 3/8″ Shank, High Speed Steel

EM-R4 1/8″ 2 Flute Single End Ball End Mill- 3/8″ Shank, High Speed Steel - Shank diameter 3/8″. Flute length 3/8″. Cutting diameter 1/8″. Overall length 2 5/16″. High speed steel.

 

Kodiak Cutting Tools KCT133032 USA Made Solid Carbide Ball Nose End Mill 4 Flute 38 Shank 1 Length of Cut 2-12 Overall Length 38 Diameter

Kodiak Cutting Tools KCT133032 USA Made Solid Carbide Ball Nose End Mill, 4 Flute, 3/8″ Shank, 1″ Length of Cut, 2-1/2″ Overall Length, 3/8″ Diameter

Kodiak Cutting Tools KCT133032 USA Made Solid Carbide Ball Nose End Mill, 4 Flute, 3/8″ Shank, 1″ Length of Cut, 2-1/2″ Overall Length, 3/8″ Diameter - 3/8 inch diameter ball nose solid carbide end mill, single end 3/8″ shank 1″ length of cut 2-1/2″ overall length 4 flute carbide, single end diameter tolerance +. 002″shank diameter tolerance -. 0001″/-. 000″/-. . 0004″.

 

Kodiak Cutting Tools KCT133527 USA Made  Ball Nose Premium Carbide End Mill AlTiN Coated 4 Flute 12 Shank 1 Length of Cut 3 Overall Length 12 Diameter

Kodiak Cutting Tools KCT133527 USA Made Ball Nose Premium Carbide End Mill, AlTiN Coated, 4 Flute, 1/2″ Shank, 1″ Length of Cut, 3″ Overall Length, 1/2″ Diameter

Kodiak Cutting Tools KCT133527 USA Made Ball Nose Premium Carbide End Mill, AlTiN Coated, 4 Flute, 1/2″ Shank, 1″ Length of Cut, 3″ Overall Length, 1/2″ Diameter - This coating is extremely heat resistant and can be used with or without coolant. 1/2 inch diameter solid carbide end mill, coated 1/2″ shank 1″ length of cut 3″ overall length 4 flute carbide, altin coated diameter tolerance +. 0004″altin is a high performance coating for milling, tapping and drilling in stainless steels, carbon steels, alloy steels, titanium and cast iron. 0001″/-. 002″shank diameter tolerance -. 000″/-. It is exceptional in difficult to machine materials where adhesive wear is particularly high.

 

Drill America DWCT12B HSS 2 Flute Double End Ball End Mill 116 x 316

Drill America DWCT12B HSS 2 Flute Double End Ball End Mill, 1/16″ x 3/16″

Drill America DWCT12B HSS 2 Flute Double End Ball End Mill, 1/16″ x 3/16″ - 1/16 x 3/16 hss 2 flute double end ball end mill. .