Best 24 Die Nuts

 

M12 x 15mm Metric Die Nut Tungsten Steel Thread Cutter 15 38mm TD045

M12 x 1.5mm Metric Die Nut, Tungsten Steel, Thread Cutter 1.5″ (38mm) TD045

M12 x 1.5mm Metric Die Nut, Tungsten Steel, Thread Cutter 1.5″ (38mm) TD045 - Suitable for most materials such as steel, aluminium, copper etc. . Includes one die nut. Other sizes and pitches are available in our shop. 5mm. Size m12 x 1. High quality die suitable for professional or occasional use. Right hand thread. Made from hardened tungsten steel.

 

516 x 24 UNF Imperial Die Nut 1 25mm Tungsten Steel TD116

5/16″ x 24 UNF Imperial Die Nut 1″ (25mm) Tungsten Steel TD116

5/16″ x 24 UNF Imperial Die Nut 1″ (25mm) Tungsten Steel TD116 - Right hand threads. Made from hardened tungsten steel. Suitable for most materials such as steel, aluminium, copper etc. Size 5/16″ x 24 unf. High quality taps suitable for professional or occasional use. Includes two taps, one taper tap and one plug tap. Other sizes and pitches are available in our shop.

 

M16 x 2mm Metric Die Nut Tungsten Steel Thread Cutter 15 38mm TD037

M16 x 2mm Metric Die Nut, Tungsten Steel, Thread Cutter 1.5″ (38mm) TD037

M16 x 2mm Metric Die Nut, Tungsten Steel, Thread Cutter 1.5″ (38mm) TD037 - Right hand thread. Other sizes and pitches are available in our shop. Suitable for most materials such as steel, aluminium, copper etc. High quality die suitable for professional or occasional use. Made from hardened tungsten steel. Size m16 x 2mm. Includes one die nut.

 

M5 x 08mm Metric Die Nut Tungsten Steel Thread Cutter 1 25mm TD067

M5 x 0.8mm Metric Die Nut, Tungsten Steel, Thread Cutter 1″ (25mm) TD067

M5 x 0.8mm Metric Die Nut, Tungsten Steel, Thread Cutter 1″ (25mm) TD067 - High quality die suitable for professional or occasional use. Right hand thread. Other sizes and pitches are available in our shop. 8mm. Made from hardened tungsten steel. . Includes one die nut. Suitable for most materials such as steel, aluminium, copper etc. Size m5 x 0.

 

T&E Tools 8 Piece UNC Rethreader Die Nut Set

T&E Tools 8 Piece UNC Rethreader Die Nut Set

T&E Tools 8 Piece UNC Rethreader Die Nut Set - Actual nut size rethreading dies will not undercut or damage existing threads. 9/16 x 12, 5/8 x 11, 3/4 x 10 not for use on hardened threads or to cut new threads. Set of 8 unc die is size x threads-per-inch (tpi) 1/4 x 20, 5/16 x 18, 3/8 x 16, 7/16 x 14, 1/2 x 13. Allows access to rethread bolts where standard die can’t fit. Made in usa from highest quality carbon steel to exacting thread sizes.

 

16 mm X 20 Metric Hex Die Nut

16 mm X 2.0 Metric Hex Die Nut

16 mm X 2.0 Metric Hex Die Nut - Thread size 16mmpitch 2. 00outside diameter 1-1/4″material carbon steelused for chasing over bruised or rusty external threadsuse with any open end, adjustable wrench or appropriate hex die stock.

 

M11 x 1mm Metric Die Nut Tungsten Steel Thread Cutter 15 38mm TD051

M11 x 1mm Metric Die Nut, Tungsten Steel, Thread Cutter 1.5″ (38mm) TD051

M11 x 1mm Metric Die Nut, Tungsten Steel, Thread Cutter 1.5″ (38mm) TD051 - Suitable for most materials such as steel, aluminium, copper etc. Made from hardened tungsten steel. Includes one die nut. . Right hand thread. High quality die suitable for professional or occasional use. Size m11 x 1mm. Other sizes and pitches are available in our shop.

 

M14 x 2mm Metric Die Nut Tungsten Steel Thread Cutter 15 38mm TD040

M14 x 2mm Metric Die Nut, Tungsten Steel, Thread Cutter 1.5″ (38mm) TD040

M14 x 2mm Metric Die Nut, Tungsten Steel, Thread Cutter 1.5″ (38mm) TD040 - . Size m14 x 2mm. Right hand thread. Made from hardened tungsten steel. Includes one die nut. Suitable for most materials such as steel, aluminium, copper etc. Other sizes and pitches are available in our shop. High quality die suitable for professional or occasional use.

 

10 x 32 UNF Imperial Die Nut 1 25mm Tungsten Steel TD123

10 x 32 UNF Imperial Die Nut 1″ (25mm) Tungsten Steel TD123

10 x 32 UNF Imperial Die Nut 1″ (25mm) Tungsten Steel TD123 - Suitable for most materials such as steel, aluminium, copper etc. . Size 10 x 32 unf. Other sizes and pitches are available in our shop. High quality taps suitable for professional or occasional use. Includes two taps, one taper tap and one plug tap. Made from hardened tungsten steel. Right hand threads.

 

14 x 32 UNS Unified Imperial Die Nut 1 25mm Tungsten Steel TD118

1/4″ x 32 UNS Unified Imperial Die Nut 1″ (25mm) Tungsten Steel TD118

1/4″ x 32 UNS Unified Imperial Die Nut 1″ (25mm) Tungsten Steel TD118 - High quality taps suitable for professional or occasional use. Includes two taps, one taper tap and one plug tap. Made from hardened tungsten steel. Size 1/4″ x 32 uns. Suitable for most materials such as steel, aluminium, copper etc. Right hand threads. . Other sizes and pitches are available in our shop.

 

M8 x 1mm Metric Die Nut Tungsten Steel Thread Cutter 1 25mm TD061

M8 x 1mm Metric Die Nut, Tungsten Steel, Thread Cutter 1″ (25mm) TD061

M8 x 1mm Metric Die Nut, Tungsten Steel, Thread Cutter 1″ (25mm) TD061 - Made from hardened tungsten steel. . High quality die suitable for professional or occasional use. Size m8 x 1mm. Includes one die nut. Right hand thread. Other sizes and pitches are available in our shop. Suitable for most materials such as steel, aluminium, copper etc.

 

16 mm X 150 Metric Hex Die Nut

16 mm X 1.50 Metric Hex Die Nut

16 mm X 1.50 Metric Hex Die Nut - Thread size 16mmpitch 1. 50outside diameter 1-1/4″material carbon steelused for chasing over bruised or rusty external threadsuse with any open end, adjustable wrench or appropriate hex die stock.

 

M12 x 075mm Metric Die Nut Tungsten Steel Thread Cutter 15 38mm TD048

M12 x 0.75mm Metric Die Nut, Tungsten Steel, Thread Cutter 1.5″ (38mm) TD048

M12 x 0.75mm Metric Die Nut, Tungsten Steel, Thread Cutter 1.5″ (38mm) TD048 - 75mm. Size m12 x 0. Other sizes and pitches are available in our shop. Includes one die nut. High quality die suitable for professional or occasional use. Right hand thread. Made from hardened tungsten steel. . Suitable for most materials such as steel, aluminium, copper etc.

 

M10 x 15mm Metric Die Nut Tungsten Steel Thread Cutter 15 38mm TD053

M10 x 1.5mm Metric Die Nut, Tungsten Steel, Thread Cutter 1.5″ (38mm) TD053

M10 x 1.5mm Metric Die Nut, Tungsten Steel, Thread Cutter 1.5″ (38mm) TD053 - Right hand thread. Suitable for most materials such as steel, aluminium, copper etc. High quality die suitable for professional or occasional use. 5mm. Includes one die nut. Other sizes and pitches are available in our shop. Made from hardened tungsten steel. Size m10 x 1.

 

1024 Hex Die Nut

10/24 Hex Die Nut

10/24 Hex Die Nut - Thread size 10/24″outside diameter 1″material carbon steelused for chasing over bruised or rusty external threadsuse with any open end, adjustable wrench or appropriate hex die stock.

 

M7 x 075mm Metric Die Nut Tungsten Steel Thread Cutter 1 25mm TD064

M7 x 0.75mm Metric Die Nut, Tungsten Steel, Thread Cutter 1″ (25mm) TD064

M7 x 0.75mm Metric Die Nut, Tungsten Steel, Thread Cutter 1″ (25mm) TD064 - High quality die suitable for professional or occasional use. Right hand thread. Includes one die nut. Suitable for most materials such as steel, aluminium, copper etc. 75mm. Made from hardened tungsten steel. . Size m7 x 0. Other sizes and pitches are available in our shop.

 

M6 x 075mm Metric Die Nut Tungsten Steel Thread Cutter 1 25mm TD066

M6 x 0.75mm Metric Die Nut, Tungsten Steel, Thread Cutter 1″ (25mm) TD066

M6 x 0.75mm Metric Die Nut, Tungsten Steel, Thread Cutter 1″ (25mm) TD066 - Other sizes and pitches are available in our shop. Size m6 x 0. Suitable for most materials such as steel, aluminium, copper etc. . High quality die suitable for professional or occasional use. Right hand thread. Includes one die nut. Made from hardened tungsten steel. 75mm.

 

38-16 Hex Die Nut

3/8″-16 Hex Die Nut

3/8″-16 Hex Die Nut - Thread size 3/8″-16outside diameter 1″material carbon steelused for chasing over bruised or rusty external threadsuse with any open end, adjustable wrench or appropriate hex die stock.

 

Volkel 14mm x 20 HSS Hexagon Die Nut by VÃ-LKEL

Volkel 14mm x 2.0 HSS Hexagon Die Nut by VÃ-LKEL

Volkel 14mm x 2.0 HSS Hexagon Die Nut by VÃ-LKEL - Pitch, 2. Size, 14mm. Thickness, 14mmmanufactured from high speed steel (hss)ideal for maintenance and repair. 0mmused for cleaning and repairing damaged threadswidth across flats, 36mm.

 

M7 x 1mm Metric Die Nut Tungsten Steel Thread Cutter 1 25mm TD063

M7 x 1mm Metric Die Nut, Tungsten Steel, Thread Cutter 1″ (25mm) TD063

M7 x 1mm Metric Die Nut, Tungsten Steel, Thread Cutter 1″ (25mm) TD063 - High quality die suitable for professional or occasional use. Suitable for most materials such as steel, aluminium, copper etc. Includes one die nut. Right hand thread. Made from hardened tungsten steel. . Other sizes and pitches are available in our shop. Size m7 x 1mm.

 

58-18 Hex Die Nut

5/8″-18 Hex Die Nut

5/8″-18 Hex Die Nut - Thread size 5/8″-18outside diameter1-1/4″material carbon steelused for chasing over bruised or rusty external threadsuse with any open end, adjustable wrench or appropriate hex die stock.

 

14 x 20 UNC Imperial Die Nut 1 25mm Tungsten Steel TD121

1/4″ x 20 UNC Imperial Die Nut 1″ (25mm) Tungsten Steel TD121

1/4″ x 20 UNC Imperial Die Nut 1″ (25mm) Tungsten Steel TD121 - High quality taps suitable for professional or occasional use. Right hand threads. Other sizes and pitches are available in our shop. Includes two taps, one taper tap and one plug tap. Made from hardened tungsten steel. Suitable for most materials such as steel, aluminium, copper etc. Size 1/4″ x 20 unc. .

 

12 x 13 UNC Imperial Die Nut 15 38mm Tungsten Steel TD111

1/2″ x 13 UNC Imperial Die Nut 1.5″ (38mm) Tungsten Steel TD111

1/2″ x 13 UNC Imperial Die Nut 1.5″ (38mm) Tungsten Steel TD111 - Suitable for most materials such as steel, aluminium, copper etc. Other sizes and pitches are available in our shop. Size 1/2″ x 13 unc. Made from hardened tungsten steel. Right hand threads. High quality taps suitable for professional or occasional use. Includes two taps, one taper tap and one plug tap.

 

M11 x 125mm Metric Die Nut Tungsten Steel Thread Cutter 15 38mm TD050

M11 x 1.25mm Metric Die Nut, Tungsten Steel, Thread Cutter 1.5″ (38mm) TD050

M11 x 1.25mm Metric Die Nut, Tungsten Steel, Thread Cutter 1.5″ (38mm) TD050 - Includes one die nut. 25mm. Right hand thread. Size m11 x 1. High quality die suitable for professional or occasional use. Suitable for most materials such as steel, aluminium, copper etc. Made from hardened tungsten steel. . Other sizes and pitches are available in our shop.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.