Coolest 22 Woodworking Project Kits

 

Woodworking Project Kit for Zhen AUS-10 3 Layer Santoku Chopping Knife 675 L x 116 T

Woodworking Project Kit for Zhen AUS-10 (3 Layer) Santoku Chopping Knife, 6.75″ L x 1/16″ T

Woodworking Project Kit for Zhen AUS-10 (3 Layer) Santoku Chopping Knife, 6.75″ L x 1/16″ T - Designed for the chef at heart, these knives would make a great gift for the cook in your family. It also competes well with the higher-end steels, like ats-34 and above. Santoku chopping knife is excellent for slicing and downward push cuts. Blade length is 6-3/4″, with an overall length of 11-15/16″. Handle material sold separately. The best use of this knife however is for chopping by utilizing the deep belly of this knife allows for a beautiful rocking action making the chore of chopping a breeze. Zhen aus 10 knife kits are constructed from three layers of aus 10 steel (hrc59-61) forged together to form a refined grain structure that is more wear resistant, much tougher, and has the ability sharpen and maintain a keen edge. Aus-10 japanese stainless steel has roughly the same carbon content as 440c but with slightly less chromium, so it should be a bit less rust resistant but tougher than traditional 440c.

 

Woodworking Project Kit for Zhen High Carbon Steel Cheese Knife 475 L x 116 T

Woodworking Project Kit for Zhen High Carbon Steel Cheese Knife, 4.75″ L x 1/16″ T

Woodworking Project Kit for Zhen High Carbon Steel Cheese Knife, 4.75″ L x 1/16″ T - Handle material sold separately. Make your parties memorable with a zhen cheese knife that will impress your guests with the limitless possibilities available for knife handle material, whatever you choose will make your finished knife a show stopper. In addition, the open cavities of the blade help prevent foods from sticking. The added versatility of the sharpened fork ends allows you to pick up your favorite cheese or meat while keeping your fingers clean. This super sharp knife blade blank is constructed from 440c high carbon stainless steel, which increases its durability and prolongs the life of the knife, while improving its stain resistance. Blade length is 4-3/4″, with an overall length of 9-1/4″.

 

Woodworking Project Kit for Zhen Santoku Knife Blade Blank 4-1316L x 564T

Woodworking Project Kit for Zhen Santoku Knife, Blade Blank, 4-13/16″L x 5/64″T

Woodworking Project Kit for Zhen Santoku Knife, Blade Blank, 4-13/16″L x 5/64″T - Customize your knife blade by choosing from a myriad of woods to make the handle yourself. Vg, 10 steel core with a rockwell hardness of 60, 62. Maintains an extremely sharp edge for a long period of time. Knife blade blank only, handle must be made separately. Crafted from 66 layers of japanese damascus steel.

 

Woodworking Project Kit for Sarge Letter Opener Knife Kit

Woodworking Project Kit for Sarge Letter Opener Knife Kit

Woodworking Project Kit for Sarge Letter Opener Knife Kit - ). (Handle material sold separately. Kit also includes brass pins and a fitted leather sheath for safe storage. Build your very own custom desk knife/letter opener to cut open all of your packages and mail with classic elegance with hundreds of choices for knife handle material you will be able to build a truly custom knife. This desk knife kit is constructed from 440c polished stainless steel, is 6-1/8″ overall length with a 2-3/4″ flat-ground blade. You will want to leave this one on the desktop for all to see.

 

Woodworking Project Kit for Zhen Bread KnifeVG-10 S-Steel 9-12 L x 564 T

Woodworking Project Kit for Zhen Bread Knife,VG-10 S-Steel 9-1/2″ L x 5/64″ T

Woodworking Project Kit for Zhen Bread Knife,VG-10 S-Steel 9-1/2″ L x 5/64″ T - Crafted from high carbon stainless steel. Knife blade blank only, handle must be made separately. Scalloped edges to help release sticky items. Customize your knife blade by choosing from a myriad of woods to make the handle yourself. Razor-sharp edges.

 

Woodworking Project Kit - ZHEN Premium Damascus Kitchen Knife Blank Kits Set of 6

Woodworking Project Kit – ZHEN Premium Damascus Kitchen Knife Blank Kits, Set of 6

Woodworking Project Kit – ZHEN Premium Damascus Kitchen Knife Blank Kits, Set of 6 - Designed with the professional cook in mind, these knives make a great gift for the cook in your family. Each high quality blade is crafted by forge welding 66 layers of steel together around a core layer of vg, 10 steel (hrc 60, 62) which creates a high quality blade. This kit contains only the knife blade blanks. Each blade will have its own unique pattern on its surface and an edge that remains extremely sharp over an extended period of time. Zhen premium damascus knife kits are forged in japan utilizing years of knife making skill and technology. Handle material sold separately at woodcraft. Set includes six knife kits cleaver, nakiri, chef’s, santoku, parer, and bread knife. Bread knife is crafted from high carbon stainless steel (hrc 54 -56) and features granton edges (non-stick scallops) to help release thin slices and sticky food. Complete this set of beautiful zhen knives by choosing the wood, acrylic, or other material of your choice to fashion the handles yourself.

 

Woodworking Project Kit for Zhen Paring Knife Blade Blank 3-516 L x 564 T

Woodworking Project Kit for Zhen Paring Knife, Blade Blank, 3-5/16″ L x 5/64″ T

Woodworking Project Kit for Zhen Paring Knife, Blade Blank, 3-5/16″ L x 5/64″ T - Knife blade blank only, handle must be made separately. Crafted from 66 layers of japanese damascus steel. Vg, 10 steel core with a rockwell hardness of 60, 62. Maintains an extremely sharp edge for a long period of time. Customize your knife blade by choosing from a myriad of woods to make the handle yourself.

 

Woodworking Project Kit for WoodRiver Modified Skinner Knife

Woodworking Project Kit for WoodRiver Modified Skinner Knife

Woodworking Project Kit for WoodRiver Modified Skinner Knife - Shape, mount and finish your custom handle for a truly one-of-a-kind knife. The knife’s modified point design, rounded nose and high tip, helps protect the cape from accidental punctures to the hide and allows total control for precise cuts needed when skinning a trophy animal. With this woodriver® kit, you can create a high-quality knife you will be proud to show and use for a lifetime or simply give as a gift, without the need for metalworking tools or the expertise required to make the blade. This modified skinner is constructed from 5/32″-thick high-quality 8cr13mov stainless steel that is easy to sharpen and maintains a keen edge. The kit comes with blade, five screw together rivets, and black leather sheath to securely transport and protect your creation. The 6-3/4″ overall length and 3″ stainless steel blade with finger grip relief will make this your favorite go-to knife. Scale material (handle) and epoxy sold separately.

 

Stubby Soft Touch Stylus Kit Chrome Woodworking Project Kit

Stubby Soft Touch Stylus Kit, Chrome (Woodworking Project Kit)

Stubby Soft Touch Stylus Kit, Chrome (Woodworking Project Kit) - Finished kit is a great gift idea. Turning blanks not included with kit. Soft touch silicone stylus tip will not mar of mark the screen face. Works on popular touch screen devices. You make the body with your lathe shown as finished product.

 

Woodworking Project Kit for Cafe Cutting Board

Woodworking Project Kit for Cafe Cutting Board

Woodworking Project Kit for Cafe Cutting Board - Cutting boards are a classic woodworking project and an especially useful gift. To make it even easier, we put our talented staff to work to create this very pleasing board kit. All you need to do is arrange the wood, glue, clamp and sand. Kit includesmaple 3/4″ x 1-1/2″ x 16″, 2 piecescherry 3/4″ x 1-1/2″ x 16″, 2 pieceswalnut 3/4″ x 1-1/2″ x 16″, 1 pieceyellowheart 1/8″ x 3/4″ x 16″, 4 piecesbloodwood 1/4″ x 3/4″ x 16″, 2 piecescreative options could be cut into three 5″ x 8″ cheese boards or trivets. We have removed some of the steps and waste by milling the stock for you. Each piece of stock hand is selected and surfaced 4 sides. This kit includes enough exotic and domestic hardwood to complete a custom cutting board approximately 3/4″ x 8-1/2″ x 16″.

 

Woodworking Project Kit to Make WoodRiver Cheese Slicer Large Chrome

Woodworking Project Kit to Make WoodRiver Cheese Slicer, Large, Chrome

Woodworking Project Kit to Make WoodRiver Cheese Slicer, Large, Chrome - Kit includes hardware, handle and wire needed to complete the slicer. Large kit uses a board approximately 3/4″ x 5-3/4″ x 9-1/2″. Create this cheese slicer with the help of this kit, your tools, and a wooden blank of your choice (wood and tools sold separately). The board can be made from one of our cutting board kits, bamboo, polymer cutting board material or just an assortment of glued-up scraps. We have sourced hardware to make your own cheese slicer. A great little project that is also a thoughtful gift.

 

Woodworking Project Kit for Zhen Chefs Knife Blade Blank 8-14 L x 564

Woodworking Project Kit for Zhen Chef’s Knife, Blade Blank, 8-1/4″ L x 5/64″

Woodworking Project Kit for Zhen Chef’s Knife, Blade Blank, 8-1/4″ L x 5/64″ - Maintains an extremely sharp edge for a long period of time. Crafted from 66 layers of japanese damascus steel. Knife blade blank only, handle must be made separately. Vg, 10 steel core with a rockwell hardness of 60, 62. Customize your knife blade by choosing from a myriad of woods to make the handle yourself.

 

Woodworking Project Kit to Create Ulu Knife

Woodworking Project Kit to Create Ulu Knife

Woodworking Project Kit to Create Ulu Knife - Create a beautiful, functional ulu knife with this woodworking kit and the wood of your own choosing for the handle. The knife’s rocking motion makes it extremely easy to use. Today people everywhere have discovered the versatility of this knife for slicing meats, dicing vegetables and a lot more. Since the center of force is concentrated over the middle of the blade, it creates twice the downward force compared to conventional cutlery. Cleaning is a breeze simply wash your woodriver® ulu by hand with soapy water in a downward motion from the handle, to avoid the sharp cutting edge, rinse thoroughly and towel dry. (Wood sold separately) the alaskan ulu knife was first crafted by native alaskan residents over 5,000 years ago and was primarily used by eskimo women for skinning and cleaning fish. Do not soak in water.

 

Woodworking Project Kit to Make Zhen Cleaver 6-58 L x 564 T

Woodworking Project Kit to Make Zhen Cleaver, 6-5/8″ L x 5/64″ T

Woodworking Project Kit to Make Zhen Cleaver, 6-5/8″ L x 5/64″ T - Vg, 10 steel core with a rockwell hardness of 60, 62. Customize your knife blade by choosing from a myriad of woods to make the handle yourself. Maintains an extremely sharp edge for a long period of time. Knife blade blank only, handle must be made separately. Crafted from 66 layers of japanese damascus steel.

 

Woodworking Project Kit for WoodRiver Camp Axe Kit with Black Sheath

Woodworking Project Kit for WoodRiver Camp Axe Kit with Black Sheath

Woodworking Project Kit for WoodRiver Camp Axe Kit with Black Sheath - . At only a little over 1 lb. Constructed from 3/16″ thick, 420 stainless steel (hrc51-53), it is easy to sharpen but will hold an edge extremely well. Kit includes one camp axe, one black ballistic nylon sheath, two stainless steel rivets, and one wrench. , It is light enough to carry on an extended adventure trip, yet durable enough to handle outdoor chores. Camp axe measures 11″ overall length with a blade length of 2-5/16″. With this simple, utilitarian, yet compact woodriver® camp axe kit in your backpack, camp or vehicle, you will always be prepared for an unexpected emergency or disaster.

 

Woodworking Project Kit to Make Spear Point Knife

Woodworking Project Kit to Make Spear Point Knife

Woodworking Project Kit to Make Spear Point Knife - Kits include blade and 3 screw together rivets. 8-1/2″ overall length 4-1/4″ blade length. Build beautiful custom knives that everyone will admire. Scales (handles) and 30-minute epoxy not included. Just pick your favorite wood for the scales and create a truly one-of-a-kind knife. Blades are pre-shaped and ground. Single edged. Woodriver knife kits come with screw-together scale (handle) rivets and either stainless steel or striking japanese laminated steel blades.

 

Woodworking Project Kit to Make Drop Point Hunters Knife

Woodworking Project Kit to Make Drop Point Hunter’s Knife

Woodworking Project Kit to Make Drop Point Hunter’s Knife - Scales (handles) and 30-minute epoxy not included. Create a knife you will be proud to show and use for a lifetime, or give as an impressive gift. 7-1/4″ overall length and 3″ stainless steel blade with finger grip relief make this a great general-purpose hunting, fishing or camping knife. The kit comes with blade and three screw together rivets. With this kit, you can make a high-quality knife without the metal working tools or expertise required to make the blade. Shape, mount and finish your custom handles for a truly one-of-a-kind, high-quality knife. The knife is made from 5/32″ thick stainless steel.

 

Razor Kit Chrome Woodworking Project Kit

Razor Kit Chrome (Woodworking Project Kit)

Razor Kit Chrome (Woodworking Project Kit) - . Choose from our extensive selection of our pen blank materials and head to your lathe to create your one-of-a-kind razor today. Everyone deserves to be pampered, and our classic razor kit will do just that. Not only is it a pleasure to turn, but you will appreciate the way it functions even more. Our durable chrome accented razor kit utilizes any standard gillette mach 3 refill.

 

Woodworking Project Kit for Camillus HT-7 Knife

Woodworking Project Kit for Camillus HT-7 Knife

Woodworking Project Kit for Camillus HT-7 Knife - Shape, mount and finish your custom handle for a truly one-of-a-kind, high-quality knife. Since 1876 camillus cutlery has been producing and supplying the world with innovative, reliable, quality-made knives that have stood the test of time. The ht-7 fixed blade knife kit is constructed from 5/32″ titanium bonded® cutlery-grade steel and has been through-hardened to hold an edge. Scale material (handle) and epoxy are sold separately. 7″ overall length and 3-1/4″ blade with built-in lanyard hole help to make this a great general-purpose hunting, fishing or camping knife. The kit comes with blade, screw-together rivets, and fitted black nylon sheath.

 

Woodworking Project Kit to Make Tanto Style Knife

Woodworking Project Kit to Make Tanto Style Knife

Woodworking Project Kit to Make Tanto Style Knife - Woodriver knife kits come with screw-together scale (handle) rivets and either stainless steel or striking japanese laminated steel blades. Build beautiful custom knives that everyone will admire. 11-1/2″ overall length 6-1/8″ blade length. Specialized blade shaped for penetration. Just pick your favorite wood for the scales and create a truly one-of-a-kind knife. Scales (handles) and 30-minute epoxy not included. Kits include blade and rivets. Blades are pre-shaped and ground.

 

Necklace Magnifying Glass Woodworking Project Kit

Necklace Magnifying Glass Woodworking Project Kit

Necklace Magnifying Glass Woodworking Project Kit - Durable plate finish. Easy, quick and fun to make using your 7mm bit and slim style pen bushings. Great for antique shopping, reading fine print or checking prescription bottles. Customize the handle by using the wood of your choice on your lathe.

 

Woodworking Project Kit for Zhen Nakiri Knife Blade Blank 6-58 L x 564 T

Woodworking Project Kit for Zhen Nakiri Knife Blade Blank 6-5/8″ L x 5/64″ T

Woodworking Project Kit for Zhen Nakiri Knife Blade Blank 6-5/8″ L x 5/64″ T - Vg, 10 steel core with a rockwell hardness of 60, 62. Crafted from 66 layers of japanese damascus steel. Knife blade blank only, handle must be made separately. Maintains an extremely sharp edge for a long period of time. Customize your knife blade by choosing from a myriad of woods to make the handle yourself.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.