Coolest 20 Straight Router Bits

 

Freud 12-100 14-Inch Diameter by 34-Inch Double Flute Straight Router Bit with 12-Inch Shank

Freud 12-100 1/4-Inch Diameter by 3/4-Inch Double Flute Straight Router Bit with 1/2-Inch Shank

Freud 12-100 1/4-Inch Diameter by 3/4-Inch Double Flute Straight Router Bit with 1/2-Inch Shank - Covered by freud’s limited lifetime warranty. Kickback reducing design. Precision ground for the smoothest cuts. Individually computer balanced.

 

uxcell Woodworking 14 Shank 12 Cutting Dia Double Flute Straight Router Bit

uxcell Woodworking 1/4″ Shank 1/2″ Cutting Dia Double Flute Straight Router Bit

uxcell Woodworking 1/4″ Shank 1/2″ Cutting Dia Double Flute Straight Router Bit - Total length 69mm/ 272″material metal. Package content 1 x straight router bit, 1 x plastic case. Bit diameter 127mm/ 1/2″flute length 325mm/ 128″. Product name router bittype straight type double fluteshank diameter 64mm/ 1/4″. Color silver tone, greennet weight ( not include case) 21g.

 

Freud 12-138 58-Inch Diameter by 1-14-Inch Double Flute Straight Router Bit

Freud 12-138 5/8-Inch Diameter by 1-1/4-Inch Double Flute Straight Router Bit

Freud 12-138 5/8-Inch Diameter by 1-1/4-Inch Double Flute Straight Router Bit - Freud’s precision ground carbide bits have a grain size smaller than other grades, and titanium is added making them impervious to chemical attack. Cut diameter 5/8-inch, cut length 1-1/4-inch, shank diameter-1/2-inch. Bits are computer balanced to insure vibration-free operation at speeds that are a safe margin above the typical 22,000 rpms of most routers. Promoting safer woodworking is the reason freud made a commitment to develop anti-kickback router bits. Freud’s philosophy is woodworkers should expect safety, not pay for it.

 

Bosch 85227M 12-Inch Diameter 1-Inch Cut Carbide Tipped Double Flute Straight Router Bit 14-Inch Shank

Bosch 85227M 1/2-Inch Diameter 1-Inch Cut Carbide Tipped Double Flute Straight Router Bit 1/4-Inch Shank

Bosch 85227M 1/2-Inch Diameter 1-Inch Cut Carbide Tipped Double Flute Straight Router Bit 1/4-Inch Shank - All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router. Recommended for use with a routing table.

 

Yonico 14150 Straight Router Bit with 12-Inch X 2-Inch Length 12-Inch Shank

Yonico 14150 Straight Router Bit with 1/2-Inch X 2-Inch Length 1/2-Inch Shank

Yonico 14150 Straight Router Bit with 1/2-Inch X 2-Inch Length 1/2-Inch Shank - Satisfaction guaranteed and lifetime warranty. C3 micro-grain tungsten carbide cutters. Solid hardened steel bodies with anti-kickback design. Industrial quality router bits. Build-up & heat resistant teflon coating. Satisfaction guaranteed & lifetime warranty. Build-up and heat resistant teflon coating.

 

Dremel TR750 3-Piece Straight Router Bit Kit

Dremel TR750 3-Piece Straight Router Bit Kit

Dremel TR750 3-Piece Straight Router Bit Kit - Answer 1 request from end users, offer a larger variety of profiles for routing applications. Designed to fit the dremel trio tool only, cut straight grooves, rabbets, dadoes or level recessed areas. Bits include dremel logo, model number, and size laser etched onto shank. Kit includes 3 straight router bits (1/8-inch, 1/4-inch, and 1/2-inch profiles). Premium carbide bits for long lasting accessory life.

 

uxcell 14-inch Dia by 20mm Depth Double Flutes CNC Straight Router Bit with 12-inch Shank

uxcell 1/4-inch Dia by 20mm Depth Double Flutes CNC Straight Router Bit with 1/2-inch Shank

uxcell 1/4-inch Dia by 20mm Depth Double Flutes CNC Straight Router Bit with 1/2-inch Shank - Industrial quality router bit. Precision ground for the smoothest cuts. Kickback reducing design individually computer balanced. Use on cnc and other automatic routers as well as hand held and table mounted portable routers. Cuts all composite materials, plywoods, hardwoods, and softwoods.

 

Bosch 85251M 12-Inch Diameter 2-Inch Cut Carbide Tipped Double Flute Straight Router Bit 12-Inch Shank

Bosch 85251M 1/2-Inch Diameter 2-Inch Cut Carbide Tipped Double Flute Straight Router Bit 1/2-Inch Shank

Bosch 85251M 1/2-Inch Diameter 2-Inch Cut Carbide Tipped Double Flute Straight Router Bit 1/2-Inch Shank - -End shape cutting end. 114-85251m features -designed to give excellent smoothness of cut and balanced cutting, with minimal vibration. -Cutting edge material carbide-tipped. -Strong webbing and heavy cutter backing gives superior life. -Positive hook angles for efficient cutting. -Specially designed tip for fast plunge cutting. -Tool shape straight. -Quantity 1 per pack.

 

uxcell 12-Inch Shank Dia 3-Inch Flute Length Carbide Tipped 2-Flute Straight Router Bit Cutter

uxcell 1/2-Inch Shank Dia 3-Inch Flute Length Carbide Tipped 2-Flute Straight Router Bit Cutter

uxcell 1/2-Inch Shank Dia 3-Inch Flute Length Carbide Tipped 2-Flute Straight Router Bit Cutter - Weight 92g type straight shank double flutes standard 1/2″ x 1/2″. Cutting diameter 1/2″ color red,silver tone. Flute number 2 flute length 3″. Shank diameter 1/2″ product name straight router bit package content 1 x straight router bit, 1 x case. Material tungsten carbide overall length 121mm / 48″.

 

Bosch 85230MC 58-Inch Diameter 58-Inch Cut Carbide Tipped Double Flute Straight Router Bit 14-Inch Shank

Bosch 85230MC 5/8-Inch Diameter 5/8-Inch Cut Carbide Tipped Double Flute Straight Router Bit 1/4-Inch Shank

Bosch 85230MC 5/8-Inch Diameter 5/8-Inch Cut Carbide Tipped Double Flute Straight Router Bit 1/4-Inch Shank - All bits must be inserted in the full length of the collet be sure to use only router bits and accessories specifically designed for your router. Recommended for use with a routing table.

 

PORTER-CABLE 43704PC Straight Router Bit

PORTER-CABLE 43704PC Straight Router Bit

PORTER-CABLE 43704PC Straight Router Bit - Flute length 9/16-inch. All cutters fit 1/4-inch-28 threaded shanks. Cut capacity, width 1-inch. Designed for mortising of doors to accept locks, lock face plates, hinges, and for general stock removal.

 

CNBTR 14 Inch Shank Dia Silver Red Carbide Woodworking Straight Router Bit Set Pack of 7

CNBTR 1/4 Inch Shank Dia Silver & Red Carbide Woodworking Straight Router Bit Set Pack of 7

CNBTR 1/4 Inch Shank Dia Silver & Red Carbide Woodworking Straight Router Bit Set Pack of 7 - Cuts all composite materials, plywoods, hardwoods, and softwoods. Use on cnc and other automatic routers as well as hand-held and table-mounted portable routers. Safety instructions razor blades permanently enclosed in a cartridge or housing with less than 2mm of blade exposed the bladed product is not use for people under 18 years the item is only use for industrial cutting/engraving, not hazardous article. Sharp edge, high hardness, high frequency welding technology.

 

14 x 14 Woodworking Double Flutes Straight Router Bit Cutter 2pcs

1/4″ x 1/4″ Woodworking Double Flutes Straight Router Bit Cutter 2pcs

1/4″ x 1/4″ Woodworking Double Flutes Straight Router Bit Cutter 2pcs - . Also great for mortising and carving. Can be used to cut grooves, rabbets, slots, dadoes, joint making and general stock removal. Please pay attention to the size before ordering to avoid buying wrong item. Double fluted straight bit for sharp and long lasting cutting.

 

Freud 04-107 14-Inch Diameter by 78-Inch Double Flute Straight Router Bit with 14-Inch Shank

Freud 04-107 1/4-Inch Diameter by 7/8-Inch Double Flute Straight Router Bit with 1/4-Inch Shank

Freud 04-107 1/4-Inch Diameter by 7/8-Inch Double Flute Straight Router Bit with 1/4-Inch Shank - Kickback reducing design. Covered by freud’s limited lifetime warranty. Individually computer balanced. Precision ground for the smoothest cuts.

 

Carbide Tipped 2-Flute Straight Router Bits OD 12 Flute Length 1-18 Shank Dia 12 OAL 2-78 Bright in a Tube

Carbide Tipped 2-Flute Straight Router Bits; OD 1/2″; Flute Length 1-1/8″; Shank Dia 1/2″; OAL 2-7/8″; Bright; in a Tube

Carbide Tipped 2-Flute Straight Router Bits; OD 1/2″; Flute Length 1-1/8″; Shank Dia 1/2″; OAL 2-7/8″; Bright; in a Tube - Superior quality tool steel body with fine treatment. Superior quality carbide tips make tools outstanding wear resistance and extend tool life. Cuts all composition materials, plywood, hardwood, and soft wood. Use on hand-hold and table-mounted routers. Superior geometric and anti-kick design provides clean cuts.

 

Freud 12-156 34-Inch Diameter by 1-12-Inch Double Flute Straight Router Bit

Freud 12-156 3/4-Inch Diameter by 1-1/2-Inch Double Flute Straight Router Bit

Freud 12-156 3/4-Inch Diameter by 1-1/2-Inch Double Flute Straight Router Bit - Impervious to chemical attack. The product is manufactured in china. Easy to use. 3/4-inch diameter, 1-1/2-inch cut depth, 1/2-inch shank. Computer balanced for vibration free operation speeds over 22,000 rpm. Ground carbide with titanium for long life. Anti-kickback. The product is 3/4×1-1/2 strait bit.

 

PORTER-CABLE 43745PC  Hinge Mortising Straight Router Bit

PORTER-CABLE 43745PC Hinge Mortising Straight Router Bit

PORTER-CABLE 43745PC Hinge Mortising Straight Router Bit - Specifications cut capacity, width 1-1/4″, flute length 9/16″. The porter cable 43745pc 1-1/4″ hinge mortising cutter is designed for mortising of doors to accept locks, lock face plates, hinges, and for general stock removal. All cutters fit 1/4″, 28 threaded shanks.

 

Freud 04-130 12-Inch Diameter by 34-Inch Double Flute Straight Router Bit with 14-Inch Shank Size Model 04-130 Tools Home Improvement

Freud 04-130 1/2-Inch Diameter by 3/4-Inch Double Flute Straight Router Bit with 1/4-Inch Shank Size: Model: 04-130 Tools & Home Improvement

Freud 04-130 1/2-Inch Diameter by 3/4-Inch Double Flute Straight Router Bit with 1/4-Inch Shank Size: Model: 04-130 Tools & Home Improvement - Precise hook angle. Use on cnc and other automatic routers as well as hand-held and table-mounted portable routers. End of bit relief allows for fast plunging applicationcuts all composition materials, plywood, hardwood, and soft wood. .

 

Freud 03-140 14-Inch Diameter by 1-12-Inch Single Flute Straight Router Bit with 14-Inch Shank

Freud 03-140 1/4-Inch Diameter by 1-1/2-Inch Single Flute Straight Router Bit with 1/4-Inch Shank

Freud 03-140 1/4-Inch Diameter by 1-1/2-Inch Single Flute Straight Router Bit with 1/4-Inch Shank - Precision ground for the smoothest cuts. Individually computer balanced. Kickback reducing design. Covered by freud’s limited lifetime warranty.

 

Milescraft 2216 12-Inch Bearing Guided Straight Router Bit for Mortising

Milescraft 2216 1/2-Inch Bearing Guided Straight Router Bit for Mortising

Milescraft 2216 1/2-Inch Bearing Guided Straight Router Bit for Mortising - Bearing guided bit eliminates the need for guide bushings. 1/4 inch shank fits most collets. 1/2 inch straight for mortising and other router projects. Tungsten carbide tipped for long lasting durability. Replaces 1/2 inch bearing guided router bit that came with the door and hinge mortise kits.