Best Scroll Chuck out of top 18

 

BISON 3 Jaw Self-Centering Scroll Chuck - CHUCK SIZE 8 Tool Material Universal Semi-Steel

BISON 3 Jaw Self-Centering Scroll Chuck – CHUCK SIZE: 8″ Tool Material: Universal Semi-Steel

BISON 3 Jaw Self-Centering Scroll Chuck – CHUCK SIZE: 8″ Tool Material: Universal Semi-Steel - Body is made of high quality cast iron. Scroll plate is drop-forged of fine alloy steel, hardened and ground. Pinions are hardened and ground. Jaw teeth and guides are hardened and fully ground on both sides.

 

34 X 16 TPI Insert for Oneway Scroll Chuck System

3/4″ X 16 TPI Insert for Oneway Scroll Chuck System

3/4″ X 16 TPI Insert for Oneway Scroll Chuck System - . Allows you to mount a oneway scroll chuck (#22719, sold separately) or talon chuck (#20761, sold separately) to a lathe with a 3/4″ x 16 tpi drive spindle.

 

Jumbo Jaws for Oneway Scroll Chuck System

Jumbo Jaws for Oneway Scroll Chuck System

Jumbo Jaws for Oneway Scroll Chuck System - When mounted on the oneway scroll chuck (#22719, sold separately) or the talon chuck (#20761, sold separately), the machined solid aluminum plates of the jumbo jaws form a plate 11″ in diameter. With the rubber grippers and the combination of slots and tapped holes machined in the solid aluminum plates, the jumbo jaws can hold an infinite number of round, oval or square shapes.

 

BISON 2 Jaw Self-Centering Scroll Chuck - Number OF JAWS 2 CHUCK SIZE 10

BISON 2 Jaw Self-Centering Scroll Chuck – Number OF JAWS: 2 CHUCK SIZE: 10″

BISON 2 Jaw Self-Centering Scroll Chuck – Number OF JAWS: 2 CHUCK SIZE: 10″ - Hardened and ground scroll & master jaws. Universal 2 jaw scroll lathe chucks with two-piece reversible tongue and groove jaws. Semi-steel body.

 

BISON 3 Jaw Self-Centering Scroll Chuck - CHUCK SIZE 6 Tool Material Universal Semi-Steel

BISON 3 Jaw Self-Centering Scroll Chuck – CHUCK SIZE: 6″ Tool Material: Universal Semi-Steel

BISON 3 Jaw Self-Centering Scroll Chuck – CHUCK SIZE: 6″ Tool Material: Universal Semi-Steel - Pinions are hardened and ground. Body is made of high quality cast iron. Jaw teeth and guides are hardened and fully ground on both sides. Scroll plate is drop-forged of fine alloy steel, hardened and ground.

 

South Bend Lathe SB1352 5-Inch 3-Jaw D1-3 Scroll Chuck

South Bend Lathe SB1352 5-Inch 3-Jaw D1-3 Scroll Chuck

South Bend Lathe SB1352 5-Inch 3-Jaw D1-3 Scroll Chuck - Supplied with all the hardware for mounting on your lathe. D1 camlock mount. 5-inch 3-jaw scroll chuck d1.

 

TTC Mini Scroll Chuck with Shank - CHUCK SIZE 2 Tool Material Universal Semi-Steel Shank 1 MT

TTC Mini Scroll Chuck with Shank – CHUCK SIZE: 2″ Tool Material: Universal Semi-Steel Shank: 1 MT

TTC Mini Scroll Chuck with Shank – CHUCK SIZE: 2″ Tool Material: Universal Semi-Steel Shank: 1 MT - Provided with (2) keys. Medium duty type. Chucks are threaded back scroll, self centering type.

 

South Bend Lathe SB1308 7-Inch 3-Jaw Plain Back Scroll Chuck

South Bend Lathe SB1308 7-Inch 3-Jaw Plain Back Scroll Chuck

South Bend Lathe SB1308 7-Inch 3-Jaw Plain Back Scroll Chuck - Top quality chucks made for high precision work and made with tight tolerances. These south bend lathe chucks are amongst the best available on the market. High precision 3 jaw scroll shucks with 2 piece jaws and plain backs.

 

South Bend Lathe SB1234 7-Inch 4-Jaw Plain Back Scroll Chuck

South Bend Lathe SB1234 7-Inch 4-Jaw Plain Back Scroll Chuck

South Bend Lathe SB1234 7-Inch 4-Jaw Plain Back Scroll Chuck - Absolute top quality chucks made for high precision work and made with tight tolerances to satisfy the most demanding machines out there. High precision cast iron 4-jaw scroll chuck with 2 piece jaws and plain backs. These south bend lathe chucks are amongst the best available on the market.

 

South Bend Lathe SB1222 10-Inch 3-Jaw D1-6 Scroll Chuck

South Bend Lathe SB1222 10-Inch 3-Jaw D1-6 Scroll Chuck

South Bend Lathe SB1222 10-Inch 3-Jaw D1-6 Scroll Chuck - Absolute top quality chucks made for high precision work and made with tight tolerances to satisfy the most demanding machinists out there. Supplied with all the hardware for mounting on your lathe. These south bend lathe chucks are amongst the best available on the market.

 

Oneway Scroll Chuck System

Oneway Scroll Chuck System

Oneway Scroll Chuck System - Different jaw sets are available for the chuck, which allows you to fit the chuck to suit your specific needs. Chucks were designed to meet most turning needs. Large projects can be turned more safely, and turning can be done at the ends of long stock. This design creates a constant differential which allows one-handed tightening. 2 levers plus 4 holes in body, 3 in the scroll gives you 1-handed tightening oneway chucks have been designed by a machinist with engineering input from material, heat treating, and plating specialists in order to satisfy the woodturner’s every need. Levers are made from high strength steel and will not deform or bend in use. This prevents damage to holes in the chuck. If your needs change or grow, these chucks can be adapted to change and grow as you do. Less time spent getting ready to turn and more time spent turning means better quality, and more finished projects. This chuck requires an insert, you can use 3/4″ x 16 tpi insert (#22733 sold separately) 1″ x 8 tpi insert (#22726 sold separately) 1-1/4” x 8 tpi insert (#21358 sold separately). There are four lever holes in the body, and three holes in the scroll.

 

South Bend Lathe SB1311 10-Inch 3-Jaw Plain Back Scroll Chuck

South Bend Lathe SB1311 10-Inch 3-Jaw Plain Back Scroll Chuck

South Bend Lathe SB1311 10-Inch 3-Jaw Plain Back Scroll Chuck - These south bend lathe chucks are amongst the best available on the market. Top quality chucks made for high precision work and made with tight tolerances. High precision 3 jaw scroll shucks with 2 piece jaws and plain backs.

 

Gator 1-105-0800 3 Jaw Self-Centering Scroll Chuck - CHUCK SIZE 8 Tool Material Precision Forged-Steel 1-105-0800

Gator 1-105-0800 3 Jaw Self-Centering Scroll Chuck – CHUCK SIZE: 8″ Tool Material: Precision Forged-Steel 1-105-0800

Gator 1-105-0800 3 Jaw Self-Centering Scroll Chuck – CHUCK SIZE: 8″ Tool Material: Precision Forged-Steel 1-105-0800 - Bushings are hardened and ground, pressed into the pinion seats. 1 year warranty. Jaws, pinions and bushings are made of fine alloy steel. Featuresjaw teeth and guides are hardened and fully ground on both sides. Universal semi-steel bodybody is made of high quality cast iron. (1) set of mounting screws. (1) wrench. Hard top jaws and hard master jaws. Pinions are hardened and ground. Precision forged-steel bodylasts at least 2 times longer than universal semi-steel chucks. Body is drop-forged of highest grade steel. Includes(1) set of two-piece reversible jaws. Scroll plate is drop-forged of fine alloy steel, hardened and ground. 2 year warranty.

 

BISON 3 Jaw Self-Centering Scroll Chuck - CHUCK SIZE 5 Tool Material Universal Semi-Steel

BISON 3 Jaw Self-Centering Scroll Chuck – CHUCK SIZE: 5″ Tool Material: Universal Semi-Steel

BISON 3 Jaw Self-Centering Scroll Chuck – CHUCK SIZE: 5″ Tool Material: Universal Semi-Steel - Scroll plate is drop-forged of fine alloy steel, hardened and ground. Pinions are hardened and ground. Body is made of high quality cast iron. Jaw teeth and guides are hardened and fully ground on both sides.

 

BISON 3 Jaw Self-Centering Scroll Chuck - CHUCK SIZE 8 Tool Material Precision Forged-Steel

BISON 3 Jaw Self-Centering Scroll Chuck – CHUCK SIZE: 8″ Tool Material: Precision Forged-Steel

BISON 3 Jaw Self-Centering Scroll Chuck – CHUCK SIZE: 8″ Tool Material: Precision Forged-Steel - Lasts at least 2 times longer than universal semi-steel chucks. Jaws, pinions and bushings are made of fine alloy steel. Bushings are hardened and ground, pressed into the pinion seats. Body is drop-forged of highest grade steel.

 

TTC Mini Scroll Chuck with Shank - CHUCK SIZE 2 Tool Material Universal Semi-Steel Shank 2 MT

TTC Mini Scroll Chuck with Shank – CHUCK SIZE: 2″ Tool Material: Universal Semi-Steel Shank: 2 MT

TTC Mini Scroll Chuck with Shank – CHUCK SIZE: 2″ Tool Material: Universal Semi-Steel Shank: 2 MT - Medium duty type. Provided with (2) keys. Chucks are threaded back scroll, self centering type.

 

BISON Self-Centering Scroll Chuck - CHUCK SIZE 5 Tool Material

BISON Self-Centering Scroll Chuck – CHUCK SIZE: 5″ Tool Material:

BISON Self-Centering Scroll Chuck – CHUCK SIZE: 5″ Tool Material: - Universal 3 jaw scroll lathe chucks with two-piece hard reversible jaws. Can be mounted directly on 3 & 6 t-slot rotary tables. Use with rotary tables and other devices where back mounting chucks cannot be used.

 

3 Jaws for Oneway Scroll Chuck System

#3 Jaws for Oneway Scroll Chuck System

#3 Jaws for Oneway Scroll Chuck System - . They are unparalleled in strength and holding capacity. These jaws fit the oneway scroll chuck (#22719, sold separately) and talon chuck (#20761, sold separately) and have the mass and size necessary for turning larger bowls and vases. The #3 jaws have also been outfitted with oneway’s patented profiled jaw design.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.