25 Best Lathe Chucks

 

Lathe Chuck 3-Jaw 4 with Adapter

Lathe Chuck, 3-Jaw 4″ with Adapter

Lathe Chuck, 3-Jaw 4″ with Adapter - 87″ (22 mm) through hole. 15″ (80 mm) in diameter and comes with an adapter for the mini lathe so that you can bolt it on in place of a 3″ (80 mm) chuck. This chuck has a 0. 003″ maximum. The radial runout of a test bar held in this chuck, when the chuck is mounted true, is 0. 4 inch, 3-jaw self-centering lathe chuck with adapter for the mini lathe. Includes chuck key, inside and outside jaws, and mounting bolts. The chuck can hold work up to 3.

 

PSI CMG3C Mini Grip 4 Jaw Wood Lathe Chuck System

PSI CMG3C Mini Grip 4 Jaw Wood Lathe Chuck System

PSI CMG3C Mini Grip 4 Jaw Wood Lathe Chuck System - Basic straight jaws for 1-inch stock, square or round. Stepped jaws for small dowels 3/8-to-1-1/4-inch to grip internally 1-to-2-1/2-inch. Flat jaws to handle bowls up to 5-inch diameter are available (#cjawfj1). Bonus jaws to hold dowels 1-1/2-to-2-3/8-inch to grip internally 2-to-3-inch. Adapts to both 3/4-inch-by-16 tpi and 1-by-8 tpi spindles, and contains 2 open/close levers.

 

PSI Woodworking BARR6JAW 6 Jaw Heavy Duty Self-Centering Lathe Chuck System

PSI Woodworking BARR6JAW 6 Jaw Heavy Duty Self-Centering Lathe Chuck System

PSI Woodworking BARR6JAW 6 Jaw Heavy Duty Self-Centering Lathe Chuck System - Includes (6) #2 round dovetail jaws & screw chuck. Opens and closes with included levers 3mm hex wrench also included. Outside grip is 2-1/2″ to 3-1/4″ inside grip is 2″ x 2-3/4″. Threaded to 1-1/4″ x 8tpi includes 1″ x 8tpi spindle adapter. Grabs more surface area of a larger diameter turning base than 4-jaw chucks.

 

PSI CSC2000C Barracuda Wood Lathe Chuck System

PSI CSC2000C Barracuda Wood Lathe Chuck System

PSI CSC2000C Barracuda Wood Lathe Chuck System - Includes #2 round jaws, for dowels1-1/2″ to 2-7/8″, holes 2″ to 3-1/2″. Includes pin jaws which hold inside holes 1″, 2-1/2″, and a screw chuck. Includes #1 step jaws- for dowels 1/32″ to 1-1/2″, holes 11/16″to 3-1/8″. Includes four(4) self-centering jaw sets to hold round and square stock for turning, pre-threaded for 1″ x 8 tpi, and has an adapter for 3/4″ x 16 tpi spindles. Includes #3 round jaws, external grip 3-1/16″, 4-1/2″.

 

Lathe Chuck 3-Jaw 5

Lathe Chuck, 3-Jaw 5″

Lathe Chuck, 3-Jaw 5″ - 003″ maximum. 5 inch, 3-jaw self-centering lathe chuck. 33″) in diameter. The chuck can hold work up to 110 mm (4. Includes chuck key, inside and outside jaws, and mounting bolts. The radial runout of a test bar held in this chuck, when the chuck is mounted true, is 0.

 

HHIP 3900-4865 14 Square Head Standard Lathe Chuck Wrench

HHIP 3900-4865 1/4″ Square Head Standard Lathe Chuck Wrench

HHIP 3900-4865 1/4″ Square Head Standard Lathe Chuck Wrench - For use on lathe chucks. Hhip 1/4″ square head standard lathe chuck wrench is made of high quality tool steel. .

 

HHIP 3900-4706 MT2 Shank 3 3-Jaw Lathe Chuck with Threaded Drawbar End 38 - 16 Thread

HHIP 3900-4706 MT2 Shank 3″ 3-Jaw Lathe Chuck with Threaded Drawbar End, 3/8 – 16 Thread

HHIP 3900-4706 MT2 Shank 3″ 3-Jaw Lathe Chuck with Threaded Drawbar End, 3/8 – 16 Thread - 3″ 3-jaw lathe chuck with mt2 shank ~ threaded drawbar end 3/8-16 ~ steel body-hardened and ground scroll and pinions. ~ Hardened and ground mt spindle. ~ includes 2 sets of solid steel jaws, both internal and external. ~ Supplied with chuck wrench.

 

South Bend Lathe SB1370 12-Inch by JT33 Drill Chuck

South Bend Lathe SB1370 1/2-Inch by JT33 Drill Chuck

South Bend Lathe SB1370 1/2-Inch by JT33 Drill Chuck - Durable finish gives years of life to the surfaces. Accurate enough for your lathe or mill. Produced to close tolerances.

 

Lathe Chuck 3-Jaw 3

Lathe Chuck, 3-Jaw 3″

Lathe Chuck, 3-Jaw 3″ - The radial runout of a test bar held in this chuck, when the chuck is mounted true, is 0. This chuck has a 0. 003″ maximum. It holds work up to 2. 63″ (16 mm) through hole. This 3 inch 3-jaw self-centering lathe chuck is the one that comes on the mini lathe. It includes a chuck key, inside and outside jaws, and mounting bolts. 48″ (63 mm) in diameter.

 

NOVA 48202 G3 WOODLATHE CHUCK WITH 2 JAWS WOODWORM SCREW ISNS SHOPSMITH INSERT

NOVA 48202 G3 WOODLATHE CHUCK WITH 2″ JAWS, WOODWORM SCREW, & ISNS SHOPSMITH INSERT

NOVA 48202 G3 WOODLATHE CHUCK WITH 2″ JAWS, WOODWORM SCREW, & ISNS SHOPSMITH INSERT - . Recommended for turning bowls up to 12″ in diameter with the included 2″ (50mm) dovetail jaw set. The latest addition to the nova chuck line. Comes with a 2″ dovetail jaw set, heavy duty woodworm screw for starting your bowls, and the threaded insert to fit your lathe. Fitting nicely in between the nova midi chuck and the supernova 2 chuck, the g3 is an economical option featuring the fast one handed operation of the keyed articulation at price that is more affordable than anything of this quality and with this many features on the market. Yes, it also accepts all other nova and super nova accessories, and is ideal for mini, midi, and other lathes up to 14″ swing over bed.

 

HHIP 3900-4855 12 Square Head Self-Ejecting Lathe Chuck Wrench

HHIP 3900-4855 1/2″ Square Head Self-Ejecting Lathe Chuck Wrench

HHIP 3900-4855 1/2″ Square Head Self-Ejecting Lathe Chuck Wrench - 1/2″ square head self-ejecting lathe chuck wrench ~ made of high quality tool steel. . ~ For use on lathe chucks.

 

OMEX New Rotary Table Tilting 3  75mm with 65mm Lathe Chuck for Milling Machine Set

OMEX New Rotary Table Tilting 3″ / 75mm with 65mm Lathe Chuck for Milling Machine Set

OMEX New Rotary Table Tilting 3″ / 75mm with 65mm Lathe Chuck for Milling Machine Set - 1 3″ rotary table tilting 2 65mm, 3 jaw self centering lathe chuck with key 3 adapter fitted in rotary table. Tilting rotary table 3″ / 75mm, horizontal & vertical with 65mm, 3 jaw self centering lathe chuck. New & box packed. New & packed rotary table with 65mm chuck. Chuck back thread 14x1mm.

 

TTC Lathe Chuck Safety Wrench - Size  12

TTC Lathe Chuck Safety Wrench – Size : 1/2″

TTC Lathe Chuck Safety Wrench – Size : 1/2″ - Overall length 8-1/16″. Heavy duty construction. Prevents damage to your expensive machines. Self-ejecting. Hardened and tempered.

 

LCK-4375 716 Square Lathe Chuck Key

LCK-4375 7/16″ Square Lathe Chuck Key

LCK-4375 7/16″ Square Lathe Chuck Key - Square end 4375″. Plain key (no ejecting spring).

 

USST KT-10200P Steel Soft Chuck Jaws for 10 CNC Lathe Chucks 2 Tall Set of 3 Pieces

USST KT-10200P Steel Soft Chuck Jaws for 10″ CNC Lathe Chucks, 2″ Tall (Set of 3 Pieces)

USST KT-10200P Steel Soft Chuck Jaws for 10″ CNC Lathe Chucks, 2″ Tall (Set of 3 Pieces) - If jaws are taller than standard height for your chuck, there is a loss of grip force, reduce rpm during all operations check your chuck manual to figure standards for your chuck and grip force diagrams. Supplies maximum concentricity on finish turning operations. 15mm x 60 degree serrations. 2 holes. Steel (1050), can be hardened.

 

Threaded Backplate Adapter 5 3-Hole D1-3 For Lathe Chucks

Threaded Backplate Adapter 5″ 3-Hole D1-3 For Lathe Chucks

Threaded Backplate Adapter 5″ 3-Hole D1-3 For Lathe Chucks - Threaded backplate adapter 5″ diameter, 3-hole with d1-3 mount. High grade casting iron. Our part # all-47910. Fits most plain back chucks.

 

Lathe Chuck 4-Jaw 6

Lathe Chuck, 4-Jaw 6″

Lathe Chuck, 4-Jaw 6″ - This is a plain back chuck and requires a backplate adapter to mount it. This chuck has a 1. 77″ (45 mm) through hole. The chuck can hold work up to 6. 30″ (160 mm) in diameter. Each jaw is independently adjustable and reversible. 6 inch, 4-jaw independent lathe chuck.

 

HHIP 3900-0423 4-Jaw Self-Centering Lathe Chuck Plain 3 Mounting Holes 3

HHIP 3900-0423 4-Jaw Self-Centering Lathe Chuck Plain 3 Mounting Holes, 3″

HHIP 3900-0423 4-Jaw Self-Centering Lathe Chuck Plain 3 Mounting Holes, 3″ - 3″ 4-jaw self-centering lathe chuck (plain) 3 mounting holes made of high quality semi-steel. Universal scroll chucks. 2 sets of solid jaws included (id &od). . Chuck wrench included.

 

HHIP 3900-4867 38 Square Head Standard Lathe Chuck Wrench

HHIP 3900-4867 3/8″ Square Head Standard Lathe Chuck Wrench

HHIP 3900-4867 3/8″ Square Head Standard Lathe Chuck Wrench - 3/8″ square head standard lathe chuck wrench ~ made of high quality tool steel. . ~ For use on lathe chucks.

 

Shop Fox D4103 Mini Lathe Chuck with Arbors

Shop Fox D4103 Mini Lathe Chuck with Arbors

Shop Fox D4103 Mini Lathe Chuck with Arbors - Includes mt no. 1 and mt no. 2 arbors and wrenches. This 2-inch diameter 3-jaw mini lathe chuck is a self-centering scroll type chuck with reversible jaws.

 

ZJchao ER20 Precision SPRING COLLET set 13 pcs 1mm-13mm CNC MILLING LATHE CHUCK TOOL

ZJchao ER20 Precision SPRING COLLET set 13 pcs (1mm-13mm) CNC MILLING LATHE CHUCK TOOL

ZJchao ER20 Precision SPRING COLLET set 13 pcs (1mm-13mm) CNC MILLING LATHE CHUCK TOOL - Package include er20 precision spring collet set 13 pcs(1mm-13mm) (includes 1mm,2mm,3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm,11mm,12mm,13mm).

 

PSI Woodworking CJAWPEN Pen Blank Drilling Jaws For C Series PSI Lathe Chucks

PSI Woodworking CJAWPEN Pen Blank Drilling Jaws For “C” Series PSI Lathe Chucks

PSI Woodworking CJAWPEN Pen Blank Drilling Jaws For “C” Series PSI Lathe Chucks - . Do you already own a “c” series psi lathe chuck if so then these jaws will easily convert your psi lathe chuck to a pen blank drilling fixture. These 2″ long accessory jaws adapt to all psi “c” series chucks #csc2000c, #csc3000c, #csc3000ctn, #cmg3c and #cug3418c styles.

 

PSI Woodworking CSC500K Barracuda Micro Key Lathe Chuck System

PSI Woodworking CSC500K Barracuda Micro Key Lathe Chuck System

PSI Woodworking CSC500K Barracuda Micro Key Lathe Chuck System - Holds dowell from 1/4-inch up to 1-1/2-inch outside diameter. Weighs only 12 pounds with a 2-1/8-inch outside diameter. Mounts to 3/4-inch-by-16 tpi & also adapts to 1-inch-by-8 tpi. Includes step jaws, round jaws, and pin jaws. Holds workpiece from 5/8-to-2-inch inside hole diameter.

 

5 5 inch 3 Jaw Precision Self Centering Lathe Chuck with 2 sets jaw

5″ (5 inch) 3 Jaw Precision Self Centering Lathe Chuck with 2 sets jaw

5″ (5 inch) 3 Jaw Precision Self Centering Lathe Chuck with 2 sets jaw - 4961″ (38mm), 4. Internal jaw jamming range 1. 5mm) -1. Internal jaw clamping range 0. 5748″ (40mm). Accuracy 0. 9213″ (125mm). 4961″ (38mm), 4. 3307″ (110mm). Superior gripping force to meet precision machining demands. External jaw clamping range 1. High precision self-centering design. Flimsy parts are specifically engineered by quenching process to enhance durability. 002″(tested vertical. 0984″ (2.

 

PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System

PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System

PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System - Includes four (4) self-centering jaw sets to hold round and square stock for turning, pre-threaded for 1x8tpi, and has an adapter for 3/4x16tpi spindles. Includes pin jaws which hold inside holes 1-to-2-1/4-inch, and a screw chuck. Includes #2 round jaws, for dowels 7/8-to-1-1/2-inch holes 1-1/4-to-2-inch. Includes #3 round jaws, external grip 3-1/16-to-4-3/8-inch. Includes #1 step jaws for dowels 3/32-to-1-3/8-inch, holes 11/16-to-2-3/8-inch.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.