Best 25 Stile Router Bits

 

Yonico 12122 Glass Door Rail and Stile Reversible Router Bit 12-Inch Shank 1-Piece

Yonico 12122 Glass Door Rail and Stile Reversible Router Bit 1/2-Inch Shank, 1-Piece

Yonico 12122 Glass Door Rail and Stile Reversible Router Bit 1/2-Inch Shank, 1-Piece - Made with c3 micrograin carbide, yonico router bits will endure multiple use providing a smooth and detailed finish every time. The yonico 12122 glass door rail and stile router bit will make glass doors with one reversible router bit. Two flute carbide cutters and 1/2″ shank. Glass doors enhance formal dining room furniture and curios and are an excellent way to dress up your kitchen. Use with up to 1″ stock. .

 

Traditional Stile and Rail Router Bit Set

Traditional Stile and Rail Router Bit Set

Traditional Stile and Rail Router Bit Set - The one-piece cutting edge allows you to achieve a perfect fit without having to disassemble an arbor and install shims. Precision balanced for smooth operation. 5/8″ bearing. Final sharpening with 600, 800 grit diamond wheels. Use this rail and stile router bit set to create beautiful door frames for glass panel, flat panel and raised panel doors. K10 and k20 grade carbide for clean cutting action. Rockler rail and stile bit sets are manufactured to exacting standards and create perfectly matched cope and stick joints. 1/4″ x 3/8″ groove. Baked-on anti-stick coating to reduce pitch and resin buildup. If you are not 100% satisfied with these bits, send them back for a refund. With ball bearing guide, you can even use a template to build doors with curving rails.

 

Yonico 12243q Rail and Stile Router Bits with 2 Bit Standard Ogee 14-Inch Shank

Yonico 12243q Rail and Stile Router Bits with 2 Bit Standard Ogee 1/4-Inch Shank

Yonico 12243q Rail and Stile Router Bits with 2 Bit Standard Ogee 1/4-Inch Shank - Yonico rail and stile router bit set (12243q) will cut rail & stile for cabinet doors in the classic ogee design. Two flute carbide cutters & 1/4″ shanks. Fully enclosed ball bearing guides allow for precise rail and stile cuts without the use of a fence. Yonico rail and stile router bits produce impressive and perfect results with every cut yielding years of woodworking satisfaction. .

 

Classical Stile and Rail Router Bit Set

Classical Stile and Rail Router Bit Set

Classical Stile and Rail Router Bit Set - Use this rail and stile router bit set to create beautiful door frames for glass panel, flat panel and raised panel doors. K10 and k20 grade carbide for clean cutting action. 5/8″ bearing. Baked-on anti-stick coating to reduce pitch and resin buildup. 1/4″ x 3/8″ groove. If you are not 100% satisfied with these bits, send them back for a refund. The one-piece cutting edge allows you to achieve a perfect fit without having to disassemble an arbor and install shims. Rockler rail and stile bit sets are manufactured to exacting standards and create perfectly matched cope and stick joints. With ball bearing guide, you can even use a template to build doors with curving rails. Precision balanced for smooth operation. Final sharpening with 600, 800 grit diamond wheels.

 

Agile-Shop 2pcs Rail Stile Router Bit Set with 12 inch Shank Shaker for Woodworking

Agile-Shop 2pcs Rail & Stile Router Bit Set with 1/2 inch Shank Shaker for Woodworking

Agile-Shop 2pcs Rail & Stile Router Bit Set with 1/2 inch Shank Shaker for Woodworking - 1/2″ shanks. Materials body, solid hardened steel blade, industrial grade micro grain carbide package includes 2 x router bits. For up to 7/8″ stock. Create your own beautiful shaker style cabinet doors using rail & stile router bit set.

 

Freud 99-860 Optional Cutters Double Sided Doors for 99-760 New Premier Adjustable Rail Stile Router Bit System by Freud

Freud 99-860 Optional Cutters Double Sided Doors for 99-760 New Premier Adjustable Rail & Stile Router Bit System by Freud

Freud 99-860 Optional Cutters Double Sided Doors for 99-760 New Premier Adjustable Rail & Stile Router Bit System by Freud - Used with 99-760 new premier adjustable rail & stile bits allows for double profile doors with variable thicknesses and long tenonsperfect matching profile on all doors because it’s the same set of router bitsbit features freud’s perma-shield coating that reduces heat and pitch build up along with rustbit features freud’s tico hi-density carbide to maximize bit life and material finishmatches the quarter round profile on the 99-760 rail & stile set.

 

Infinity Tools 91-504 12 Shank Matched Rail Stile Router Bit Set Chamfer Profile With FREE Set-up Block

Infinity Tools 91-504, 1/2″ Shank Matched Rail & Stile Router Bit Set, Chamfer Profile With FREE Set-up Block

Infinity Tools 91-504, 1/2″ Shank Matched Rail & Stile Router Bit Set, Chamfer Profile With FREE Set-up Block - Precision machined from fatigue-proof steel for extra strength. Silver ptfe coating reduces resin build-up for fast and easy cleaning. Micro-grain carbide tips for a long life and repeated sharpening. 1-3/4″ cutter diameter with 7/16″ profile width. Chamfer profile with free 3/4″ setup block.

 

PORTER-CABLE 43560PC Ogee Stile Router Bit

PORTER-CABLE 43560PC Ogee Stile Router Bit

PORTER-CABLE 43560PC Ogee Stile Router Bit - 83. Dimensions -overall product weight0. 593-43560pc features -number of bits1 -size3/8″ -userouter bits.

 

EnPointâ„¢ High Precision 14 Medium Carbon Steel Shank Stile and Rail Router Cutter 22mm Dia Carbide-Tipped Wainscot Paneling Router Bit Woodworking Table Edge Stepping Router Bit for PVC MDF Carbon Fiber Wood Composites Plastics

EnPointâ„¢ High Precision 1/4″ Medium Carbon Steel Shank Stile and Rail Router Cutter 22mm Dia Carbide-Tipped Wainscot Paneling Router Bit Woodworking Table Edge Stepping Router Bit for PVC MDF Carbon Fiber Wood Composites Plastics

EnPointâ„¢ High Precision 1/4″ Medium Carbon Steel Shank Stile and Rail Router Cutter 22mm Dia Carbide-Tipped Wainscot Paneling Router Bit Woodworking Table Edge Stepping Router Bit for PVC MDF Carbon Fiber Wood Composites Plastics - Carbide-tipped cutting edge brings sharper cutting experience and high work efficiency. It is usually used for architectural and furniture molding and also be used in handled, table-mounted and cnc router. Adoption of medium carbon steel for shank and fine mirror-like finish, excellent carbide brazing premium spray-painting makes more smoother and easier chip clearance. Mainly used for hardwood, redwood, acrylic, medium density fiber, pvc etc, using plunge form bits for routing decorative details on the face side of raised pannels or solid wood paneling, or on the edge using a fence. With use of high-frequency welding comes outstanding longevity, little chance of breaking high-speed steel body for high hardness, wear-resisting and heat-resisting.

 

SET-505 Set-Up Blocks For Infinity Tools Shaker Profile Rail Stile Router Bits

SET-505, Set-Up Blocks For Infinity Tools Shaker Profile Rail & Stile Router Bits

SET-505, Set-Up Blocks For Infinity Tools Shaker Profile Rail & Stile Router Bits - The height of your bit is automatically set so you don’t have to make any trial cuts so you don’t wase time or material. Made from pre-machined high density plastic they will make frustrating bit set-up’s a thing of the past. These new jigs are so handy we wouldn’t go into the shop without them. Just line-up the 3/4″ thick block so it matches the profile of your cutter and your done. For use with 3/4″ stock only, will work with most manufacturer’s bits.

 

Yonico 12339q Rail and Stile with Panel Raiser Router Bit Set Cove 14-Inch Shank 3-Piece

Yonico 12339q Rail and Stile with Panel Raiser Router Bit Set Cove 1/4-Inch Shank, 3-Piece

Yonico 12339q Rail and Stile with Panel Raiser Router Bit Set Cove 1/4-Inch Shank, 3-Piece - Ball bearing guides allow you to make precise cuts without the use of a fence. Bit shanks are 1/4″. The yonico 12339q router bit set comes in a solid wood storage case. Router bit measurements • rail & stile, 1-3/4″ diameter, 1″ cutter height, 2-7/8″ overall height, 3/8″ depth of cut, 7/8″ bearing diameter • panel raiser, 2-1/2″ diameter, 1/2″ cutter height, 2-7/16″ overall height, 1″ depth of cut, 1/2″ bearing diameter rail and stile bits create a perfectly matched rail and stile door frame. The yonico 12339q door construction router bit set includes 1/4″ round over rail and stile bits and a 1/4″ cove panel raiser. . The cove raised panel router bit cuts a stylish edge on the central panel of your door. For use with up to 1″ stock.

 

Infinity Tools 91-525 12 Shank Interior Exterior Door Making Rail Stile Router Bit Set Shaker Profile

Infinity Tools 91-525, 1/2″ Shank Interior & Exterior Door Making Rail & Stile Router Bit Set, Shaker Profile

Infinity Tools 91-525, 1/2″ Shank Interior & Exterior Door Making Rail & Stile Router Bit Set, Shaker Profile - Save $$ by making your own doors with this versatile system that comes with both 1/4″ and 1/2″ kerf slot cutters for making doors out of 1-3/8″ or 1-3/4″ stock. Building 1-3/8″ interior or 1-3/4″ exterior-facing doors has never been easier than with the help of this specially designed 2-piece door set. This heavy duty set produces a 7/16″ wide profile.

 

Freud 99-290 732 Radius X 1-932 Height Bead One-Piece Rrail And Stile Router Bit 12 Shank

Freud 99-290 7/32″ Radius X 1-9/32″ Height Bead One-Piece Rrail And Stile Router Bit (1/2″ Shank)

Freud 99-290 7/32″ Radius X 1-9/32″ Height Bead One-Piece Rrail And Stile Router Bit (1/2″ Shank) - Works with a variety of stock thicknesses because frame members are cut face down. For use with table-mounted portable routers. Easily cuts composition materials, hardwoods, softwoods, and plywoods. Produces attractive cabinet doors without having to change cutters or fence settings.

 

MLCS Stacked Rail and Stile Router Bit - Traditional Profile

MLCS Stacked Rail and Stile Router Bit – Traditional Profile

MLCS Stacked Rail and Stile Router Bit – Traditional Profile - All that is required is to simply lower or raise the bit. 1/2″ shank. The easy way to make perfect rails and stiles with only one bit. 2 flute, carbide-tipped with totally enclosed ball bearing guide. Cut rails and stiles without having to reverse, switch or reassemble cutters, or without having to remove the bit from your router. For best results use only with your router mounted in a table.

 

EnPointâ„¢ 1564 6mm Medium Carbon Steel Shank Stile and Rail Router Cutter 22mm Dia Carbide-Tipped Wainscot Paneling Router Bit Woodworking Table Edge Stepping Router Bit for PVC MDF Carbon Fiber Wood Composites Plastics

EnPointâ„¢ 15/64″ 6mm Medium Carbon Steel Shank Stile and Rail Router Cutter 22mm Dia Carbide-Tipped Wainscot Paneling Router Bit Woodworking Table Edge Stepping Router Bit for PVC MDF Carbon Fiber Wood Composites Plastics

EnPointâ„¢ 15/64″ 6mm Medium Carbon Steel Shank Stile and Rail Router Cutter 22mm Dia Carbide-Tipped Wainscot Paneling Router Bit Woodworking Table Edge Stepping Router Bit for PVC MDF Carbon Fiber Wood Composites Plastics - Medium carbon steel for shank and super fine mirror-like finish, excellent carbide brazing premium spray-painting makes more smoother and easier chip clearance. With use of high-frequency welding comes outstanding longevity, little chance of breaking high-speed steel body for high hardness, wear-resisting and heat-resisting. It is usually used for architectural and furniture molding and also be used in handled, table-mounted and cnc router. Carbide-tipped cutting edge brings sharper cutting experience and high work efficiency. Mainly used for hardwood, redwood, acrylic, medium density fiber, pvc etc, using plunge form bits for routing decorative details on the face side of raised pannels or solid wood paneling, or on the edge using a fence.

 

Infinity Tools 91-501 12 Shank Matched Rail Stile Router Bit Set Ogee Profile With FREE Set-up Block

Infinity Tools 91-501, 1/2″ Shank Matched Rail & Stile Router Bit Set, Ogee Profile With FREE Set-up Block

Infinity Tools 91-501, 1/2″ Shank Matched Rail & Stile Router Bit Set, Ogee Profile With FREE Set-up Block - Ogee profile with free 3/4″ setup block. Precision machined from fatigue-proof steel for extra strength. Silver ptfe coating reduces resin build-up for fast and easy cleaning. 1-3/4″ cutter diameter with 7/16″ profile width. Micro-grain carbide tips for a long life and repeated sharpening.

 

Round Stile and Rail Router Bit Set 1-38 Deep x 1 High

Round Stile and Rail Router Bit Set, 1-3/8” Deep x 1” High

Round Stile and Rail Router Bit Set, 1-3/8” Deep x 1” High - Features k10 and k20 grade carbide for clean cutting action. Precision balanced for smooth operation. The ball bearing guide allows you to use a template to build doors with curving rails. The one-piece design of these bits allows you to achieve a perfect fit without having to disassemble an arbor and install shims. Use this rail and stile router bit set to create beautiful door frames for glass panel, flat panel and raised panel doors. Baked-on anti-stick coating to reduce pitch and resin buildup. Rockler rail and stile bit sets are manufactured to exacting standards and create perfectly matched cope and stick joints.

 

Yonico 12119 Stacked Rail and Stile Router Bit with Cove 12-Inch Shank 1-Piece

Yonico 12119 Stacked Rail and Stile Router Bit with Cove 1/2-Inch Shank, 1-Piece

Yonico 12119 Stacked Rail and Stile Router Bit with Cove 1/2-Inch Shank, 1-Piece - The yonico stacked rail and stile router bit will cut both rail and stile in a cove design. Shank is 1/2″. . No need to switch or reassemble cutters. Two flute carbide cutters with ball bearing guide. Simply cut the stile and then lower the bit in your table to make the rail cuts.

 

MLCS Stacked Rail and Stile Router Bit - Ogee Profile

MLCS Stacked Rail and Stile Router Bit – Ogee Profile

MLCS Stacked Rail and Stile Router Bit – Ogee Profile - All that is required is to simply lower or raise the bit. 1/2″ shank. The easy way to make perfect rails and stiles with only one bit. For best results use only with your router mounted in a table. Cut rails and stiles without having to reverse, switch or reassemble cutters, or without having to remove the bit from your router. 2 flute, carbide-tipped with totally enclosed ball bearing guide.

 

MLCS Matched Rail and Stile Router Bit 2-Bit Set--Round Over Profile

MLCS Matched Rail and Stile Router Bit 2-Bit Set–Round Over Profile

MLCS Matched Rail and Stile Router Bit 2-Bit Set–Round Over Profile - Voted “best cut” in fine woodworking- #107. 2 piece matched set for perfectly mated joints. Free standard shipping in contiguous usa. Stylish rails and stiles for raised panel doors. Great quality and value.

 

MLCS Stacked Rail and Stile Router Bit - Beveled Profile

MLCS Stacked Rail and Stile Router Bit – Beveled Profile

MLCS Stacked Rail and Stile Router Bit – Beveled Profile - Cut rails and stiles without having to reverse, switch or reassemble cutters, or without having to remove the bit from your router. The easy way to make perfect rails and stiles with only one bit. All that is required is to simply lower or raise the bit. 1/2″ shank. 2 flute, carbide-tipped with totally enclosed ball bearing guide. For best results use only with your router mounted in a table.

 

CMT 87010111 Stile Router Bit 6364-Inch Diameter 14-Inch Shank

CMT 870.101.11 Stile Router Bit, 63/64-Inch Diameter, 1/4-Inch Shank

CMT 870.101.11 Stile Router Bit, 63/64-Inch Diameter, 1/4-Inch Shank - 2 hi-density carbide-tipped cutting edges for long-lasting performance. Decorative work on solid wood panels and mdf materials, a simple approach for an elegant appearance. 15/64-inch smaller diameter, 5/16-inch cutting length, 15/32-inch radius. Ptfe coating to protect bit against resin and pitch build-ups. Anti-kickback design to control the depth of cut and work safely.

 

Yonico 12338 Rail and Stile With Panel Bit Router Bit Set with Ogee 12-Inch Shank

Yonico 12338 Rail and Stile With Panel Bit Router Bit Set with Ogee 1/2-Inch Shank

Yonico 12338 Rail and Stile With Panel Bit Router Bit Set with Ogee 1/2-Inch Shank - The panel raiser puts a classic edge on the central panel of your door. Rail and stile bits create a perfectly matched rail and stile door frame. This 3 bit door making router bit set includes ogee rail and stile bits and a 2-1/2″ ogee panel raiser. Use with up to 1″ stock. Bit shanks are 1/2″. Ball bearing guides allow you to make precise cuts without the use of a fence. Features • industrial quality • c3 tungsten carbide cutters • solid hardened steel body • anti-kickback design • build-up resistant coating • satisfaction guaranteed. Comes in a solid wood storage case.

 

YaeTek Rail Stile Router Bit Set - Shaker 2 Pc 12 Shank

YaeTek Rail & Stile Router Bit Set – Shaker 2 Pc. 1/2″ Shank

YaeTek Rail & Stile Router Bit Set – Shaker 2 Pc. 1/2″ Shank - . Our bits are the preferred choice of professionals and hobbyists alike. Our router bits are manufactured using solid hardened steel and c3 micro grain carbide. Precise, designer profiles create smooth and detailed cuts, perfect for projects of any level of complexity. (C3 grade carbide is the highest grade used in the router bit industry) the result is a highly durable bit that can be utilized for the most rigorous industrial applications.

 

MLCS Matched Rail and Stile Router Bit 2-Bit Set--Beading Profile

MLCS Matched Rail and Stile Router Bit 2-Bit Set–Beading Profile

MLCS Matched Rail and Stile Router Bit 2-Bit Set–Beading Profile - Voted “best cut” in fine woodworking- #107. Cuts a 1/4″ thick x 3/8″ deep tongue on 3/4″ stock. 2 flute, carbide tipped. These cutters come as a matched 2 bit set so that the rail and stile match precisely. 1-5/8″ large diameter.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.