22 Top Wood Lathes

 

DELTA 46-490 Ball Bearing Center for Wood Lathes

DELTA 46-490 Ball Bearing Center for Wood Lathes

DELTA 46-490 Ball Bearing Center for Wood Lathes - With a number two morse taper to fit standard wood lathe tailstocks, this ball bearing center comes with three replaceable centers and a wrench. The delta 46-490 ball bearing center for wood lathes comes with double-row, sealed, lubricated-for-life bearings to take exceptionally heavy radial and thrust loads and for husky and true running with no chatter. It is used when only minimal pressure is to be applied, and you don’t want to damage the product by using a pointed or cupped center and the holding power is provided by the headstock. The “flat” interchangeable center tip is designed to wedge your material between the headstock and the tailstock without marring it and still allowing it to rotate.

 

PSI Woodworking LCTEN HSS Wood Lathe Tenon Tool

PSI Woodworking LCTEN HSS Wood Lathe Tenon Tool

PSI Woodworking LCTEN HSS Wood Lathe Tenon Tool - High speed tenon tool # lcten. A must tool for any pen maker for cutting perfect tenons on pen center bands. The blade is 1-1/4″ wide and 5″ long with a 4″ wood handle. Only 1/16″ thick get a clean, sharp and accurate 90 degree inside angle corner for delicate turnings.

 

PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System

PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System

PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System - Includes pin jaws which hold inside holes 1-to-2-1/4-inch, and a screw chuck. Includes #2 round jaws, for dowels 7/8-to-1-1/2-inch holes 1-1/4-to-2-inch. Includes four (4) self-centering jaw sets to hold round and square stock for turning, pre-threaded for 1x8tpi, and has an adapter for 3/4x16tpi spindles. Includes #1 step jaws for dowels 3/32-to-1-3/8-inch, holes 11/16-to-2-3/8-inch. Includes #3 round jaws, external grip 3-1/16-to-4-3/8-inch.

 

PSI Woodworking LCENT4 4 Piece Wood Lathe Center Set for 2 MT

PSI Woodworking LCENT4 4 Piece Wood Lathe Center Set for #2 MT

PSI Woodworking LCENT4 4 Piece Wood Lathe Center Set for #2 MT - Hollow center for drilling 5/16-inch (#2 mt) through holes (for lamps, etc). Live ball bearing tailstock center with cup and point. 1-inch diameter headstock spur center for standard spindles. Packaged in 2 wood boxes. 5/8-inch diameter headstock spur center for narrow spindles.

 

PSI Woodworking LCPM3 3 Piece HSS Pen Turning Lathe Chisel Set

PSI Woodworking LCPM3 3 Piece HSS Pen Turning Lathe Chisel Set

PSI Woodworking LCPM3 3 Piece HSS Pen Turning Lathe Chisel Set - Comes in an attractive wooden display box. Upgrade to this benjamin’s best professional chisel set. 3/8-inch gouge for rough cutting,1/8-inch parting tool for cutting tenons, and parting-off. Chisels are 11-inches with 8-inch handles. High speed steel stays sharper longer and cuts faster. 1/2-inch oval skew for smooth cuts and finished surfaces.

 

12hp 40 Inch 4 Speed Power Wood Turning Lathe 14x40 In

1/2hp 40 Inch 4 Speed Power Wood Turning Lathe 14×40 In

1/2hp 40 Inch 4 Speed Power Wood Turning Lathe 14×40 In - Overall measurements, 1457″ high, 945″ wide, 5905″ long. Motor, 350 watt, 1400 rpm, 110 volt ac, mounted to headstock. Wood lathes turning capacity 14″ maximum diameter over bed 40″ maximum between centers. Wood lathe pulley system, four speed, v belts. Spindle speeds 810 rpm to 3400 rpm.

 

Grizzly H3403 Cupped Live Center for Wood Lathe MT1

Grizzly H3403 Cupped Live Center for Wood Lathe, MT1

Grizzly H3403 Cupped Live Center for Wood Lathe, MT1 - Size mt #1. All ball bearing construction results in very little turning resistance even when loaded. . Cupped centers provide better grip and prevent splitting.

 

Wood Lathe Copier Duplicator Device Copying Duplicating

Wood Lathe Copier Duplicator Device Copying Duplicating

Wood Lathe Copier Duplicator Device Copying Duplicating - Center height 59 inches to 827 inches. Copy and duplicate any wood lathe project. Max travel of tie rod 1 3/8 inches. Max length of wood pieces 39 inches. Universal fits most lathes overall size = 485″ x 15″ x 13″.

 

MT1 Wood Lathe Live Center Set Morse Taper 1 for Wood Lathe

MT1 Wood Lathe Live Center Set Morse Taper 1 for Wood Lathe

MT1 Wood Lathe Live Center Set Morse Taper 1 for Wood Lathe - Dust proof seal preventing cutting liquid and dust enter into bearing thus prolong service time. Shaft is made of alloy steel through heat treatment to rc 60-62. Designed for wood lathe in medium speed and medium load environment. Mt1 l1 69, l2 74, l3 74, l4 91, a 12065, b 56. Morse taper 1, mt1 shank.

 

2 Steel Wood Lathe Face Plate 34 x 16tpi Threaded

2″ Steel Wood Lathe Face Plate, 3/4″ x 16tpi Threaded

2″ Steel Wood Lathe Face Plate, 3/4″ x 16tpi Threaded - This is a well made, heavy faceplate. At 3/8″ thick, it is rigid and well balanced.

 

DELTA 46-933 Spur Drive for Wood Lathes

DELTA 46-933 Spur Drive for Wood Lathes

DELTA 46-933 Spur Drive for Wood Lathes - 3/8 lb. Has replaceable center pin, hardened and polished. For headstock.

 

Mophorn Metal Lathe 7 x 12 Inch Precision Mini Lathe 2500 RPM 600W Mini Metal Lathe Variable Speed Milling Benchtop Wood Lathe 25mm Tailstock Sleeve Digital Control System7 x 12 Inch 600W

Mophorn Metal Lathe 7 x 12 Inch Precision Mini Lathe 2500 RPM 600W Mini Metal Lathe Variable Speed Milling Benchtop Wood Lathe 25mm Tailstock Sleeve Digital Control System(7 x 12 Inch 600W)

Mophorn Metal Lathe 7 x 12 Inch Precision Mini Lathe 2500 RPM 600W Mini Metal Lathe Variable Speed Milling Benchtop Wood Lathe 25mm Tailstock Sleeve Digital Control System(7 x 12 Inch 600W) - This precision mini lathe is designed to perform various types of metal turning this machine can be used in areas such as mini precision parts processing, sample processing and modeling works it is perfect for the hobbyist or modeler who is looking to add finite detail to their construction project. This micro lathe with a number of electronic control system for the magnetic induction digital single-chip control the transition wheel system can be 2-speed mechanical speed. This 600w miniature lathe is a benchtop lathe can be applied in industry and school teaching, vehicle maintenance, home maintenance, scientific research units, such as single-processing or small batch production of the ideal equipment. Distance between centers12″ swing over bed 7″ machine bed width 394″(100 mm). Power of motor 600wvariable speedtailstock sleeveφ25mmspindle speed50-2500rpm.

 

SAVANNAH HSS WOOD LATHE CHISEL SET 8-PIECE SET with Storage Tool Roll 32 x 24

SAVANNAH HSS WOOD LATHE CHISEL SET, 8-PIECE SET with Storage Tool Roll 32″ x 24″

SAVANNAH HSS WOOD LATHE CHISEL SET, 8-PIECE SET with Storage Tool Roll 32″ x 24″ - Set includes 8 essential chisels 1″ roughing gouge, 3/4″ roughing gouge, 1/2″ spindle gouge. 1″ skew chisel, 5/8″ skew chisel, 5/8″ round nose scraper,. Also includes a 32″ x 24″ turning tool storage roll to protect and store your tools. The m2 high speed steel 5 1/4″ blades outlast carbon steel 6 to 1 and will give you years of use. 3/16″ parting tool, 5/8″ spear scraper.

 

PSI Woodworking LCBEAD4 4 Piece HSS Bead Cutting Lathe Chisel Set

PSI Woodworking LCBEAD4 4 Piece HSS Bead Cutting Lathe Chisel Set

PSI Woodworking LCBEAD4 4 Piece HSS Bead Cutting Lathe Chisel Set - Produces excellent well formed beads you can be proud of. Packaged in an attractive wood carrying case. . This set includes tools to create 3mm, 6mm, 8mm and 10mm beads. Turn beads like at expert take the mystery and skill out of cutting perfect beads to exact sizes with this 4 piece hss bead cutting chisel set. The tools are about 14″ long with hss blades and hardwood handles.

 

New Replacement Belt Harbor Freight Central Machinery Mini Wood Lathe 65345

New Replacement Belt Harbor Freight Central Machinery Mini Wood Lathe 65345

New Replacement Belt Harbor Freight Central Machinery Mini Wood Lathe 65345 - New rubber belt. Heavy-duty, precision ground cast iron bed and cast iron legs ensure stability and minimal vibration. Motor 2 hp, 110v, single-phase. Quick lock/release levers for tailstock and headstock 0 degree, 60 degree, 90 degree, 120 degree and 180 degree headstock rotation. Lever speed adjustment, 10 speeds 600, 2400 rpm.

 

Shop Fox W1836 Bench Top Wood Lathe 12 x 15

Shop Fox W1836 Bench Top Wood Lathe, 12″ x 15″

Shop Fox W1836 Bench Top Wood Lathe, 12″ x 15″ - 24 indexes in increments of 15 allow evenly spaced cuts while the headstock stays in a locked position which opens new possibilities not available on most bench top lathes. A powerful 3/4 hp motor with electronic variable-speed spindle control and a digital rpm readout for precise speed adjustments make this lathe a top choice. Heavy-duty cast iron construction and rubber feet for increased stability and smooth turning operations. The shop fox w1836 wood lathe is packed with features that wood turners love.

 

NOVA 24221 16 x 24 8 Speed Wood Lathe Black

NOVA 24221 16 x 24″ 8 Speed Wood Lathe, Black

NOVA 24221 16 x 24″ 8 Speed Wood Lathe, Black - Backed by a full replacement 2-year warranty on all parts, and a further 3-year limited warranty on all parts excluding motor, electronics, consumables, for a total of 5-years limited warranty. 5hp ac motor, belt, stand, 2mt live center, 2mt spur/drive center, 3″ faceplate, 12′ toolrest, manual and fastenings. 8 speed range, from a low 215rpm through to a high of 3600rpm. Note this unit replaces the older nova 1624 lathe, all old accessories and parts are interchangeable. This lathe offers a solid 1. Designed by teknatool international, innovating since 1955. 1624 ii 16-inch x 24-inch wood lathe is updated with a new look for 2017, with updated nova black color and decals. Steel and cast iron stand included as standard equipment. Includes 1. Excellent entry level lathe that has enough versatility and power to give many years of turning. Available in 11/4″8tpi thread. Call our customer service center on 727-954-3433. Apart from the look, this model provides the same feature set as the very popular previous model. 5hp ac motor, 16″ swing capacity (expandable to 29″ capacity outboard with optional outrigger accessory) and 24″ between centers, expandable in 20″ increments with the optional bed extension accessory. Full swivel head functionality and solid cast iron components complete the package.

 

Simple Turning Hollowing Carbide Wood Lathe Tool - Unhandled Full Size Bowl Turning Tool

Simple Turning & Hollowing Carbide Wood Lathe Tool – Unhandled Full Size Bowl Turning Tool

Simple Turning & Hollowing Carbide Wood Lathe Tool – Unhandled Full Size Bowl Turning Tool - As you turn and hollow your vessel with this tool you’ll quickly discover how simple it is to use. It won’t be long until it’s your favorite tool for doing 90 percent of the shaping work required on the inside and outside of most vessels. Both beginners and experts alike appreciate the simplicity with which your project can be quickly turned and hollowed to the desired shape with this tool. The simple turner & hollowertm is the tool of choice to be used after a block has been roughed into a cylinder. The simpliest to use turning & hollowing tool on the market today.

 

PSI Woodworking LCENTSS21 2 MT with 58-Inch Crown Super Wood Lathe Drive Center

PSI Woodworking LCENTSS21 #2 MT with 5/8-Inch Crown Super Wood Lathe Drive Center

PSI Woodworking LCENTSS21 #2 MT with 5/8-Inch Crown Super Wood Lathe Drive Center - Get a better bite on your spindle with psi’s new 5/8 super center. There is no need to hammer your drive center into the work piece and risk splitting your work. More teeth give a better bite while providing equal pressure and a positive drive.

 

PSI Woodworking LCMINI2 Mini 5-Piece HSS Wood Lathe Chisel Turning Set

PSI Woodworking LCMINI2 Mini 5-Piece HSS Wood Lathe Chisel Turning Set

PSI Woodworking LCMINI2 Mini 5-Piece HSS Wood Lathe Chisel Turning Set - Fantastic buy for five essential chisels. Includes-1/4-inch roughing gouge, 1/8-inch spindle gouge,-1/4-inch round nose scraper, 3/32-inch parting tool,-1/4-inch skew chisel. Premium long lasting hss blades with beautifully turned and stained hardwood handles and brass ferrules. Comes in an attractive wooden display box. Chisels are 10-inch in overall length, with 4-inch blades.

 

SHOP FOX W1752 Mini Wood Lathe

SHOP FOX W1752 Mini Wood Lathe

SHOP FOX W1752 Mini Wood Lathe - All cast iron construction and a 1/2 hp motor provide plenty of power and stability to turn bowls up to 10-inch wide and spindles up to 15-1/2-inch long, or 38-inch long with the optional extended bed. Includes live center, spur center, 3-inch face plate, and tool rest. This stable bench-top wood lathe has six speeds ranging from 480 to 4023 rpm, providing the flexibility for any turning project.

 

PSI Woodworking CUG3418CC Utility Grip 4 Jaw Lathe Chuck System

PSI Woodworking CUG3418CC Utility Grip 4 Jaw Lathe Chuck System

PSI Woodworking CUG3418CC Utility Grip 4 Jaw Lathe Chuck System - Includes screw chuck also includes an allen wrench and a set of tightening levers. Chuck is pre-threaded to 1″ x 8tpi includes 3/4″ x 16tpi adaptor. Heavy duty chrome-plated self-centering chuck will hold your work tight & secure on midi and full size woodworking lathes. Includes #1 step jaws 3/32″ to 1-7/8″ external & 11/32″ to 3-3/8″ internal includes #2 round jaws 1-1/2″ to 3-1/8″ external & 2″ to 3-7/8″ internal. This c series chuck works with all “c” series jaws.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.