Best Brass Fitting out of top 20

 

Anderson Metals Brass Tube Fitting 45 Degree Elbow 38 Flare x 14 Male Pipe

Anderson Metals Brass Tube Fitting, 45 Degree Elbow, 3/8″ Flare x 1/4″ Male Pipe

Anderson Metals Brass Tube Fitting, 45 Degree Elbow, 3/8″ Flare x 1/4″ Male Pipe - Resists mechanical pullout for a more secure connection. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the usa and its territories. 45-degree elbow for connecting two tubes at an angle. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Operating temperature range of -65 to +250 degrees f. Flared tube connection on one end and male npt connection on the other.

 

Anderson Metals 38116 Red Brass Pipe Fitting 90 Degree Street Elbow 34 Female x 34 Male

Anderson Metals 38116 Red Brass Pipe Fitting, 90 Degree Street Elbow, 3/4″ Female x 3/4″ Male

Anderson Metals 38116 Red Brass Pipe Fitting, 90 Degree Street Elbow, 3/4″ Female x 3/4″ Male - Red brass pipe fitting. 3/4-inches female x 3/4-inches male connection. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the usa and its territories. 90 degree street elbow.

 

MODONA Premium 72 6 Feet Stainless Steel SS304 Shower Hose with BRASS Fittings Satin Nickel - 5 Year Warrantee

MODONA Premium 72″ (6 Feet) Stainless Steel (SS304) Shower Hose with BRASS Fittings, Satin Nickel – 5 Year Warrantee

MODONA Premium 72″ (6 Feet) Stainless Steel (SS304) Shower Hose with BRASS Fittings, Satin Nickel – 5 Year Warrantee - Extra long 72″ (6 feet) premium stainless steel (ss304) shower hose, satin nickel. Trust all modona products are covered by our comprehensive 5 year warrantee contact us about any issue whatsoever and we will fix it immediately. Beautiful this hose is actually satin nickel plated, not just brushed stainless steel the ss304 is plated in an extra layer of satin nickel finish to match your other satin nickel accessories perfectly. Inner hose made of epdm rubber, highest quality material, much better than vinyl or rubber. Outer hose made of ss304, highest grade of stainless steel and satin nickel plated hose fittings are made of brass, much better than zinc or plastic.

 

Water Right 400 Series Polyurethane Slim Light Drinking Water Safe Garden Hose 50-Foot x 716-Inch Brass Fittings Olive Green USA Made

Water Right 400 Series Polyurethane Slim & Light Drinking Water Safe Garden Hose, 50-Foot x 7/16-Inch, Brass Fittings, Olive Green, USA Made

Water Right 400 Series Polyurethane Slim & Light Drinking Water Safe Garden Hose, 50-Foot x 7/16-Inch, Brass Fittings, Olive Green, USA Made - Nsf and fda certified polyurethane resin for safe drinking water tasteless and odorless as compared to pvc or vinyl hose. Flexible in all weather conditions from sub-freezing temperatures to running hot water up to 140 degrees fahrenheit. Soft, flexible, slim, lightweight, & effortless to use will not permanently kink. Contains no lead, bpa, phthalates or other toxic chemicals. Industrial grade brass chrome-plated, lead free fittings are long-lasting, non-tarnishing, & crush-resistant.

 

Dixon BAS974 Brass Fitting Swivel Adapter 34 GHT Female x 12 NPTF Female

Dixon BAS974 Brass Fitting, Swivel Adapter, 3/4″ GHT Female x 1/2″ NPTF Female

Dixon BAS974 Brass Fitting, Swivel Adapter, 3/4″ GHT Female x 1/2″ NPTF Female - This adapter is made of brass for resistance to corrosion, ductility at high temperatures, and low magnetic permeability. Dixon valve & coupling company manufactures pipe and hose fittings and accessories. Hose fittings are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation. The company, founded in 1916, is headquartered in chestertown, md. This dixon bas series brass swivel adapter has a female ght threaded end, female nptf threaded end, and connects hoses of different types. This fitting has a female garden hose threads (ght) to connect to a male ght connection and a female national pipe taper fine (nptf) threads to connect to a male nptf connection. Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications.

 

Forney 75361 Brass Fitting Barbed Hose Splicer 14-Inch to 14-Inch

Forney 75361 Brass Fitting, Barbed Hose Splicer, 1/4-Inch to 1/4-Inch

Forney 75361 Brass Fitting, Barbed Hose Splicer, 1/4-Inch to 1/4-Inch - Claims for warranty must be made within 90 days of the date of purchase. This warranty does not cover any product that has been subject to misuse, neglect, negligence or accident, or that has been used in any way contrary to the purpose intended. Use with hose clamps or ferrules. Barbed hose splicer for 1/4-inch (6. Founded in 1932, forney offers more than 5,000 products for the hardware, automotive, farm and ranch and do-it-yourself markets. Proof of purchase required. 35mm) hose. The forney 75361 barbed hose splicer for 1/4-inch x 1/4-inch hose is made of brass. Resists rust and will not corrode as easily as other materials. If you’ve got metal working questions, we’ve got answers. Forney industries is one of america’s longest operating family-owned metal working product companies. Were committed to your success regardless of location size or needs. 35mm) x 1/4-inch (6.

 

Erie Tools Pressure Washer Twist Connect M22 X 38 Quick Disconnect Plug 4500PSI High Pressure Brass Fitting 300°F Max Temp

Erie Tools Pressure Washer Twist Connect M22 X 3/8″ Quick Disconnect Plug 4500PSI High Pressure Brass Fitting 300°F Max Temp

Erie Tools Pressure Washer Twist Connect M22 X 3/8″ Quick Disconnect Plug 4500PSI High Pressure Brass Fitting 300°F Max Temp - Erie tools® pressure washer twist connect m22 x 3/8″ quick disconnect plug 4500psi high pressure brass fitting 300°f max tempm22 high pressure swivel nut plated steel coupler fitting inlet 3/8″ npt quick disconnect plug4500 max psimax temp 300°f.

 

Anderson Metals Brass Hose Fitting Tee 38 x 38 x 38 Barb

Anderson Metals Brass Hose Fitting, Tee, 3/8″ x 3/8″ x 3/8″ Barb

Anderson Metals Brass Hose Fitting, Tee, 3/8″ x 3/8″ x 3/8″ Barb - Fitting connects to hose on all ends. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the usa and its territories. For use with plastic or rubber hose. Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately). Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Branch tee to connect hose.

 

Eaton Weatherhead 1072X6 Brass CA360 Mini-Barb Brass Fitting Branch Tee 38 Tube OD x 14 NPT Male

Eaton Weatherhead 1072X6 Brass CA360 Mini-Barb Brass Fitting, Branch Tee, 3/8″ Tube OD x 1/4″ NPT Male

Eaton Weatherhead 1072X6 Brass CA360 Mini-Barb Brass Fitting, Branch Tee, 3/8″ Tube OD x 1/4″ NPT Male - Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. Eaton manufactures electrical, hydraulic, and mechanical power equipment. Hose fittings are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation. The company, founded in 1911, is headquartered in dublin, ireland. Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications.

 

Interstate Pneumatics F7327-50 Brass Fitting Hose Ferrule 0625 inch Inner Diameter x 10 inch Pack of 50

Interstate Pneumatics F7327-50 Brass Fitting Hose Ferrule 0.625 inch Inner Diameter x 1.0 inch Pack of 50

Interstate Pneumatics F7327-50 Brass Fitting Hose Ferrule 0.625 inch Inner Diameter x 1.0 inch Pack of 50 - . These brass ferrules are annealed for ease of crimping and they are brightened and lacquered so that product does not lose color, luster especially by exposure to air, dust and dirt in the machine or on the shelf. Economical and dependable brass ferrules enable you to make up custom hose assemblies.

 

Swanson TS149 9-Inch Sliding T-Bevel with Hardwood Handle Stainless Steel Blade and Brass Fittings

Swanson TS149 9-Inch Sliding T-Bevel with Hardwood Handle, Stainless Steel Blade and Brass Fittings

Swanson TS149 9-Inch Sliding T-Bevel with Hardwood Handle, Stainless Steel Blade and Brass Fittings - Hardwood handle. Brass bound ends. Etched stainless steel 9″ blade.

 

Eaton Weatherhead 431X4 Brass CA360 Inverted Flare Brass Fitting 90 Degree Elbow 18 NPT Male x 14 Tube OD

Eaton Weatherhead 431X4 Brass CA360 Inverted Flare Brass Fitting, 90 Degree Elbow, 1/8″ NPT Male x 1/4″ Tube OD

Eaton Weatherhead 431X4 Brass CA360 Inverted Flare Brass Fitting, 90 Degree Elbow, 1/8″ NPT Male x 1/4″ Tube OD - 90-degree inverted flare elbow fitting for joining a pipe to a tube at a 90-degree angle in a range of fluid transfer applications. Meets sae 040202 specifications for tube fittings. Operating temperature range of -65 to +250 degrees f (-53 to +121 degrees c). 1/8″ male npt threads on one end and 5/16-28 female sae inverted flare threads on the other for use with 1/4″ od tubes. Ca360 brass for strength and resistance to corrosion.

 

Anderson Metals Red Brass Pipe Fitting Nipple 12 x 12 Male Pipe 1-18 Length

Anderson Metals Red Brass Pipe Fitting, Nipple, 1/2″ x 1/2″ Male Pipe, 1-1/8″ Length

Anderson Metals Red Brass Pipe Fitting, Nipple, 1/2″ x 1/2″ Male Pipe, 1-1/8″ Length - Meets specifications astm b584 and asme/ansi b16 for quality assurance. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the usa and its territories. Nipple for connecting two threaded pipes. Red brass for high strength, ease of machining, and better corrosion resistance than stainless steel. Male national pipe taper (npt) threads for connecting to female threaded pipes. Operating temperatures range from -53 to 121 degrees c (-65 to 250 degrees f).

 

Forney 75360 Brass Fitting Barbed Hose End 14-Inch Barbed Hose End-by-14-Inch Male NPT Hose End

Forney 75360 Brass Fitting, Barbed Hose End, 1/4-Inch Barbed Hose End-by-1/4-Inch Male NPT Hose End

Forney 75360 Brass Fitting, Barbed Hose End, 1/4-Inch Barbed Hose End-by-1/4-Inch Male NPT Hose End - The forney 75360 1/4-inch male npt barbed hose end for 1/4-inch hose is made of brass. 35mm) hose. Use with hose clamps or ferrules. If you’ve got metal working questions, we’ve got answers. Claims for warranty must be made within 90 days of the date of purchase. Forney industries is one of america’s longest operating family-owned metal working product companies. Were committed to your success regardless of location size or needs. 35mm) male npt barbed hose end for 1/4-inch (6. Resists rust and will not corrode as easily as other materials. This warranty does not cover any product that has been subject to misuse, neglect, negligence or accident, or that has been used in any way contrary to the purpose intended. Founded in 1932, forney offers more than 5,000 products for the hardware, automotive, farm and ranch and do-it-yourself markets. Proof of purchase required. . 1/4-inch (6.

 

Forney 75535 Brass Fitting Bushing 14-Inch Female to 38-Inch Male NPT

Forney 75535 Brass Fitting, Bushing, 1/4-Inch Female to 3/8-Inch Male NPT

Forney 75535 Brass Fitting, Bushing, 1/4-Inch Female to 3/8-Inch Male NPT - If you’ve got metal working questions, we’ve got answers. Were committed to your success regardless of location size or needs. This warranty does not cover any product that has been subject to misuse, neglect, negligence or accident, or that has been used in any way contrary to the purpose intended. Resists rust and will not corrode as easily as other materials. 35mm) x 3/8-inch (9. Claims for warranty must be made within 90 days of the date of purchase. 53mm) male npt. Founded in 1932, forney offers more than 5,000 products for the hardware, automotive, farm and ranch and do-it-yourself markets. Bushing female npt 1/4-inch (6. The forney 75535 bushing female npt 1/4-inch x 3/8-inch male npt is an all brass air hose bushing. Proof of purchase required. Forney industries is one of americas longest operating family-owned metal working product companies.

 

PowRyte 5000930 Basic Solid Brass Fitting Male Coupling Set 14 NPT x 14 NPT 2 Piece

PowRyte 5000930 Basic Solid Brass Fitting, Male Coupling Set, 1/4″ NPT x 1/4″ NPT, 2 Piece

PowRyte 5000930 Basic Solid Brass Fitting, Male Coupling Set, 1/4″ NPT x 1/4″ NPT, 2 Piece - They are made of a solid brass and are durable and resistant to corrosion. Description powryte 500093 basic solid brass air fittings, male coupling set is used for connecting to various pipes, airlines, air hoses, air tools and air compressor. Specification air inlet size      1/4-inch npt female thread material            brass. The coupling features two 1/4′-18npt male thread on both ends for connecting two 1/4″ female npt threaded pneumatic parts together. It is interchangeable with most air tool fittings. Teflon tape must be used with all fittings to achieve maximum performance. The hex design is perfect for easy wrench installations. These couplings are also called brass pipe fittings, brass air line fittings, quick connect air hose fittings, air tool fittings or air compressor fittings.

 

Anderson Metals Brass Tube Fitting Union 38 x 38 Flare

Anderson Metals Brass Tube Fitting, Union, 3/8″ x 3/8″ Flare

Anderson Metals Brass Tube Fitting, Union, 3/8″ x 3/8″ Flare - These fittings contain lead and are not allowed by federal law to be installed for potable water use in the usa and its territories. Operating temperatures range from -65 to 250 degrees f. Suitable for copper, brass, aluminum, and steel tubing. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Union for connecting and disconnecting two pipes more easily than couplings. This fitting has a 45-degree flare connection on both ends.

 

Eaton Weatherhead 402X2 Brass CA360 Inverted Flare Brass Fitting 90 Degree Elbow 18 NPT Male x 18 Tube OD

Eaton Weatherhead 402X2 Brass CA360 Inverted Flare Brass Fitting, 90 Degree Elbow, 1/8″ NPT Male x 1/8″ Tube OD

Eaton Weatherhead 402X2 Brass CA360 Inverted Flare Brass Fitting, 90 Degree Elbow, 1/8″ NPT Male x 1/8″ Tube OD - Eaton manufactures electrical, hydraulic, and mechanical power equipment. Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications. Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. Hose fittings are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation. The company, founded in 1911, is headquartered in dublin, ireland. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear.

 

Dixon 504-1212 Brass Fitting Adapter GHT Female Swivel x 34 NPTF Male

Dixon 504-1212 Brass Fitting, Adapter, GHT Female Swivel x 3/4″ NPTF Male

Dixon 504-1212 Brass Fitting, Adapter, GHT Female Swivel x 3/4″ NPTF Male - The company, founded in 1916, is headquartered in chestertown, md. This dixon 504-1208 brass swivel hose fitting has a 3/4″ male national pipe taper fuel (nptf) threaded connection and a female garden hose thread (ght) threaded connection. Dixon valve & coupling company manufactures pipe and hose fittings and accessories. The nptf connection provides a reliable seal and the swivel fitting allows in-place connection. Hose fittings are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation. This fitting is suitable for use in water service applications. Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. The brass construction provides corrosion resistance, ductility at high temperatures, and low magnetic permeability. Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications.

 

Dixon BA796 Brass Fitting Adapter 34 GHT Male x 34 NPTF Female

Dixon BA796 Brass Fitting, Adapter, 3/4″ GHT Male x 3/4″ NPTF Female

Dixon BA796 Brass Fitting, Adapter, 3/4″ GHT Male x 3/4″ NPTF Female - Hose fittings have various types of connections, including threaded, barbed, push-to-connect, dry disconnect, and others including those based on internationally-accepted specifications. Hose fittings are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation. This adapter is made of brass for resistance to corrosion, ductility at high temperatures, and low magnetic permeability. Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. Dixon valve & coupling company manufactures pipe and hose fittings and accessories. This fitting has male garden hose threads (ght) to connect to a female ght connection and a female national pipe taper fine (nptf) threads to connect to a male nptf connection for a tighter seal than straight threads. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. The company, founded in 1916, is headquartered in chestertown, md. This dixon ba series brass adapter has a male ght threaded end, nptf threaded end, and connects hoses or fittings of different types.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.