22 Top Gear Pullers

 

CTA Tools 8059 3-Jaw Adjustable Gear Puller 17-Inch

CTA Tools 8059 3-Jaw Adjustable Gear Puller, 17-Inch

CTA Tools 8059 3-Jaw Adjustable Gear Puller, 17-Inch - Heavy-duty construction allows for strength and durability. It is forged from alloy, heat-treated steel, with a fine-threaded center screw for extra pulling power. Cta tools 8059 3-jaw adjustable gear puller, 17-inch has a capacity of 13-tons. California prop 65, warning, this product contains chemicals known to the state of california to cause cancer, birth defects or other reproductive harm. The jaws are adjustable to broaden applications. Whether tuning up your ’68 corvette or changing the oil on a john deere tractor, cta can supply you with the tools needed to do the job. The reach for this tool is 15-inch and the screw length is 13-inch.

 

Capri Tools 10500 3-Jaws Gear Puller 3-Inch

Capri Tools 10500 3-Jaws Gear Puller, 3-Inch

Capri Tools 10500 3-Jaws Gear Puller, 3-Inch - This gear puller set is designed to pull slide gears, flywheels, and pulleys efficently. The jaws are constructed with drop forged steel for maximum strength. This gear puller set is designed for shallow, deep, inner and outer grip positions. Comes pregreased to use right out of the box, saving you time and money.

 

OEMTOOLS 25900  23 Jaw 2-Ton Ratcheting Gear Puller

OEMTOOLS 25900 2/3 Jaw 2-Ton Ratcheting Gear Puller

OEMTOOLS 25900 2/3 Jaw 2-Ton Ratcheting Gear Puller - There are no pins or nuts to drop or loose. Max reach 2-5/8 in max spread 3-1/4 in. Made with chrome moly steel for strength. Jaws lock in place and make pulling fast and easy. Quickly converts to 2, 3 or reversible puller.

 

CTA Tools 8025 2-Jaw Adjustable Gear Puller 12-Inch

CTA Tools 8025 2-Jaw Adjustable Gear Puller, 12-Inch

CTA Tools 8025 2-Jaw Adjustable Gear Puller, 12-Inch - It is forged from alloy, heat-treated steel, with a fine-threaded center screw for extra pulling power. Heavy-duty construction allows for strength and durability. California prop 65, warning, this product contains chemicals known to the state of california to cause cancer, birth defects or other reproductive harm. The jaws are adjustable to broaden applications. Whether tuning up your ’68 corvette or changing the oil on a john deere tractor, cta can supply you with the tools needed to do the job. . Cta tools 8025 2-jaw adjustable gear puller, 12-inch has a capacity of 13-tons. The reach for this tool is 11-inch and the screw length is 13-inch.

 

Two Jaws Gear Puller - TOOGOOR35x45 Type Black Plated Two Jaws Gear Puller Armature Bearing Puller Forging

Two Jaws Gear Puller – TOOGOO(R)35×45 Type Black Plated Two Jaws Gear Puller Armature Bearing Puller Forging

Two Jaws Gear Puller – TOOGOO(R)35×45 Type Black Plated Two Jaws Gear Puller Armature Bearing Puller Forging - The puller can be bilateral rotation. The point of the mandril through a special heat treatment process makes the product more solid and durable. Specialize in tearing down ball joint in parts of the combined mandrel brake system. Two-jaw gear puller,easy to operate. It is used to tear down ball bearing,gear and so on.

 

OEMTOOLS 27009  Timing Gear Puller

OEMTOOLS 27009 Timing Gear Puller

OEMTOOLS 27009 Timing Gear Puller - Comes in sturdy blow mold storage case. Set includes 5 in yoke and (2) 4 in long 5/16 in x 18 bolts. Heat treated for strength.

 

3-Jaw Gear Puller 10 Tools Equipment Hand Tools

3-Jaw Gear Puller 10″” Tools Equipment Hand Tools

3-Jaw Gear Puller 10″” Tools Equipment Hand Tools - This product meets the large package requirement per ups/fedex. The estimated shipping cost will include this fee. Orders can take approx. 2-4 weeks to be shipped. 3-jaw gear puller 10″” this is a special order item.

 

8 23-Jaw Gear Puller

8″ 2/3-Jaw Gear Puller

8″ 2/3-Jaw Gear Puller - Length 75 “. Height 525 “. 8045b. Width 55 “.

 

Craftsman 2 Jaw Large Gear Puller Mechanics Auto Tool

Craftsman 2 Jaw Large Gear Puller. Mechanics & Auto Tool.

Craftsman 2 Jaw Large Gear Puller. Mechanics & Auto Tool. - Made of high alloy steel, strong and rust-resistant. Swap the two arms end-to-end and put the tip end in or out, for the custom hold you desire. Use the one-piece tool to remove gears, pull auto axles and more. Overall dimensions 1″ x 12″ x 85″ includes craftsman lifetime warranty. Craftsman 2-jaw large gear puller features reversible grips of two identical arms.

 

TEKTON 5686 4-Inch 2-Jaw Gear Puller

TEKTON 5686 4-Inch 2-Jaw Gear Puller

TEKTON 5686 4-Inch 2-Jaw Gear Puller - Jaw spread 6-1/4 in jaw reach 2-1/2 in. Two-jaw design slips into tight spaces to pull gears, pulleys, and flywheels off shaft without damage. Cold rolled, acme-threaded steel drive screw for smooth operation even under high stress. High-strength forged and hardened steel jaw arms. Universal 8-position reversible jaws offer inside or outside grip and short, standard, long or extra long reach.

 

OEMTOOLS 25916  23 Jaw 5-Ton Ratcheting Gear Puller

OEMTOOLS 25916 2/3 Jaw 5-Ton Ratcheting Gear Puller

OEMTOOLS 25916 2/3 Jaw 5-Ton Ratcheting Gear Puller - Jaws lock in place and make pulling fast and easy. Comes assembled in clamshell package. There are no pins or nuts to drop or loose. Quickly converts to 2, 3 or reversible puller. Made with chrome moly steel for strength.

 

CTA Tools 8000 2-Jaw AdjustableReversible Gear Puller 4-Inch

CTA Tools 8000 2-Jaw Adjustable/Reversible Gear Puller, 4-Inch

CTA Tools 8000 2-Jaw Adjustable/Reversible Gear Puller, 4-Inch - The reach for this tool is 3-1/2-inch and the screw length is 5-inch. The jaws are adjustable and/or reversible to broaden applications. It is forged from alloy, heat-treated steel, with a fine-threaded center screw for extra pulling power. Whether tuning up your ‘68 corvette or changing the oil on a john deere tractor, cta can supply you with the tools needed to do the job. Heavy-duty construction allows for strength and durability. Cta tools 8000 2-jaw adjustable/reversible gear puller, 4-inch has a capacity of 2-tons.

 

CTA Tools 8010 2-Jaw AdjustableReversible Gear Puller 7-Inch

CTA Tools 8010 2-Jaw Adjustable/Reversible Gear Puller, 7-Inch

CTA Tools 8010 2-Jaw Adjustable/Reversible Gear Puller, 7-Inch - Whether tuning up your ‘68 corvette or changing the oil on a john deere tractor, cta can supply you with the tools needed to do the job. Cta tools 8010 2-jaw adjustable/reversible gear puller, 7-inch has a capacity of 5-tons. The reach for this tool is 5-1/2-inch and the screw length is 7-inch. . California prop 65, warning, this product contains chemicals known to the state of california to cause cancer, birth defects or other reproductive harm. Heavy-duty construction allows for strength and durability. The jaws are adjustable and/or reversible to broaden applications. It is forged from alloy, heat-treated steel, with a fine-threaded center screw for extra pulling power.

 

AMPRO T75904 Timing Gear Puller

AMPRO T75904 Timing Gear Puller

AMPRO T75904 Timing Gear Puller - Its drop forged, plated steel yoke resists corrosion, and it has a heat treated center bolt. The timing gear puller removes timing gears, fan pulleys, balancers and other automotive components with tapped holes.

 

Grip 21140 14-Piece Gear Puller and Bearing Splitter Set

Grip 21140 14-Piece Gear Puller and Bearing Splitter Set

Grip 21140 14-Piece Gear Puller and Bearing Splitter Set - Drop forged, heat treated steel attachments hardened and tempered, precision machined steel bolts. Removes gears, pulleys, and steering wheels. 4-pc 6-3/4″ connecting bolts 3/8″ -16 thread x 5/16″, 18 thread with nuts , 1-pc 5-1/2″ push rod 9/16″ -10 thread , 1-pc bracket , cone head for push rod , flat head for push rod. Includes 2-pc bearing separator 9/32″-3″2-pc, bolts for bearing separator with nuts and washers 5-1/2″ -12 thread, 2-pc 6″ pawls, 3/8″ -16 thread with nuts. Separates ball bearings.

 

TEKTON 5702 Gear Puller 4-Piece

TEKTON 5702 Gear Puller, 4-Piece

TEKTON 5702 Gear Puller, 4-Piece - Universal 4- or 8-position reversible jaws offer inside or outside grip and short, standard, long or extra long reach. Set includes (1) 3 in 3-jaw gear puller, (1) 4 in 3-jaw gear puller, (1) 6 in 3-jaw gear puller, (1) 8 in 3-jaw gear puller. Three-jaw design evenly distributes pulling forces to slide gears, pulleys, and flywheels off shaft without damage. Cold rolled, acme-threaded steel drive screw for smooth operation even under high stress. High-strength forged and hardened steel jaw arms.

 

Kukko 20-10-Sp-T 2-Arm Gear Puller 120 mm Span by Kukko

Kukko 20-10-Sp-T 2-Arm Gear Puller 120 mm Span by Kukko

Kukko 20-10-Sp-T 2-Arm Gear Puller 120 mm Span by Kukko - 2materialscm415 hardened 40 °~45 °. From a small passenger car to auto trucks and farm/industrial equipments. 1hydraulic ram included for labor saving. This set includes a 10ton hydraulic ram kit which is self contained and doesnot need an outside pump. Kukko 20-10-sp-t 2-arm gear puller 120 mm span.

 

Stanley Proto J4037 2 Jaw Gear Puller 10-Inch

Stanley Proto J4037 2 Jaw Gear Puller, 10-Inch

Stanley Proto J4037 2 Jaw Gear Puller, 10-Inch - Stanley j4037 2 jaw gear puller, 10-inch maximum spread 9-inch maximum reach 2 jaw gear puller, 10-inch maximum spread 9-inch maximum reach. .

 

QuestCraft 5PC BLIND HOLE BEARING GEAR PULLER REMOVAL KIT 4 COLLECT 1 SLIDE HAMMER OEM

QuestCraft 5PC BLIND HOLE BEARING GEAR PULLER REMOVAL KIT 4 COLLECT & 1 SLIDE HAMMER OEM

QuestCraft 5PC BLIND HOLE BEARING GEAR PULLER REMOVAL KIT 4 COLLECT & 1 SLIDE HAMMER OEM - 3 lb slide hammer with thandle for secure grip overall length 14-3/4″and sliding length is 10-3/4″. Four collets 3/8″ to 1/2″, 9/16″ to 11/16″, 5/8″ to 1″, 1″ to 1-1/4″. Slide hammer, four collets 3/8″ to 1/2″, 9/16″ to 11/16″, 5/8″ to 1″, 1″ to 1-1/4″. Blow mold case. Chrome-plated shaft for smooth operation.

 

New Blind Hole 5pcs Slide Hammer Pilot Bearing Gear Puller Removel Kit

New Blind Hole 5pcs Slide Hammer Pilot Bearing Gear Puller Removel Kit

New Blind Hole 5pcs Slide Hammer Pilot Bearing Gear Puller Removel Kit - Four collets which fit a wide range of applications. For pulling jobs requiring an internal pull, such as pilot bearings . Four collet sizes 3/8″ to 1/2″, 9/16″ to 11/16″, 5/8″ to 1″, 1″ to 1-1/4″. Select the appropriate sized collet by comparing it with the application. Insert collet, expand it to fit the hole, and attach the slide hammer assembly.

 

TEKTON 5696 Gear Puller Set 3-Piece

TEKTON 5696 Gear Puller Set, 3-Piece

TEKTON 5696 Gear Puller Set, 3-Piece - Cold rolled, acme-threaded steel drive screw for smooth operation even under high stress. Universal 4- or 8-position reversible jaws offer inside or outside grip and short, standard, long or extra long reach. Three-jaw design evenly distributes pulling forces to slide gears, pulleys, and flywheels off shaft without damage. High-strength forged and hardened steel jaw arms. Set includes (1) 3 in 3-jaw gear puller, (1) 4 in 3-jaw gear puller, (1) 6 in 3-jaw gear puller.

 

Stanley Proto J4035 2 Jaw Gear Puller 7-Inch

Stanley Proto J4035 2 Jaw Gear Puller, 7-Inch

Stanley Proto J4035 2 Jaw Gear Puller, 7-Inch - Stanley j4035 2 jaw gear puller, 7-inch maximum spread 5-1/2-inch maximum reach 2 jaw gear puller, 7-inch maximum spread 5-1/2-inch maximum reach. .





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.