Best 18 10 24 Threads

 

18-8 Stainless Steel Thread Cutting Screw Plain Finish 82 Degree Flat Undercut Head Phillips Drive Type 23 10-24 Thread Size 34 Length Pack of 25

18-8 Stainless Steel Thread Cutting Screw, Plain Finish, 82 Degree Flat Undercut Head, Phillips Drive, Type 23, #10-24 Thread Size, 3/4″ Length (Pack of 25)

18-8 Stainless Steel Thread Cutting Screw, Plain Finish, 82 Degree Flat Undercut Head, Phillips Drive, Type 23, #10-24 Thread Size, 3/4″ Length (Pack of 25) - Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes. 18-8 stainless steel provides good corrosion resistance and strength. Thread cutting screw with type 23 point style has fine threads that taper down to a blunt point with a large cutting surface suitable for soft metal, provides excellent chip clearance, and requires minimal rotating force to install. Plain surface has no finish or coating.

 

Bridle Rng 2 w10-24 Thread 100 per pack

Bridle Rng 2″ w/10-24 Thread, 100 per pack

Bridle Rng 2″ w/10-24 Thread, 100 per pack - Binding head is a slightly undercut, low-profile head with a round top and short vertical sides. Combination phillips slotted drive accepts both phillips and standard slotted drivers and is designed to prevent over-tightening. 2 inch loop size machine screw thread bridle ring with 10-24 threaded leg.

 

Steel Pan Head Machine Screw Black Oxide Finish Meets ASME B1863 2 Phillips Drive 10-24 Thread Size 1-34 Length Fully Threaded Import Pack of 50

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 1-3/4″ Length, Fully Threaded, Import (Pack of 50)

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 1-3/4″ Length, Fully Threaded, Import (Pack of 50) - Hex washer head has a flange for additional grip with the mating surface and has six flat sides that a wrench can grip to turn from the side. Plain surface has no finish or coating. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. 18-8 stainless steel provides good corrosion resistance and strength.

 

316 Stainless Steel Machine Screw Plain Finish Flat Head Phillips Drive 1-14 Length 10-24 Threads Pack of 25

316 Stainless Steel Machine Screw, Plain Finish, Flat Head, Phillips Drive, 1-1/4″ Length, #10-24 Threads (Pack of 25)

316 Stainless Steel Machine Screw, Plain Finish, Flat Head, Phillips Drive, 1-1/4″ Length, #10-24 Threads (Pack of 25) - Plain surface has no finish or coating. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Flat head is cone shaped for use in countersunk holes and has a flat top that fits flush with the mated surface. 316 stainless steel provides strength and better corrosion resistance than 18-8 stainless steel.

 

Nylon 66 Pan Head Machine Screw Black 2 Phillips Drive 10-24 Thread Size 1-12 Length Fully Threaded USA Made Pack of 100

Nylon 6/6 Pan Head Machine Screw, Black, #2 Phillips Drive, #10-24 Thread Size, 1-1/2″ Length, Fully Threaded, USA Made (Pack of 100)

Nylon 6/6 Pan Head Machine Screw, Black, #2 Phillips Drive, #10-24 Thread Size, 1-1/2″ Length, Fully Threaded, USA Made (Pack of 100) - Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Flat undercut head has a flat top with an 82-degree cone-shaped bearing surface and is undercut for use in shallow countersunk holes. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. 18-8 stainless steel provides good corrosion resistance and strength. Plain surface has no finish or coating.

 

LASCO SB-506 Faucet Handle Screw with 12-Inch x 10-24 Thread and Chrome Plated Oval Head 2-Pack

LASCO SB-506 Faucet Handle Screw with 1/2-Inch x 10-24 Thread and Chrome Plated Oval Head, 2-Pack

LASCO SB-506 Faucet Handle Screw with 1/2-Inch x 10-24 Thread and Chrome Plated Oval Head, 2-Pack - Commonly used size. Faucet replacement part. Lasco sb-506 faucet handle screw, 1/2-inch x 10-24 thread, chrome plated oval head, 2-pack. Industry number s-506. 1/2-inch x 10-24 thread. Chrome plated oval head faucet handle screw.

 

Steel Standard U-Style Clip-On Nut Plain Finish 10-24 Thread Size For 0025-004 Material Thickness 0203 Edge Distance Pack of 25

Steel Standard U-Style Clip-On Nut, Plain Finish, #10-24 Thread Size, For 0.025″-0.04″ Material Thickness, 0.203″ Edge Distance (Pack of 25)

Steel Standard U-Style Clip-On Nut, Plain Finish, #10-24 Thread Size, For 0.025″-0.04″ Material Thickness, 0.203″ Edge Distance (Pack of 25) - Plain surface has no. Steel is often used in applications where strength is the primary consideration. Designed to clip onto panels for quick alignment and fasten with a machine screw for a secure hold. Clip is u-shaped for a secure hold on both sides of the panel when screwing down.

 

Steel Pan Head Machine Screw Black Oxide Finish Meets ASME B1863 2 Phillips Drive 10-24 Thread Size 2 Length Fully Threaded Import Pack of 50

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 2″ Length, Fully Threaded, Import (Pack of 50)

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 2″ Length, Fully Threaded, Import (Pack of 50) - Black oxide finish offers mild corrosion resistance and lubricity. Alloy steel is often used in applications where strength is the primary consideration. Hex socket drive has a hexagonal slot that turns using an allen key driver, permitting more compact spacing than a hex head cap screw. Low-head socket cap is round with a flat top and half the height of a standard socket cap head for use in thin materials and low-clearance applications.

 

Steel Pan Head Machine Screw Black Oxide Finish Meets ASME B1863 2 Phillips Drive 10-24 Thread Size 1-14 Length Fully Threaded Import Pack of 100

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 1-1/4″ Length, Fully Threaded, Import (Pack of 100)

Steel Pan Head Machine Screw, Black Oxide Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 1-1/4″ Length, Fully Threaded, Import (Pack of 100) - They are available with a variety of head shapes, which determine how the screw interacts with the mating surface, and drive styles, which determine the type of driver required to install and remove the screw. Machine screws are threaded fasteners that are typically used with nuts or drilled and tapped (threaded) holes.

 

18-8 Stainless Steel Thread Cutting Screw Plain Finish Hex Washer Head Type F 10-24 Thread Size 12 Length Pack of 25

18-8 Stainless Steel Thread Cutting Screw, Plain Finish, Hex Washer Head, Type F, #10-24 Thread Size, 1/2″ Length (Pack of 25)

18-8 Stainless Steel Thread Cutting Screw, Plain Finish, Hex Washer Head, Type F, #10-24 Thread Size, 1/2″ Length (Pack of 25) - Hex washer head has a flange for additional grip with the mating surface and has six flat sides that a wrench can grip to turn from the side. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. 18-8 stainless steel provides good corrosion resistance and strength. Plain surface has no finish or coating.

 

18-8 Stainless Steel Pan Head Machine Screw Black Oxide Finish Meets MS-51957 2 Phillips Drive 10-24 Thread Size 38 Length Fully Threaded USA Made Pack of 25

18-8 Stainless Steel Pan Head Machine Screw, Black Oxide Finish, Meets MS-51957, #2 Phillips Drive, #10-24 Thread Size, 3/8″ Length, Fully Threaded, USA Made (Pack of 25)

18-8 Stainless Steel Pan Head Machine Screw, Black Oxide Finish, Meets MS-51957, #2 Phillips Drive, #10-24 Thread Size, 3/8″ Length, Fully Threaded, USA Made (Pack of 25) - Zinc plating resists corrosion and has a reflective appearance. Wafer head has a flat top, a 70-degree cone-shaped bearing surface, and a small slope between the top and the bearing surface. Star drive has a six-pointed indentation that provides a large contact area for the driver, resisting slippage better than a phillips or slotted drive. Steel is often used in applications where strength is the primary consideration.

 

Steel Truss Head Machine Screw Zinc Plated Finish Meets ASME B1863 2 Phillips Drive 10-24 Thread Size 34 Length Fully Threaded Imported Pack of 100

Steel Truss Head Machine Screw, Zinc Plated Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 3/4″ Length, Fully Threaded, Imported (Pack of 100)

Steel Truss Head Machine Screw, Zinc Plated Finish, Meets ASME B18.6.3, #2 Phillips Drive, #10-24 Thread Size, 3/4″ Length, Fully Threaded, Imported (Pack of 100) - Zinc plating resists corrosion and has a reflective appearance. Slotted drive has a linear slot for use with a flat-blade driver. Hex head tightens from the side with a wrench, enabling use when there is no space above for a driver. Steel is often used in applications where strength is the primary consideration. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic.

 

Steel Thread Cutting Screw Black Zinc Plated Truss Head Phillips Drive Type F 10-24 Thread Size 38 Length Pack of 50

Steel Thread Cutting Screw, Black Zinc Plated, Truss Head, Phillips Drive, Type F, #10-24 Thread Size, 3/8″ Length (Pack of 50)

Steel Thread Cutting Screw, Black Zinc Plated, Truss Head, Phillips Drive, Type F, #10-24 Thread Size, 3/8″ Length (Pack of 50) - Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Steel is often used in applications where strength is the primary consideration. Zinc plating resists corrosion and has a black reflective appearance. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Truss head has an extra-wide low-profile domed shape for applications with minimal clearance.

 

Steel Machine Screw Zinc Plated Finish Flat Head Phillips Drive 34 Length 10-24 Threads Pack of 100

Steel Machine Screw, Zinc Plated Finish, Flat Head, Phillips Drive, 3/4″ Length, #10-24 Threads (Pack of 100)

Steel Machine Screw, Zinc Plated Finish, Flat Head, Phillips Drive, 3/4″ Length, #10-24 Threads (Pack of 100) - Steel is often used in applications where strength is the primary consideration. Zinc plating resists corrosion resistance and has a reflective appearance. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Flat head is cone shaped for use in countersunk holes and has a flat top that fits flush with the mated surface.

 

Nylon 66 Pan Head Machine Screw Black 2 Phillips Drive 10-24 Thread Size 1 Length Fully Threaded USA Made Pack of 100

Nylon 6/6 Pan Head Machine Screw, Black, #2 Phillips Drive, #10-24 Thread Size, 1″ Length, Fully Threaded, USA Made (Pack of 100)

Nylon 6/6 Pan Head Machine Screw, Black, #2 Phillips Drive, #10-24 Thread Size, 1″ Length, Fully Threaded, USA Made (Pack of 100) - Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Steel is often used in applications where strength is the primary consideration. Zinc plating resists corrosion resistance and has a reflective appearance. Flat head is cone shaped for use in countersunk holes and has a flat top that fits flush with the mated surface.

 

Unbrako 1100579 Alloy Steel Socket Cap Screw Black Oxide Finish Low-Head Socket Cap Head Hex Socket Drive Right Hand Threads 10-24 Thread Size 12 Length Fully Threaded Pack of 100

Unbrako 1100579 Alloy Steel Socket Cap Screw, Black Oxide Finish, Low-Head Socket Cap Head, Hex Socket Drive, Right Hand Threads, #10-24 Thread Size, 1/2″ Length, Fully Threaded (Pack of 100)

Unbrako 1100579 Alloy Steel Socket Cap Screw, Black Oxide Finish, Low-Head Socket Cap Head, Hex Socket Drive, Right Hand Threads, #10-24 Thread Size, 1/2″ Length, Fully Threaded (Pack of 100) - Black oxide finish offers mild corrosion resistance and lubricity. Alloy steel is often used in applications where strength is the primary consideration. Low-head socket cap is round with a flat top and half the height of a standard socket cap head for use in thin materials and low-clearance applications. Hex socket drive has a hexagonal slot that turns using an allen key driver, permitting more compact spacing than a hex head cap screw.

 

Black Oxide Alloy Steel Hex Socket Head Cap Screw Self Locking 10-24 Thread Size 34 Length Fully Threaded Pack of 25

Black Oxide Alloy Steel Hex Socket Head Cap Screw, Self Locking, #10-24 Thread Size, 3/4″ Length, Fully Threaded (Pack of 25)

Black Oxide Alloy Steel Hex Socket Head Cap Screw, Self Locking, #10-24 Thread Size, 3/4″ Length, Fully Threaded (Pack of 25) - Hex washer head has a flange for additional grip with the mating surface and has six flat sides that a wrench can grip to turn from the side. Plain surface has no finish or coating. Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. 18-8 stainless steel provides good corrosion resistance and strength.

 

Steel Thread Cutting Screw Black Oxide Finish 82 Degree Flat Head Phillips Drive Type F 10-24 Thread Size 1 Length Pack of 100

Steel Thread Cutting Screw, Black Oxide Finish, 82 Degree Flat Head, Phillips Drive, Type F, #10-24 Thread Size, 1″ Length (Pack of 100)

Steel Thread Cutting Screw, Black Oxide Finish, 82 Degree Flat Head, Phillips Drive, Type F, #10-24 Thread Size, 1″ Length (Pack of 100) - Thread cutting screw with type f point has machine screw threads that taper down to a blunt edge and is suitable for heavy gauge sheet metal, aluminum, cast iron, brass, and plastic. Steel is often used in applications where strength is the primary consideration. Black oxide finish offers mild corrosion resistance and lubricity. Phillips drive has an x-shaped slot that accepts a phillips driver and is designed to prevent over-tightening. Flat head has an 82-degree cone-shaped bearing surface for use in countersunk holes and a flat top that fits flush with the mated surface.