Best 16 4 Jaw Chucks

 

34 x 16 TPI Self-Centering 4-Jaw Chuck

3/4 x 16 TPI Self-Centering 4-Jaw Chuck

3/4 x 16 TPI Self-Centering 4-Jaw Chuck - Chuck body is chrome-plated to protect against corrosion while the jaws are anodized black. Jaws will expand and grip in a 2-3″ dovetailed recess in the base of your turning. Expand the versatility of your lathe and mount your workpieces quicker and easier with the self-centering 4-jaw chuck. Comes complete with screw center, locking levers, t-handled hex wrench for jaw screws and 8 extra jaw screws. Everything is secure in a fitted plastic storage/carrying case. Simply rotate the chuck’s outer ring in the opposite direction to firmly hold round stock between 1-5/8″ and 2-3/4″ or square billets 1-1/8″ to 2-1/8″ in size. No disassembly or accessories are required to use the accompanying screw chuck, which has a 1-1/8″ long right hand thread. You’ll appreciate the following features wide range of jaw movement, quick action and a powerful grip in either expansion or contraction modes.

 

1 x 8 TPI Self-Centering 4-Jaw Chuck

1″ x 8 TPI Self-Centering 4-Jaw Chuck

1″ x 8 TPI Self-Centering 4-Jaw Chuck - The savannah self-centering 4 jaw woodturning chuck has a large range of jaw adjustability. The chuck comes with a screw chuck that does not require any accessories or disassembly to use. The chuck body is chrome plated and the jaws are black anodized to protect against corrosion. The powerful jaws will grip and expand in a 2″ to 3″ dovetail recess in the base of your project. To adjust the quick action on the chuck simply insert the locking levers into the chuck and rotate them in opposite direction to grip in the contraction mode or expansion mode.

 

4 Way Woodturning Chuck Complete System with 3 and Pin Jaws 1 34 x 16 tpi adapter size

4 Way Woodturning Chuck Complete System with #3 and Pin Jaws ((1) 3/4″ x 16 tpi adapter size)

4 Way Woodturning Chuck Complete System with #3 and Pin Jaws ((1) 3/4″ x 16 tpi adapter size) - The jaws expand and grip in a 2″ to 3″ dovetail recess. It has a wide range of jaw movement and a powerful grip for most any type of turing project. The 4 way chuck is chrome plated to protect against corrosion while jaws are anodized black. The 4 jaw chuck is an economical and quality choice for woodturners of any skill level. . The supplied standard jaws hold round stock between 1-5/8″ to 2-3/4″ or square billets 1-1/8″ to 2-1/8″ in size. Includes 4 jaw chuck, standard jaws, t-handle wrench, screw center, threaded adapter (choice of size for your lathe), 2 each locking levers, 8 each jaw mounting screws, #3 chuck jaws (for stock 3-1/4″ to 4-1/4″) and pin jaws ( for stock from 3/8″ to 1-3/8″).

 

4 Jaw Lathe Chuck with Case

4 Jaw Lathe Chuck with Case

4 Jaw Lathe Chuck with Case - Fitted plastic storage/carrying case. Quick action and a powerful grip in either expansion or contraction modes. Jaws will expand and grip in a 2-3″ dovetailed recess in the base of your turning. Large flat jaws make it easy to finish the bottom of plates and bowls. Wide range of jaw movement.

 

Grizzly H8048 6-Inch 4-Jaw Chuck 34-Inch by 16 TPI

Grizzly H8048 6-Inch 4-Jaw Chuck, 3/4-Inch by 16 TPI

Grizzly H8048 6-Inch 4-Jaw Chuck, 3/4-Inch by 16 TPI - Independent jaws. Independently adjustable jaws hold odd shaped work. Jaws can be reversed for different holding applications. Specifications size 3/4″ tpi 16.

 

Grizzly T10053 3-14-Inch 4-Jaw Chuck for 4-Inch Rotary Table

Grizzly T10053 3-1/4-Inch 4-Jaw Chuck for 4-Inch Rotary Table

Grizzly T10053 3-1/4-Inch 4-Jaw Chuck for 4-Inch Rotary Table - . 4- 5/16″ t-slots. Coolant trough. 172 ratio or 5degree per revolution. Vernier scale reads to 10 seconds. Sector arms. Horizontal or vertical use. Mt #1 spindle bore. Indexing pin/handle. 10mm locating keys. 3 dividing plates.

 

Grizzly H7605 4 Jaw Chuck 3-Inch

Grizzly H7605 4 Jaw Chuck, 3-Inch

Grizzly H7605 4 Jaw Chuck, 3-Inch - Setup is quick and easy by twisting the knurled adjustment plate on the back of the chuck. Two 4-inch wrenches are included for final tightening. This self-centering style 4-jaw chuck has reversible stepped jaws for holding a variety of round or square work piece sizes. Fits all wood lathes with 1-inch x 8 tpi spindles.

 

1 x 8 TPI Self-Centering 4-Jaw Chuck

1″ x 8 TPI Self-Centering 4-Jaw Chuck

1″ x 8 TPI Self-Centering 4-Jaw Chuck - Simply rotate the chuck’s outer ring in the opposite direction to firmly hold round stock between 1-5/8″ and 2-3/4″ or square billets 1-1/8″ to 2-1/8″ in size. You’ll appreciate the following features wide range of jaw movement, quick action and a powerful grip in either expansion or contraction modes. Comes complete with screw center, locking levers, t-handled hex wrench for jaw screws and 8 extra jaw screws. Expand the versatility of your lathe and mount your workpieces quicker and easier with the self-centering 4-jaw chuck. Everything is secure in a fitted plastic storage/carrying case. Chuck body is chrome-plated to protect against corrosion while the jaws are anodized black. No disassembly or accessories are required to use the accompanying screw chuck, which has a 1-1/8″ long right hand thread. Jaws will expand and grip in a 2-3″ dovetailed recess in the base of your turning. .

 

Woodstock D4054 3-Inch 4 Jaw Chuck 1-Inch by 8 TPI

Woodstock D4054 3-Inch 4 Jaw Chuck 1-Inch by 8 TPI

Woodstock D4054 3-Inch 4 Jaw Chuck 1-Inch by 8 TPI - Two 4-inch wrenches are included for final tightening. Fits all wood lathes with 1-inch by 8 tpi spindles. Self-centering.

 

Hurricane Turning Tools HTC100 4-Inch Woodturning 4 Jaw Chuck Kit with Dovetail Jaws for Wood Lathes with 1 14 x 8-Inch TPI Spindles

Hurricane Turning Tools HTC100 4-Inch Woodturning 4 Jaw Chuck Kit with Dovetail Jaws for Wood Lathes with 1 1/4 x 8-Inch TPI Spindles

Hurricane Turning Tools HTC100 4-Inch Woodturning 4 Jaw Chuck Kit with Dovetail Jaws for Wood Lathes with 1 1/4 x 8-Inch TPI Spindles - If you are looking for a massive chuck for medium to super large bowls, check out the htc125 5″ chuck in our amazon store. We would like to introduce you to the hurricane htc100 100mm 4 jaw self centering woodturning chuck. Many optional jaw sets are available (sold separately) for various woodturning applications. It is perfect if you only want one chuck and you switch between a mini lathe and a full size lathe. It is a great size for full-size / midi and mini lathes. Available in several spindle threads to suit almost all lathes. It provides a superb grip on your woodturning projects such as bowls and platters. This is a 4″ chuck which compares in size to the oneway talon, novatech, etc chucks. Please note that this chuck is the smaller in size of the two hurricane chucks. This is an outstanding quality chuck that compares to some of the “famous names” on the market.

 

Lathe Chuck 4-Jaw 4 with Adapter

Lathe Chuck, 4-Jaw 4″ with Adapter

Lathe Chuck, 4-Jaw 4″ with Adapter - 94″ (100 mm) in diameter. This chuck has a 0. 98″ (25 mm) through hole. The adapter mounts to the spindle with three studs so additional holes in the spindle are not required. The chuck can hold work up to 3. This 4 inch 4-jaw independent chuck includes an adapter to fit the mini lathe spindle. It includes a chuck key and reversible jaws.

 

SANOU 4 Jaw Self-centering Chuck K12-80 3 inch 4 jaws Chuck Machine Tool Lathe Chuck

SANOU 4 Jaw Self-centering Chuck K12-80 3″ inch 4 jaws Chuck Machine Tool Lathe Chuck

SANOU 4 Jaw Self-centering Chuck K12-80 3″ inch 4 jaws Chuck Machine Tool Lathe Chuck - Give a jinslu logo welding gauge as gift. Two sets of jaws 1set internal jaw and 1 set external jaw.

 

1-14 x 8 TPI Self-Centering 4-Jaw Chuck

1-1/4″ x 8 TPI Self-Centering 4-Jaw Chuck

1-1/4″ x 8 TPI Self-Centering 4-Jaw Chuck - You’ll appreciate the following features wide range of jaw movement, quick action and a powerful grip in either expansion or contraction modes. Jaws will expand and grip in a 2-3″ dovetailed recess in the base of your turning. Expand the versatility of your lathe and mount your workpieces quicker and easier with the self-centering 4-jaw chuck. Everything is secure in a fitted plastic storage/carrying case. Comes complete with screw center, locking levers, t-handled hex wrench for jaw screws and 8 extra jaw screws. No disassembly or accessories are required to use the accompanying screw chuck, which has a 1-1/8″ long right hand thread. Chuck body is chrome-plated to protect against corrosion while the jaws are anodized black. Simply rotate the chuck’s outer ring in the opposite direction to firmly hold round stock between 1-5/8″ and 2-3/4″ or square billets 1-1/8″ to 2-1/8″ in size.

 

Grizzly G9821 8-Inch 3-Jaw Scrol Length Chuck D1-4

Grizzly G9821 8-Inch 3-Jaw Scrol Length Chuck D1-4

Grizzly G9821 8-Inch 3-Jaw Scrol Length Chuck D1-4 - . These direct mount chucks come with the studs in the back and fit directly into your lathe cam-lock. See the 4 jaw chucks below for definition of “direct mount”. Jaws are self-centering. The bodies are made of semi-steel and the two-piece reversible jaws are hardened.

 

1076 - 31 4-Jaw Self-centering Chuck

1076 – 3.1″ 4-Jaw Self-centering Chuck

1076 – 3.1″ 4-Jaw Self-centering Chuck - 4 jaws hold round, square or tubular stock. Includes two spindle bars for adjustment. Hardened steel reversible jaws. Hold parts from 3/32 to 1-1/2 in regular position, to 2-3/4 with jaws reversed. Jaws scroll together when outer ring of chuck is turned for quick centering of material.

 

Hurricane Turning Tools HTC125 5-Inch Woodturning 4 Jaw Chuck Kit with Dovetail Jaws for Wood Lathes with 1 x 8-Inch TPI Spindles

Hurricane Turning Tools, HTC125 5-Inch Woodturning 4 Jaw Chuck Kit with Dovetail Jaws for Wood Lathes with 1 x 8-Inch TPI Spindles

Hurricane Turning Tools, HTC125 5-Inch Woodturning 4 Jaw Chuck Kit with Dovetail Jaws for Wood Lathes with 1 x 8-Inch TPI Spindles - Please note that this chuck is the larger in size of the two hurricane chucks. It is recommended for full size lathes only. We would like to introduce you to the hurricane htc125 125mm (5″) 4 jaw self centering woodturning chuck. Many optional jaw sets are available (sold separately) for various woodturning applications. This is an outstanding quality chuck that compares to some of the “famous names” on the market. Available in several spindle threads to suit almost all lathes. It is perfect for large bowl projects. If you are looking for a smaller chuck for small to medium bowls, check out the htc100 4″ chuck in our amazon store. This is a 5″ chuck which compares in size to the vicmarc vm120 chucks. It provides a superb grip on your woodturning projects such as bowls and platters.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.