23 Coolest Router Lifts

 

JESSEM Rout-R-Lift II Included Router Table System With Phenolic Top

JESSEM Rout-R-Lift II Included Router Table System With Phenolic Top

JESSEM Rout-R-Lift II Included Router Table System With Phenolic Top - Fence position maintained by side mounted adjustable fence tracks. 32″ x 24″ phenolic table with aluminum extruded miter track. Rigid, heavy-duty steel stand with upper and lower stretchers. Mast-r-fence ii router table fence with fully adjustable fence faces. Includes jessem rout-r-lift ii for 3-1/2″-diameter router motors.

 

RTL Router Table Lift

RTL Router Table Lift

RTL Router Table Lift - Faster bit changes and reduced setup times versus crank handle type lifts. No specific model router required. Lower cost. Fits virtually any router and standard router top. New rtl router table lift provides easy and unobstructed access to router adjustments.

 

Rockler Pro Phenolic Router Table Fence FX Router Lift

Rockler Pro Phenolic Router Table, Fence, & FX Router Lift

Rockler Pro Phenolic Router Table, Fence, & FX Router Lift - 3/4″ t-profile miter slot allows you to use precision aftermarket miter gauges, while universal t-tracks in both the fence and table accept stops, hold-downs and more. Fence features a 2-1/2″ o. (2-1/4″ i. Router lift fx includes insert ring with 1-1/2″ opening. ) Dust port. D. Featuring 8-points of plate leveling and 2 locking points. D. The router lift fx accepts the following routers porter-cable 690/890 series, bosch 1617-16-18, dewalt 610, 616, 618. Includes bit safety guard for safe routing. Our brand-new pro tables feature one-piece 3/4″ solid phenolic construction for an ultra-flat, low-friction surface that won’t warp, dent, scratch or delaminate. Includes our acclaimed rockler router lift fx for above-table bit height adjustments and bit changes. Included aluminum pro fence features two adjustable white melamine mdf faces, front- and rear-facing accessory t-tracks and an included dust port and bit guard. 24″ x 32″ table for over five square feet of surface area. Ergonomic t-knobs for easy fence adjustment. Large opening in fence for big router bits. Aluminum fence backer features front- and rear-mounted universal t-tracks that accept 5/16″ t-bolts, 1/4″ t-bolts, and 1/4″ hex bolts. The whiter, brighter finish enhances visibility, while the included router lift fx allows effortless above-table adjustments and bit changes. Includes rockler pro fence with extruded aluminum backer for straight, accurate cuts.

 

JESSEM Mast-R-Lift Excel II Included Complete Router Table System

JESSEM Mast-R-Lift Excel II Included Complete Router Table System

JESSEM Mast-R-Lift Excel II Included Complete Router Table System - Rigid, heavy-duty steel stand with upper and lower stretchers. Extruded aluminum router table fence with fully adjustable fence faces. Optional digital readout attachment and pow-r-tek remote power switch not included. 32″ x 24″ phenolic table with aluminum extruded miter track & t-track. Includes jessem mast-r-lift excel ii for most cylinder router motors.

 

JessEm Mast-R-Lift II 02121 Router Lift 8-14-Inch by 11-34-Inch by JessEm Tool Company

JessEm Mast-R-Lift II 02121 Router Lift, 8-1/4-Inch by 11-3/4-Inch by JessEm Tool Company

JessEm Mast-R-Lift II 02121 Router Lift, 8-1/4-Inch by 11-3/4-Inch by JessEm Tool Company - Exclusive cam locking systemdouble sealed bearing constructionbit changes above the table for all routersmachined from 3/8-inch solid aluminum and hard anodized for durabilityfits most fixed base routers on the market today.

 

JessEm Rout-R-Lift II Router Lift For 3-12 Diameter Motors JessEm 02310 by JessEm

JessEm Rout-R-Lift II Router Lift For 3-1/2 Diameter Motors, JessEm# 02310 by JessEm

JessEm Rout-R-Lift II Router Lift For 3-1/2 Diameter Motors, JessEm# 02310 by JessEm - Jessem rout-r-lift ii router lift for 3-1/2 diameter motors, jessem# 02310. Micro adjust thumb wheel eliminates the need for a crank handle. Includes 3 self-leveling, twist lock insert rings 1-inch, 2-5/8-inch and a step ring. Adjustable reference scale can be set to zero from any bit position. Lift mounted to heavy gauge aluminum insert plate.

 

Woodtek 966049 Portable Power Tool Accessories Routers Trimmers Router Lift 24x16 Ci Table 24 Fence

Woodtek 966049, Portable Power Tool Accessories, Routers & Trimmers, Router Lift, 24″x16″ Ci Table, 24″ Fence

Woodtek 966049, Portable Power Tool Accessories, Routers & Trimmers, Router Lift, 24″x16″ Ci Table, 24″ Fence - 42- to 35-inch range. Professional grade. Set consisting of 1 woodtek deluxe router lift 1 small cast iron router table 27″ x 16″ 1 fence ass’y for 27″ x 16″ cast iron router table. 2-year limited warranty. Enables round router motors that are 35 inches in diameter to be used with prolift ni router lift.

 

JessEm Mast-R-Lift II 02121 Router Lift 8-14-Inch by 11-34-Inch

JessEm Mast-R-Lift II 02121 Router Lift, 8-1/4-Inch by 11-3/4-Inch

JessEm Mast-R-Lift II 02121 Router Lift, 8-1/4-Inch by 11-3/4-Inch - Our lifts and plates all feature our tab-loctm design insert rings which are another jessem innovation that is common on many other manufacturers’ products today. This removed any vibration from the thread clearance and also prevented the spindle from moving and changing your setting while routing. The hard anodizing process used on the plate is several times more expensive then but we want your lift to provide many years of service. Now we have developed the ultimate lift with features, built in accuracy and ease of use that we would want ourselves. Adjusting a router in a table mounted operation was very difficult to do accurately before the first router lift in 1999. We figure we must be doing something right if our competition follows our lead. All of jessem’s lifts have the patented feature of adding tension to the threaded spindle to remove any backlash while adding some resistance to the rotation of the thread. Hard anodizing is an engineered surface treatment that provides a thick abrasion resistant coating and is not just a cosmetic treatment that will wear off. The shafts on the mast-r-lift ii like all our router lifts are pressed into a shaft mount with hydraulic pressure what you get the mast-r-lift ii comes with a 2″ insert ring to reduce the size of the bit opening in the plate and the opening is large enough to accommodate a 3-1/2″ diameter bit without an insert installed. The mast-r-lift ii is a precision piece of engineering that you will be proud to own and find use whenever you are in your work shop. We invented the lift because we too are woodworkers.

 

Excalibur 40-312 Router Lift Reducer Collar For 3-12 Inch Router MotorsSold By 2 Pack by Excalibur

Excalibur 40-312 Router Lift Reducer Collar For 3-1/2 Inch Router Motors(Sold By 2 Pack) by Excalibur

Excalibur 40-312 Router Lift Reducer Collar For 3-1/2 Inch Router Motors(Sold By 2 Pack) by Excalibur - Professional grade. 2-year limited warranty. Excalibur 40-312 router lift reducer collar for 3-1/2 inch router motors(sold by 2 pack). Enables round router motors that are 35 inches in diameter to be used with prolift ni router lift. 42- to 35-inch range.

 

Pro Phenolic Router Table Fence Stand FX Router Lift

Pro Phenolic Router Table, Fence, Stand, & FX Router Lift

Pro Phenolic Router Table, Fence, Stand, & FX Router Lift - Aluminum fence backer features front- and rear-mounted universal t-tracks that accept 5/16″ t-bolts, 1/4″ t-bolts, and 1/4″ hex bolts. Our brand-new pro tables feature one-piece 3/4″ solid phenolic construction for an ultra-flat, low-friction surface that won’t warp, dent, scratch or delaminate, and the whiter, brighter finish enhances visibility. Large opening in fence for big router bits. Ergonomic t-knobs for easy fence adjustment. Router lift fx includes insert ring with 1-1/2″ opening. 24″ x 32″ table. Includes rockler pro fence with extruded aluminum backer for straight, accurate cuts. D. These packages include our steel stand and the acclaimed router lift fx for effortless above-table adjustments and bit changes. 24″ x 32″ table for over five square feet of surface area. Fence features a 2-1/2″ o. 3/4″ t-profile miter slot allows you to use precision aftermarket miter gauges, while universal t-tracks in both the fence and table accept stops, hold-downs and more. The router lift fx accepts the following routers porter-cable 690/890 series, bosch 1617-16-18, dewalt 610, 616, 618. Includes bit safety guard for safe routing. 8-1/4″ x 11-3/4″ x 1/4″ aluminum plate. Includes our acclaimed rockler router lift fx for above-table bit height adjustments and bit changes. 10-point plate leveling/locking system. D. Included aluminum pro fence features two adjustable white melamine mdf faces, front- and rear-facing accessory t-tracks and an included dust port and bit guard. Featuring 8-points of plate leveling and 2 locking points. (2-1/4″ i. ) Dust port. Includes new, larger steel stand, which measures 18″d x 24″w x 32″h.

 

MLCS 9563 U-Turn Router Lift for 3-14 HP Routers Fits MLCS Tables

MLCS 9563 U-Turn Router Lift for 3-1/4 HP Routers Fits MLCS Tables

MLCS 9563 U-Turn Router Lift for 3-1/4 HP Routers Fits MLCS Tables - Built to handle the big 42″ diameter, 3-1/4 hp routers with ease. With over three inches of travel, router bit changes can be made from above the table. Heavy duty built to last. The 18-1/2″ height adjustment handle lets you keep your work on the table and adjust the router from the side. Sealed ball bearings, brass fittings, heavy duty guide posts.

 

JESSEM Mast-R-Lift Excel II Router Table Top With Integral Router Lift JessEm 02202

JESSEM Mast-R-Lift Excel II Router Table Top With Integral Router Lift, JessEm# 02202

JESSEM Mast-R-Lift Excel II Router Table Top With Integral Router Lift, JessEm# 02202 - 24″ x 32″ x 3/4″ solid phenolic top with built-in router lift mechanism. Extruded aluminum 3/4″ miter track with accessory t-slot, 4″ dust port. Remote crank handle with dedicated cam-lock mechanism to prevent spindle rotation. Unique router clamping system fits most fixed-base router motors. Optional digital readout attachment not included.

 

JessEm Mast-R-Lift II 02120 Router Lift 9-14-Inch by 11-34-Inch by JessEm Tool Company

JessEm Mast-R-Lift II 02120 Router Lift, 9-1/4-Inch by 11-3/4-Inch by JessEm Tool Company

JessEm Mast-R-Lift II 02120 Router Lift, 9-1/4-Inch by 11-3/4-Inch by JessEm Tool Company - Exclusive cam locking systemdouble sealed bearing constructionbit changes above the table for all routersmachined from 3/8-inch solid aluminum and hard anodized for durabilityfits most fixed base routers on the market today.

 

JessEm Rout-R-Lift II Router Lift For 3-12 Diameter Motors JessEm 02310 by JessEm

JessEm Rout-R-Lift II Router Lift For 3-1/2 Diameter Motors, JessEm# 02310 by JessEm

JessEm Rout-R-Lift II Router Lift For 3-1/2 Diameter Motors, JessEm# 02310 by JessEm - Combination miter and t-slot. Easy-slide micro-dot surface. Jessem rout-r-lift ii router lift for 3-1/2 diameter motors, jessem# 02310. Dual steel support struts and heavy-duty construction support the largest routers and lifts. Phenolic insert plate and dual reducing rings.

 

Woodtek 165569 Portable Power Tool Accessories Routers Trimmers 3-12 Id X 4 2 Od Adapter FWoodtek Router Lift

Woodtek 165569, Portable Power Tool Accessories, Routers & Trimmers, 3-1/2″ Id X 4. 2″ Od Adapter F/Woodtek Router Lift

Woodtek 165569, Portable Power Tool Accessories, Routers & Trimmers, 3-1/2″ Id X 4. 2″ Od Adapter F/Woodtek Router Lift - Jessem rout-r-lift ii router lift for 3-1/2 diameter motors, jessem# 02310. Each ring is molded of abs reinforced with polycarbonate. Router table insert ring set, 97mm od, fits sears craftsman & ryobi, set of 3#0035/13. Set includes solid, 3/4-inch, 7/8-inch, 1-3/8-inch, 1-5/8-inch, 1-7/8-inch, 2-1/8-inch, and 2-3/8-inch. This set of eight is in addition to the standard three rings supplied with each woodpeckers router mounting plate and router lift. For ideal stock support, it’s recommended that the router bit opening be approximately 1/8″ to -1/4″ larger than the bit diameter. Enables use of three-and-one-half-inch router motors.

 

Bench Dog Cast Iron Router Table Pro Router Lift Pro Fence Steel Cabinet

Bench Dog Cast Iron Router Table, Pro Router Lift, Pro Fence, & Steel Cabinet

Bench Dog Cast Iron Router Table, Pro Router Lift, Pro Fence, & Steel Cabinet - Two integral casters allow you to tip and roll the entire router table. Add to that the included steel cabinet with it’s unique internal dust bucket, and you have something that looks more like an industrial shaper than a router table. Prolift is compatible with porter-cable 7518 & 7519 adapters for other routers available separately. The end result a long working life of incredibly smooth operation. If you’re after the ultimate table top, the pinnacle of size, stability, and durability, look no further than the promax rt. Plus, it’s loaded with features dual t-tracks in the table a standard miter slot and a universal t-track for accessories. Weighing in at nearly 100 pounds, it’s built from one solid piece of 1-1/2″ thick cast iron to absorb vibration better than any table on the market. Weighing in at nearly 100 lbs, the one-piece top provides more than 5 square feet of ultra-flat work surface. Plus, you get the 32″ profence, a precision-milled aluminum fence with two mdf sub-fences, front and rear t-tracks, a 2-1/2″ dust port and an integrated bit guard. . Cabinet includes integrated dust bucket for superior dust collection. Universal t-tracks accept 1/4″ and 5/16″ t-bolts as well as 1/4″ hex bolts-perfect for hold-downs, stops, featherboards and more. Enclosed steel cabinet is built of solid galvanized steel. Meet the ultimate router table, complete with a fence, plate, steel cabinet, and a router lift at 24″ x 32″ x 1-1/2″, the bench dog cast-iron router table is the largest, flattest, and most durable option on the market. Its 12-point plate-leveling/locking system guarantees a secure, flush interface with the included bench dog prolift router lift. 32″ pro fence is precision machined for flatness and squareness, and includes front- and rear-mounted universal accessory t-tracks. Cast iron table top measures 24″ x 32″ x 1-1/2″, over 5 square feet of surface area.

 

st-R-Lift Excel II Router Table Top With Integral Router Lift JessEm 02202

st-R-Lift Excel II Router Table Top With Integral Router Lift, JessEm# 02202

st-R-Lift Excel II Router Table Top With Integral Router Lift, JessEm# 02202 - New rtl router table lift provides easy and unobstructed access to router adjustments. Fits virtually any router and standard router top. Woodpeckers precision woodworking tools prl-v2-420 precision router lift. Unique router clamping system fits most fixed-base router motors. Lower cost.

 

Woodtek 166943 Portable Power Tool Accessories Routers Trimmers 4 Pc Twist Lock Insert Ring Set FWdtk Router Lift

Woodtek 166943, Portable Power Tool Accessories, Routers & Trimmers, 4 Pc Twist Lock Insert Ring Set F/Wdtk Router Lift

Woodtek 166943, Portable Power Tool Accessories, Routers & Trimmers, 4 Pc Twist Lock Insert Ring Set F/Wdtk Router Lift - Made to fit woodtek® deluxe router lift 165-545. Opening sizes 1/4″, 1/2″, 1-1/2″, and 2-1/2″. It’s recommended that the bit opening be approximately 1/8″ to 1/4″ larger than the diameter of the router bit. Outside diameter 3. Helps maintain proper clearance for safer and improved routing. Woodtek® 4 piece twist lock insert ring set molded from polycarbonate abs provides stock support while routing as well as clearance for good airflow. 86″ (98mm) insert openings can be machined to other diameters. Imported. Molded from a polycarbonate reinforced abs.

 

MLCS 9562 U-Turn 2 Router Lift for 3-14 HP Routers

MLCS 9562 U-Turn 2 Router Lift for 3-1/4 HP Routers

MLCS 9562 U-Turn 2 Router Lift for 3-1/4 HP Routers - Sealed ball bearings, brass fittings, heavy duty guide posts. With over three inches of travel, router bit changes can be made from above the table. Built to handle the big 42″ diameter, 3-1/4 hp routers with ease. The 18-1/2″ height adjustment handle lets you keep your work on the table and adjust the router from the side. Heavy duty built to last.

 

Woodtek 165566 Portable Power Tool Accessories Routers Trimmers 3-14 id X 4 2od Adapter For Woodtek Router Lift

Woodtek 165566, Portable Power Tool Accessories, Routers & Trimmers, 3-1/4 “id X 4. 2″od Adapter For Woodtek Router Lift

Woodtek 165566, Portable Power Tool Accessories, Routers & Trimmers, 3-1/4 “id X 4. 2″od Adapter For Woodtek Router Lift - Enables round router motors that are 35 inches in diameter to be used with prolift ni router lift. Enables use of three-and-one-quarter-inch router motors. 42- to 35-inch range. Set consisting of 1 woodtek deluxe router lift 1 small cast iron router table 27″ x 16″ 1 fence ass’y for 27″ x 16″ cast iron router table. 2-year limited warranty.

 

Rousseau 3509-T Installation Template for Deluxe Router Base Plate Model 3509 and Router Lift LS Models 3002 3003 3004

Rousseau 3509-T Installation Template for Deluxe Router Base Plate Model 3509 and Router Lift LS Models 3002, 3003, 3004

Rousseau 3509-T Installation Template for Deluxe Router Base Plate Model 3509 and Router Lift LS Models 3002, 3003, 3004 - Includes double stick tape to secure template for routing & custom template guides to cut thru hole & rabbet.

 

Woodtek 167690 Portable Power Tool Accessories Routers Trimmers Wrench For Router Lift Insert Rings

Woodtek 167690, Portable Power Tool Accessories, Routers & Trimmers, Wrench For Router Lift Insert Rings

Woodtek 167690, Portable Power Tool Accessories, Routers & Trimmers, Wrench For Router Lift Insert Rings - 002″. Rated “best overall” by fine woodworking magazine. Shipping weight 19. Tool-less scale adjustments can be set to zero from any bit position then incremented to intervals as small as. Lift is designed for large 4″ diameter routers. The massive lift mechanism, which comprises four threaded posts connected by a chain and sprocket, is precise with little to no backlash. The woodtek® deluxe router lift is rock-solid with a 9-1/4″ x 11-3/4″ clear anodized 1/4″ thick aluminum top plate. Net weight 15. 4 lbs. Optional 3-1/4″ collar adapter 165-566 and 3-1/2″ collar adapter 165-569 are available to fit smaller diameter router motors. Smooth above-the-table adjustment mechanism for fast tool changes and precision bit setting. Will fit other router table tops with an 11-3/4″ x 9-1/4″ opening and 3/4″ radius corners four post raising mechanism guarantees router motor and router bit stays perfectly square. Imported. Includes height adjustments handle, (1) 3-3/4″ diameter ring insert with 1-1/2″ opening, insert spanner wrench, starter pin. 8 lbs. Insert ring twists and locks into place with a spanner wrench. Made to fit woodtek® 32″ x 24″ cast iron table 165-548 and woodtek® 27″ x 16″ cast iron table 165-557.

 

Bench Dog Tools 40-150 ProLift Router Adjustment System

Bench Dog Tools 40-150 ProLift Router Adjustment System

Bench Dog Tools 40-150 ProLift Router Adjustment System - Bronze pre-load nut prevents back driving due to vibration this exclusive design eliminates the constant adjustment required on other lifts. Twin ball bearings support the weight of the router most other lifts use cheap sleeves. Use 40-002 prolift adapter for bosch 1617/1618, dewalt 610,616/618 and porter cable 690/890 routers use 40-003 adapter for makita rf1100/1101 adapters sold separately. Direct drive lead screw is fast-acting and self-cleaning won’t get sloppy over time like belts, chains and gears. Ultra-flat cast iron plate is precision-ground and measures 8-1/4-inch by 11-3/4-inch fits all bench dog router tables various size plastic insert rings are sold separately (1 included).





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.