Best and Coolest 22 Titanium Nitride Coatings

 

SGS 39113 1 4 Flute Square End General Purpose End Mill Titanium Nitride Coating 764 Cutting Diameter 38 Cutting Length 18 Shank Diameter 1-12 Length

SGS 39113 1 4 Flute Square End General Purpose End Mill, Titanium Nitride Coating, 7/64″ Cutting Diameter, 3/8″ Cutting Length, 1/8″ Shank Diameter, 1-1/2″ Length

SGS 39113 1 4 Flute Square End General Purpose End Mill, Titanium Nitride Coating, 7/64″ Cutting Diameter, 3/8″ Cutting Length, 1/8″ Shank Diameter, 1-1/2″ Length - Held to the same standard as high performance product, the sgs general purpose end mill delivers consistent dependable performance beyond a typical general purpose end mill. . Sgs general purpose end mills are manufactured to the highest standards on state of the art cnc equipment.

 

SGS 31767 1L 4 Flute Square End General Purpose End Mill Aluminum Titanium Nitride Coating 58 Cutting Diameter 2-14 Cutting Length 58 Shank Diameter 5 Length

SGS 31767 1L 4 Flute Square End General Purpose End Mill, Aluminum Titanium Nitride Coating, 5/8″ Cutting Diameter, 2-1/4″ Cutting Length, 5/8″ Shank Diameter, 5″ Length

SGS 31767 1L 4 Flute Square End General Purpose End Mill, Aluminum Titanium Nitride Coating, 5/8″ Cutting Diameter, 2-1/4″ Cutting Length, 5/8″ Shank Diameter, 5″ Length - Held to the same standard as high performance product, the sgs general purpose end mill delivers consistent dependable performance beyond a typical general purpose end mill. . Sgs general purpose end mills are manufactured to the highest standards on state of the art cnc equipment.

 

SGS 39131 1 4 Flute Square End General Purpose End Mill Titanium Nitride Coating 14 Cutting Diameter 34 Cutting Length 14 Shank Diameter 2-12 Length Model SGS 39131 Tools Hardware store

SGS 39131 1 4 Flute Square End General Purpose End Mill, Titanium Nitride Coating, 1/4 Cutting Diameter, 3/4 Cutting Length, 1/4 Shank Diameter, 2-1/2 Length, Model: SGS 39131, Tools & Hardware store

SGS 39131 1 4 Flute Square End General Purpose End Mill, Titanium Nitride Coating, 1/4 Cutting Diameter, 3/4 Cutting Length, 1/4 Shank Diameter, 2-1/2 Length, Model: SGS 39131, Tools & Hardware store - Sgs general purpose end mills are manufactured to the highest standards on state of the art cnc equipment. . Held to the same standard as high performance product, the sgs general purpose end mill delivers consistent dependable performance beyond a typical general purpose end mill.

 

SGS 36125 61 Single End Roughing End Mill Titanium Nitride Coating 34 Cutting Diameter 1-58 Cutting Length 34 Shank Diameter 4 Length 060 Corner Radius

SGS 36125 61 Single End Roughing End Mill, Titanium Nitride Coating, 3/4″ Cutting Diameter, 1-5/8″ Cutting Length, 3/4″ Shank Diameter, 4″ Length, .060″ Corner Radius

SGS 36125 61 Single End Roughing End Mill, Titanium Nitride Coating, 3/4″ Cutting Diameter, 1-5/8″ Cutting Length, 3/4″ Shank Diameter, 4″ Length, .060″ Corner Radius - . The carbide is designed to compliment the demanding environment of roughing operations. Sgs roughing end mills are available in 3 very distinct styles to meet the needs of specific material groups. Each version has an engineered chip breaking form to optimize performance in their key material groups.

 

SGS 68302 101 Slow Spiral Drills Aluminum Titanium Nitride Coating 21 mm Cutting Diameter 24 mm Cutting Length 49 mm Length

SGS 68302 101 Slow Spiral Drills, Aluminum Titanium Nitride Coating, 2.1 mm Cutting Diameter, 24 mm Cutting Length, 49 mm Length

SGS 68302 101 Slow Spiral Drills, Aluminum Titanium Nitride Coating, 2.1 mm Cutting Diameter, 24 mm Cutting Length, 49 mm Length - . Designed for effective drilling in a wide variety of materials and applications, the sgs general purpose line of drills are manufactured to the highest standards.

 

SGS 36531 Z1 Z-Carb High Performance End Mill Aluminum Titanium Nitride Coating with Flat 1332 Cutting Diameter 1516 Cutting Length 716 Shank Diameter 2-34 Length

SGS 36531 Z1 Z-Carb High Performance End Mill, Aluminum Titanium Nitride Coating with Flat, 13/32″ Cutting Diameter, 15/16″ Cutting Length, 7/16″ Shank Diameter, 2-3/4″ Length

SGS 36531 Z1 Z-Carb High Performance End Mill, Aluminum Titanium Nitride Coating with Flat, 13/32″ Cutting Diameter, 15/16″ Cutting Length, 7/16″ Shank Diameter, 2-3/4″ Length - By drastically reducing chatter, increasing tool life and optimizing cost savings, the z-carb changed the way we machine forever. . The z-carb family of end mills maximizes stock removal and improves productivity in most milling applications. The z-carb family of end mills are the first and original variable geometry end mill that changed the entire industry.

 

SGS 31882 1EL 4 Flute Square End General Purpose End Mill Aluminum Titanium Nitride Coating 14 Cutting Diameter 1-12 Cutting Length 14 Shank Diameter 4 Length

SGS 31882 1EL 4 Flute Square End General Purpose End Mill, Aluminum Titanium Nitride Coating, 1/4″ Cutting Diameter, 1-1/2″ Cutting Length, 1/4″ Shank Diameter, 4″ Length

SGS 31882 1EL 4 Flute Square End General Purpose End Mill, Aluminum Titanium Nitride Coating, 1/4″ Cutting Diameter, 1-1/2″ Cutting Length, 1/4″ Shank Diameter, 4″ Length - Held to the same standard as high performance product, the sgs general purpose end mill delivers consistent dependable performance beyond a typical general purpose end mill. . Sgs general purpose end mills are manufactured to the highest standards on state of the art cnc equipment.

 

SGS 70474 7 Series High Performance End Mill Aluminum Titanium Nitride Coating 14 Cutting Diameter 1-18 Cutting Length 14 Shank Diameter 3 Length

SGS 70474 7 Series High Performance End Mill, Aluminum Titanium Nitride Coating, 1/4″ Cutting Diameter, 1-1/8″ Cutting Length, 1/4″ Shank Diameter, 3″ Length

SGS 70474 7 Series High Performance End Mill, Aluminum Titanium Nitride Coating, 1/4″ Cutting Diameter, 1-1/8″ Cutting Length, 1/4″ Shank Diameter, 3″ Length - The series 7 end mill provides precision performance and high production rates without chatter. This is the tool that can deliver it all in long lengths of cut chatter suppression, longer tool life, better surface finishes, reduced harmonics and improved side-wall straightness. .

 

Aiskaer full-color lightweight titanium nitride coating Hex Driver Wrench 4 Piece SetHex Screw driver Tools Kit Set for RC Helicopter 15mm2mm25mm30mm

Aiskaer full-color lightweight titanium nitride coating Hex Driver Wrench 4 Piece Set,Hex Screw driver Tools Kit Set for RC Helicopter (1.5mm/2mm/2.5mm/3.0mm)

Aiskaer full-color lightweight titanium nitride coating Hex Driver Wrench 4 Piece Set,Hex Screw driver Tools Kit Set for RC Helicopter (1.5mm/2mm/2.5mm/3.0mm) - Color blue, silver, gray, gold. Total length 65 inchesthe wrench have magnetic characteristics. For using on heli’s m2 socket screw and m3 socket screw. Including 15mm x 1 2mm x 1 25mm x 1 3mm x 1. Light weight, comfortable grip,alloy handle、titanium nitride coating and replaceable bit.

 

SGS 30199 1 4 Flute Square End General Purpose End Mill Aluminum Titanium Nitride Coating 964 Cutting Diameter 12 Cutting Length 316 Shank Diameter 2 Length

SGS 30199 1 4 Flute Square End General Purpose End Mill, Aluminum Titanium Nitride Coating, 9/64″ Cutting Diameter, 1/2″ Cutting Length, 3/16″ Shank Diameter, 2″ Length

SGS 30199 1 4 Flute Square End General Purpose End Mill, Aluminum Titanium Nitride Coating, 9/64″ Cutting Diameter, 1/2″ Cutting Length, 3/16″ Shank Diameter, 2″ Length - Sgs general purpose end mills are manufactured to the highest standards on state of the art cnc equipment. Held to the same standard as high performance product, the sgs general purpose end mill delivers consistent dependable performance beyond a typical general purpose end mill. .

 

SGS 36509 Z16CR Z-Carb High Performance End Mill Aluminum Titanium Nitride Coating 14 Cutting Diameter 716 Cutting Length 14 Shank Diameter 2 Length

SGS 36509 Z16CR Z-Carb High Performance End Mill, Aluminum Titanium Nitride Coating, 1/4″ Cutting Diameter, 7/16″ Cutting Length, 1/4″ Shank Diameter, 2″ Length

SGS 36509 Z16CR Z-Carb High Performance End Mill, Aluminum Titanium Nitride Coating, 1/4″ Cutting Diameter, 7/16″ Cutting Length, 1/4″ Shank Diameter, 2″ Length - The z-carb family of end mills are the first and original variable geometry end mill that changed the entire industry. By drastically reducing chatter, increasing tool life and optimizing cost savings, the z-carb changed the way we machine forever. The z-carb family of end mills maximizes stock removal and improves productivity in most milling applications.

 

SGS 31958 3EL 2 Flute Square End General Purpose End Mill Aluminum Titanium Nitride Coating 18 Cutting Diameter 1 Cutting Length 18 Shank Diameter 3 Length

SGS 31958 3EL 2 Flute Square End General Purpose End Mill, Aluminum Titanium Nitride Coating, 1/8″ Cutting Diameter, 1″ Cutting Length, 1/8″ Shank Diameter, 3″ Length

SGS 31958 3EL 2 Flute Square End General Purpose End Mill, Aluminum Titanium Nitride Coating, 1/8″ Cutting Diameter, 1″ Cutting Length, 1/8″ Shank Diameter, 3″ Length - Sgs general purpose end mills are manufactured to the highest standards on state of the art cnc equipment. Held to the same standard as high performance product, the sgs general purpose end mill delivers consistent dependable performance beyond a typical general purpose end mill.

 

SGS 32678 55 V-Carb High Performance 5 Flute End Mill Aluminum Titanium Nitride Coating 12 Cutting Diameter 58 Cutting Length 12 Shank Diameter 2-12 Length

SGS 32678 55 V-Carb High Performance 5 Flute End Mill, Aluminum Titanium Nitride Coating, 1/2″ Cutting Diameter, 5/8″ Cutting Length, 1/2″ Shank Diameter, 2-1/2″ Length

SGS 32678 55 V-Carb High Performance 5 Flute End Mill, Aluminum Titanium Nitride Coating, 1/2″ Cutting Diameter, 5/8″ Cutting Length, 1/2″ Shank Diameter, 2-1/2″ Length - However, the chatter suppressing design allows you to push the tool well beyond the limits of light finishing cuts. The geometry produces superior surface finishes in ferrous materials with a high level of accuracy needed for semi-finishing and finishing of components. The v-carb end mill is the finishing touch that you can expect more from. Tackle a range of applications with this tool.

 

SGS 36404 Z1 Z-Carb High Performance End Mill Aluminum Titanium Nitride Coating 18 Cutting Diameter 38 Cutting Length 18 Shank Diameter 1-12 Length

SGS 36404 Z1 Z-Carb High Performance End Mill, Aluminum Titanium Nitride Coating, 1/8″ Cutting Diameter, 3/8″ Cutting Length, 1/8″ Shank Diameter, 1-1/2″ Length

SGS 36404 Z1 Z-Carb High Performance End Mill, Aluminum Titanium Nitride Coating, 1/8″ Cutting Diameter, 3/8″ Cutting Length, 1/8″ Shank Diameter, 1-1/2″ Length - The z-carb family of end mills are the first and original variable geometry end mill that changed the entire industry. The z-carb family of end mills maximizes stock removal and improves productivity in most milling applications. By drastically reducing chatter, increasing tool life and optimizing cost savings, the z-carb changed the way we machine forever.

 

SGS 31850 3L 2 Flute Square End General Purpose End Mill Aluminum Titanium Nitride Coating 18 Cutting Diameter 34 Cutting Length 18 Shank Diameter 2-14 Length

SGS 31850 3L 2 Flute Square End General Purpose End Mill, Aluminum Titanium Nitride Coating, 1/8″ Cutting Diameter, 3/4″ Cutting Length, 1/8″ Shank Diameter, 2-1/4″ Length

SGS 31850 3L 2 Flute Square End General Purpose End Mill, Aluminum Titanium Nitride Coating, 1/8″ Cutting Diameter, 3/4″ Cutting Length, 1/8″ Shank Diameter, 2-1/4″ Length - Held to the same standard as high performance product, the sgs general purpose end mill delivers consistent dependable performance beyond a typical general purpose end mill. Sgs general purpose end mills are manufactured to the highest standards on state of the art cnc equipment.

 

SGS 32658 55 V-Carb High Performance 5 Flute End Mill Aluminum Titanium Nitride Coating 732 Cutting Diameter 34 Cutting Length 14 Shank Diameter 2-12 Length

SGS 32658 55 V-Carb High Performance 5 Flute End Mill, Aluminum Titanium Nitride Coating, 7/32″ Cutting Diameter, 3/4″ Cutting Length, 1/4″ Shank Diameter, 2-1/2″ Length

SGS 32658 55 V-Carb High Performance 5 Flute End Mill, Aluminum Titanium Nitride Coating, 7/32″ Cutting Diameter, 3/4″ Cutting Length, 1/4″ Shank Diameter, 2-1/2″ Length - Tackle a range of applications with this tool. However, the chatter suppressing design allows you to push the tool well beyond the limits of light finishing cuts. The geometry produces superior surface finishes in ferrous materials with a high level of accuracy needed for semi-finishing and finishing of components. The v-carb end mill is the finishing touch that you can expect more from.

 

SGS 36505 Z16CR Z-Carb High Performance End Mill Aluminum Titanium Nitride Coating 18 Cutting Diameter 14 Cutting Length 18 Shank Diameter 1-12 Length

SGS 36505 Z16CR Z-Carb High Performance End Mill, Aluminum Titanium Nitride Coating, 1/8″ Cutting Diameter, 1/4″ Cutting Length, 1/8″ Shank Diameter, 1-1/2″ Length

SGS 36505 Z16CR Z-Carb High Performance End Mill, Aluminum Titanium Nitride Coating, 1/8″ Cutting Diameter, 1/4″ Cutting Length, 1/8″ Shank Diameter, 1-1/2″ Length - The z-carb family of end mills maximizes stock removal and improves productivity in most milling applications. The z-carb family of end mills are the first and original variable geometry end mill that changed the entire industry. By drastically reducing chatter, increasing tool life and optimizing cost savings, the z-carb changed the way we machine forever.

 

SGS 32616 55CR V-Carb High Performance 5 Flute End Mill Aluminum Titanium Nitride Coating 14 Cutting Diameter 1-14 Cutting Length 14 Shank Diameter 4 Length

SGS 32616 55CR V-Carb High Performance 5 Flute End Mill, Aluminum Titanium Nitride Coating, 1/4″ Cutting Diameter, 1-1/4″ Cutting Length, 1/4″ Shank Diameter, 4″ Length

SGS 32616 55CR V-Carb High Performance 5 Flute End Mill, Aluminum Titanium Nitride Coating, 1/4″ Cutting Diameter, 1-1/4″ Cutting Length, 1/4″ Shank Diameter, 4″ Length - The v-carb end mill is the finishing touch that you can expect more from. However, the chatter suppressing design allows you to push the tool well beyond the limits of light finishing cuts. The geometry produces superior surface finishes in ferrous materials with a high level of accuracy needed for semi-finishing and finishing of components. Tackle a range of applications with this tool. .

 

SGS 39331 3 2 Flute Square End General Purpose End Mill Titanium Nitride Coating 14 Cutting Diameter 34 Cutting Length 14 Shank Diameter 2-12 Length

SGS 39331 3 2 Flute Square End General Purpose End Mill, Titanium Nitride Coating, 1/4″ Cutting Diameter, 3/4″ Cutting Length, 1/4″ Shank Diameter, 2-1/2″ Length

SGS 39331 3 2 Flute Square End General Purpose End Mill, Titanium Nitride Coating, 1/4″ Cutting Diameter, 3/4″ Cutting Length, 1/4″ Shank Diameter, 2-1/2″ Length - Held to the same standard as high performance product, the sgs general purpose end mill delivers consistent dependable performance beyond a typical general purpose end mill. . Sgs general purpose end mills are manufactured to the highest standards on state of the art cnc equipment.

 

SGS 56160 106 Straight Flute Drills Aluminum Titanium Nitride Coating 04375 Cutting Diameter 2-116 Cutting Length 3-716 Length

SGS 56160 106 Straight Flute Drills, Aluminum Titanium Nitride Coating, 0.4375″ Cutting Diameter, 2-1/16″ Cutting Length, 3-7/16″ Length

SGS 56160 106 Straight Flute Drills, Aluminum Titanium Nitride Coating, 0.4375″ Cutting Diameter, 2-1/16″ Cutting Length, 3-7/16″ Length - The heavy flute and neutral construction make it ideal for short chipping materials that quickly wear drills with a helix. . This high strength design is ideal for hard materials and extremely abrasive materials.

 

SGS 32570 55CR V-Carb High Performance 5 Flute End Mill Aluminum Titanium Nitride Coating 58 Cutting Diameter 2-12 Cutting Length 58 Shank Diameter 5 Length 0030 Corner Radius

SGS 32570 55CR V-Carb High Performance 5 Flute End Mill, Aluminum Titanium Nitride Coating, 5/8″ Cutting Diameter, 2-1/2″ Cutting Length, 5/8″ Shank Diameter, 5″ Length, 0.030″ Corner Radius

SGS 32570 55CR V-Carb High Performance 5 Flute End Mill, Aluminum Titanium Nitride Coating, 5/8″ Cutting Diameter, 2-1/2″ Cutting Length, 5/8″ Shank Diameter, 5″ Length, 0.030″ Corner Radius - Tackle a range of applications with this tool. However, the chatter suppressing design allows you to push the tool well beyond the limits of light finishing cuts. The geometry produces superior surface finishes in ferrous materials with a high level of accuracy needed for semi-finishing and finishing of components. The v-carb end mill is the finishing touch that you can expect more from.

 

SGS 31970 3ELB 2 Flute Ball End General Purpose End Mill Titanium Nitride Coating 14 Cutting Diameter 1-12 Cutting Length 14 Shank Diameter 4 Length

SGS 31970 3ELB 2 Flute Ball End General Purpose End Mill, Titanium Nitride Coating, 1/4″ Cutting Diameter, 1-1/2″ Cutting Length, 1/4″ Shank Diameter, 4″ Length

SGS 31970 3ELB 2 Flute Ball End General Purpose End Mill, Titanium Nitride Coating, 1/4″ Cutting Diameter, 1-1/2″ Cutting Length, 1/4″ Shank Diameter, 4″ Length - . Held to the same standard as high performance product, the sgs general purpose end mill delivers consistent dependable performance beyond a typical general purpose end mill. Sgs general purpose end mills are manufactured to the highest standards on state of the art cnc equipment.