Best and Coolest 20 Bottoming Taps

 

12 mm x 15 High Speed Steel Bottoming Tap

12 mm x 1.5 High Speed Steel Bottoming Tap

12 mm x 1.5 High Speed Steel Bottoming Tap - . Bottoming style (bottoming taps have 1-2 threads of lead, for threading close to the bottom of a blind hole. Some manufacturers leave a point that you may have to grind off if going very close to the bottom of a hole. ) Ground thread. High speed steel. Please note that not all bottoming taps are flattened at the end.

 

11 mm x 15 High Speed Steel Bottoming Tap

11 mm x 1.5 High Speed Steel Bottoming Tap

11 mm x 1.5 High Speed Steel Bottoming Tap - Some manufacturers leave a point that you may have to grind off if going very close to the bottom of a hole. ) Ground thread. Bottoming style (bottoming taps have 1-2 threads of lead, for threading close to the bottom of a blind hole. High speed steel. Please note that not all bottoming taps are flattened at the end.

 

Vermont American 20271 High Carbon Steel NF Fractional Bottoming Tap - 516-inch by 24

Vermont American 20271 High Carbon Steel NF Fractional Bottoming Tap – 5/16-inch by 24

Vermont American 20271 High Carbon Steel NF Fractional Bottoming Tap – 5/16-inch by 24 - Required drill size is permanently etched on the tool for quick and easy reference. High carbon steel fractional bottoming taps are ideal for cutting right-hand internal threads. Bottoming taps have 1, 1/2 threads chamfered for tapping to the bottom of a hole. Four flute design on all taps ensures fast and easy chip clearance.

 

Vermont American 20261  8-32 NC High Carbon Steel Machine Screw Bottoming Tap

Vermont American 20261 8-32 NC High Carbon Steel Machine Screw Bottoming Tap

Vermont American 20261 8-32 NC High Carbon Steel Machine Screw Bottoming Tap - Drill size permanently marked on each tap. 1-1/2 threads chamfered, use after threads have been started for tapping to bottom of hole. Tough carbon tool steel for long life. Vermont american tap high carbon steel bottom 8-32 nc card. Cut cleaner more accurate threads and lasts longer. For cutting all types of internal threads. Right-hand thread taps in plug, taper and bottoming styles. Furnished in right hand threads with most sizes coming in special bright, hard chrome finish. High carbon steel bottoming 8-32 nc card. Made of super-tough carbon tool steel to exacting specifications, heat treated and tempered. Made to exacting specifications. Standard pipe and metric. Size=8-32nc.

 

Alfa Tools HSMTB72030 8mm x 075mm High-Speed Steel Metric Bottoming Tap Ground Thread-4 Flute

Alfa Tools HSMTB72030 8mm x 0.75mm High-Speed Steel Metric Bottoming Tap Ground Thread-4 Flute

Alfa Tools HSMTB72030 8mm x 0.75mm High-Speed Steel Metric Bottoming Tap Ground Thread-4 Flute - Standard “h” limits provide adequate class of fit. Bottoming taps (1 to 2 threads) used for threading close to the bottom of a blind hole. Suitable for tapping most materials. General purpose taps can be used by hand or under power, in through (open both ends) or blind holes (closed one end).

 

Vermont American 20276 12-Inch to 13 National Coarse High Carbon Steel Fractional Bottoming Tap

Vermont American 20276 1/2-Inch to 13 National Coarse High Carbon Steel Fractional Bottoming Tap

Vermont American 20276 1/2-Inch to 13 National Coarse High Carbon Steel Fractional Bottoming Tap - Four-flute design on all plug taps ensures fast and easy chip clearance. Bottoming taps have 1-1/2 threads chamfered for tapping to the bottom of a hole. Ideal for cutting right-hand internal threads.

 

Viking Drill and Tool 56150 Type 761 Hi-Carbon Bottoming Tap Bit 3 Pack 6-48

Viking Drill and Tool 56150 Type 761 Hi-Carbon Bottoming Tap Bit (3 Pack), 6-48″

Viking Drill and Tool 56150 Type 761 Hi-Carbon Bottoming Tap Bit (3 Pack), 6-48″ - Paul, minnesota manufacturing facility is specifically designed for the unique task of efficient high quality cutting tool manufacturing. The use of these extreme high quality materials insures that consistency is built in to every one of our u. S. At viking drill and tool, skilled machine operators working with the world’s finest raw materials have the capability of providing you with consistent high quality products time after time, year after year. All materials used at viking drill and tool meet the rigorous qualifications of national aerospace standard (nas) 907. S. This standard, recognized as the most stringent in the industry precludes the use of lower quality steels which do not hold up under rigorous applications. Consistency is a natural by-product of our experience and dedication to quality. Manufactured products. Committed to quality, consistency, service and value quality at viking drill and tool begins with the finest tool steel we can buy and ends with the world class products in our catalog. Our extensive selection of u. On our ultra bor super premium products, we routinely cut recognized tool tolerance standards by one half to insure that our customers receive drills manufactured to the tightest possible specification and utmost in consistency and accuracy. Manufactured tools is designed to give you the right tool at the right price for whatever tough job you come up against. Our 74,000 square foot st. Our cutting tools are designed, engineered and superbly crafted to provide long lasting durability.

 

Vermont American 20270 High Carbon Steel NC Fractional Bottoming Tap - 516-inch by 18

Vermont American 20270 High Carbon Steel NC Fractional Bottoming Tap – 5/16-inch by 18

Vermont American 20270 High Carbon Steel NC Fractional Bottoming Tap – 5/16-inch by 18 - Four flute design on all taps ensures fast and easy chip clearance. High carbon steel fractional bottoming taps are ideal for cutting right-hand internal threads. Bottoming taps have 1, 1/2 threads chamfered for tapping to the bottom of a hole. Required drill size is permanently etched on the tool for quick and easy reference.

 

12 mm x 175 High Speed Steel Bottoming Tap

12 mm x 1.75 High Speed Steel Bottoming Tap

12 mm x 1.75 High Speed Steel Bottoming Tap - High speed steel. Some manufacturers leave a point that you may have to grind off if going very close to the bottom of a hole. Please note that not all bottoming taps are flattened at the end. ) Ground thread. Bottoming style (bottoming taps have 1-2 threads of lead, for threading close to the bottom of a blind hole.

 

7 mm x 10 High Speed Steel Bottoming Tap PACK OF 2

7 mm x 1.0 High Speed Steel Bottoming Tap (PACK OF 2)

7 mm x 1.0 High Speed Steel Bottoming Tap (PACK OF 2) - Some manufacturers leave a point that you may have to grind off if going very close to the bottom of a hole. High speed steel. Bottoming style (1-2 threads of lead, for threading close to the bottom of a blind hole). Please note that not all bottoming taps are flattened at the end. Ground thread.

 

Alfa Tools HSMTB72065 16mm x 125mm High-Speed Steel Metric Bottoming Tap Ground Thread-4 Flute

Alfa Tools HSMTB72065 16mm x 1.25mm High-Speed Steel Metric Bottoming Tap Ground Thread-4 Flute

Alfa Tools HSMTB72065 16mm x 1.25mm High-Speed Steel Metric Bottoming Tap Ground Thread-4 Flute - Bottoming taps (1 to 2 threads) used for threading close to the bottom of a blind hole. Suitable for tapping most materials. General purpose taps can be used by hand or under power, in through (open both ends) or blind holes (closed one end). Standard “h” limits provide adequate class of fit.

 

20 mm x 15 High Speed Steel Bottoming Tap

20 mm x 1.5 High Speed Steel Bottoming Tap

20 mm x 1.5 High Speed Steel Bottoming Tap - Bottoming style (bottoming taps have 1-2 threads of lead, for threading close to the bottom of a blind hole. Please note that not all bottoming taps are flattened at the end. High speed steel. Some manufacturers leave a point that you may have to grind off if going very close to the bottom of a hole. ) ground thread.

 

Vermont American 20269 High Carbon Steel NF Fractional Bottoming Tap - 14-inch by 28

Vermont American 20269 High Carbon Steel NF Fractional Bottoming Tap – 1/4-inch by 28

Vermont American 20269 High Carbon Steel NF Fractional Bottoming Tap – 1/4-inch by 28 - Four flute design on all taps ensures fast and easy chip clearance. Bottoming taps have 1, 1/2 threads chamfered for tapping to the bottom of a hole. Required drill size is permanently etched on the tool for quick and easy reference. High carbon steel fractional bottoming taps are ideal for cutting right-hand internal threads.

 

Alfa Tools HTB80043 58-18 Hss Black Oxide Alfa Hand Tap Bottoming 3 Pack Made In USA

Alfa Tools HTB80043 5/8-18 Hss Black Oxide Alfa Hand Tap Bottoming (3 Pack) Made In USA,

Alfa Tools HTB80043 5/8-18 Hss Black Oxide Alfa Hand Tap Bottoming (3 Pack) Made In USA, - Alfa usa hand tap, black oxide. Bottoming taps (1 to 2 threads) used for threading close to the bottom of a blind hole. 5/8-inch by 18 tap size, 4 flutes. General purpose taps can be used by hand or under power, in through (open both ends) or blind holes (closed one end) super high-speed steel, ground thread, right hand. Quantity 3 per pack.

 

11 mm x 125 High Speed Steel Bottoming Tap

11 mm x 1.25 High Speed Steel Bottoming Tap

11 mm x 1.25 High Speed Steel Bottoming Tap - Some manufacturers leave a point that you may have to grind off if going very close to the bottom of a hole. Please note that not all bottoming taps are flattened at the end. ) ground thread. High speed steel. Bottoming style (bottoming taps have 1-2 threads of lead, for threading close to the bottom of a blind hole.

 

Alfa Tools HSMTB72052 13mm x 200mm High-Speed Steel Metric Bottoming Tap Ground Thread-4 Flute

Alfa Tools HSMTB72052 13mm x 2.00mm High-Speed Steel Metric Bottoming Tap Ground Thread-4 Flute

Alfa Tools HSMTB72052 13mm x 2.00mm High-Speed Steel Metric Bottoming Tap Ground Thread-4 Flute - Bottoming taps (1 to 2 threads) used for threading close to the bottom of a blind hole. Suitable for tapping most materials. General purpose taps can be used by hand or under power, in through (open both ends) or blind holes (closed one end). Standard “h” limits provide adequate class of fit.

 

8 mm x 125 High Speed Steel Bottoming Tap PACK OF 2

8 mm x 1.25 High Speed Steel Bottoming Tap (PACK OF 2)

8 mm x 1.25 High Speed Steel Bottoming Tap (PACK OF 2) - Please note that not all bottoming taps are flattened at the end. Ground thread. Bottoming style (1-2 threads of lead, for threading close to the bottom of a blind hole). High speed steel. Some manufacturers leave a point that you may have to grind off if going very close to the bottom of a hole.

 

5 mm x80 High Speed Steel Bottoming Tap PACK OF 2

5 mm x.80 High Speed Steel Bottoming Tap (PACK OF 2)

5 mm x.80 High Speed Steel Bottoming Tap (PACK OF 2) - High speed steel. Bottoming style (1-2 threads of lead, for threading close to the bottom of a blind hole). Please note that not all bottoming taps are flattened at the end. Some manufacturers leave a point that you may have to grind off if going very close to the bottom of a hole. Ground thread.

 

12 mm x 125 High Speed Steel Bottoming Tap

12 mm x 1.25 High Speed Steel Bottoming Tap

12 mm x 1.25 High Speed Steel Bottoming Tap - Bottoming style (bottoming taps have 1-2 threads of lead, for threading close to the bottom of a blind hole. Please note that not all bottoming taps are flattened at the end. High speed steel. ) Ground thread. Some manufacturers leave a point that you may have to grind off if going very close to the bottom of a hole.

 

9 mm x 5 High Speed Steel Bottoming Tap PACK OF 2

9 mm x .5 High Speed Steel Bottoming Tap (PACK OF 2)

9 mm x .5 High Speed Steel Bottoming Tap (PACK OF 2) - Please note that not all bottoming taps are flattened at the end. Some manufacturers leave a point that you may have to grind off if going very close to the bottom of a hole. Bottoming style (1-2 threads of lead, for threading close to the bottom of a blind hole). High speed steel. Ground thread.