Coolest 23 Concrete Anchors

 

Guardian Fall Protection 00235 Concrete Anchor

Guardian Fall Protection 00235 Concrete Anchor

Guardian Fall Protection 00235 Concrete Anchor - Designed for use in cured concrete with a compression strength of at least 3000 psi. Installation is easy, just compress spring and insert cable shaft into hole. Constructed of stainless steel, aluminum and other non-corrosive materials. Can fit a 075-inch hole diameter, 3-inches deep minimum. Great for anchoring scaffolding.

 

Simpson Strong Tie STB2-50334 12-Inch by 3-34-Inch Bolt Wedge Anchor for Cracked and Uncracked Concrete 25-Pack

Simpson Strong Tie STB2-50334 1/2-Inch by 3-3/4-Inch Bolt Wedge Anchor for Cracked and Uncracked Concrete, 25-Pack

Simpson Strong Tie STB2-50334 1/2-Inch by 3-3/4-Inch Bolt Wedge Anchor for Cracked and Uncracked Concrete, 25-Pack - . The proprietary tri-segmented clip has dual undercutting embossments on each segment which enable secondary or follow-up expansion if a crack forms and intersects the anchor location. The strong-bolt anchor is proven to offer increased reliability in the most adverse conditions, including cracked concrete under static and seismic loading. The strong-bolt is wedge anchor designed for optimum performance in both cracked and uncracked concrete a requirement that the 2009 ibc places on post-installed anchors.

 

ITW Brands 24220 25PK14x1-34 Concrete Anchor

ITW Brands 24220 25PK1/4×1-3/4 Concrete Anchor

ITW Brands 24220 25PK1/4×1-3/4 Concrete Anchor - Tapcon, 25 pack, 1/4″ x 1-3/4″ hex washer head concrete anchors. .

 

Hammer Drive Concrete Anchor 14 x 2 12 Qty 100

Hammer Drive Concrete Anchor 1/4″ x 2 1/2″ Qty: 100

Hammer Drive Concrete Anchor 1/4″ x 2 1/2″ Qty: 100 - Hammer drive concrete anchor 1/4″ x 2 1/2″ qty 100.

 

Guardian Fall Protection 10715 4-Foot Loop and D-Ring End Concrete Anchor Strap with Protective Sheathing

Guardian Fall Protection 10715 4-Foot Loop and D-Ring End Concrete Anchor Strap with Protective Sheathing

Guardian Fall Protection 10715 4-Foot Loop and D-Ring End Concrete Anchor Strap with Protective Sheathing - They can be installed as permanent anchors during building construction to protruded through poured concrete, as well as in temporary applications such as wood framing, rebar work, and pipe racking—though always ensure that the selected attachment point can withstand loads of up to 5,000 pounds. Concrete anchor straps are intended for one impact only, and must be cut off if exposed to forces of fall arrest. Guardian will also custom design and fabricate concrete anchor straps specific to any customer need. These anchors are sheathed in heavy duty nylon webbing to protect their inner core from any abrasion and wear, and are some of the most cost effective anchors around. . The guardian fall protection line of concrete anchor straps is one of the most extensive available in the market.

 

PC Products 72561 PC-Concrete Two-Part Epoxy Adhesive Paste for Anchoring and Crack Repair 86 oz Cartridge Gray

PC Products 72561 PC-Concrete Two-Part Epoxy Adhesive Paste for Anchoring and Crack Repair, 8.6 oz Cartridge, Gray

PC Products 72561 PC-Concrete Two-Part Epoxy Adhesive Paste for Anchoring and Crack Repair, 8.6 oz Cartridge, Gray - Provides work time of 20 minutes and cure time of 4 hours (at 75 degrees f). Pc-concrete is excellent for filling and repairing cracks in concrete, and out-performs all caulks and hydraulic cements. High-tack paste resists moisture for application in damp environments and can be used in vertical applications. Can be used in indoor and outdoor applications with an application temperature range from 35 to 115 degrees f and a service temperature range from -20 to +115 degrees f. Pc-concrete is the best solution for permanent concrete repair. Pc-concrete will not come loose from any cleaned concrete surface and will hold during expansion and contraction of concrete. Meets astm c881-99. Two-part epoxy adhesive paste to fill and repair cracks in concrete, and to anchor threaded rods, bolts, and dowels into concrete, grout-filled block, and unreinforced masonry. Formulated for anchoring threaded rods, bolts, rebar dowels and smooth dowels into concrete, grout filled block and unreinforced masonry.

 

ITW Brands 24293 15 Pack 516 x 3 Steel Hex Washer Head Large Diameter Tapcon Concrete Anchor

ITW Brands 24293 15 Pack, 5/16″ x 3″, Steel, Hex Washer Head, Large Diameter Tapcon Concrete Anchor

ITW Brands 24293 15 Pack, 5/16″ x 3″, Steel, Hex Washer Head, Large Diameter Tapcon Concrete Anchor - . 5/16″x3″, steel, hex washer head, large diameter tapcon concrete anchor.

 

TW Brands Tapcon 24397 14x4 Concrete Anchor-25Pack

TW Brands Tapcon 24397 1/4×4 Concrete Anchor-25Pack

TW Brands Tapcon 24397 1/4×4 Concrete Anchor-25Pack - . 75 pack, 1/4″ x 4″, tapcon phillips flat head concrete anchors.

 

38 x 2 12 Titen HD Concrete Anchor Zinc Plated 50

3/8 x 2 1/2 Titen HD Concrete Anchor Zinc Plated (50)

3/8 x 2 1/2 Titen HD Concrete Anchor Zinc Plated (50) - The high strength, easy to install titen hd® anchor has been tested and shown to provide outstanding performance in cracked and uncracked concrete under both static and seismic loading conditions. The titen hd® anchor is a patented, high-strength screw anchor for concrete and masonry. The self-undercutting, non-expansion characteristics of the titen hd® anchor make it ideal for structural applications, even at reduced edge distances and spacings. It is designed for optimum performance in both cracked and uncracked concrete a requirement that the 2006 ibc places on post-installed anchors. Recommended for permanent dry, interior, non-corrosive environments or temporary outdoor applications. .

 

Hammer Drive Concrete Anchor wStainless Nail 14 x 2 Qty 50

Hammer Drive Concrete Anchor w/Stainless Nail 1/4″ x 2″ Qty: 50

Hammer Drive Concrete Anchor w/Stainless Nail 1/4″ x 2″ Qty: 50 - Hammer drive concrete anchor w/stainless nail 1/4″ x 2″ qty 50.

 

Hammer Drive Concrete Anchor 14 x 2 12 Qty 50

Hammer Drive Concrete Anchor 1/4″ x 2 1/2″ Qty: 50

Hammer Drive Concrete Anchor 1/4″ x 2 1/2″ Qty: 50 - Hammer drive concrete anchor 1/4″ x 2 1/2″ qty 50.

 

Antique Style Steel Sliding Wood Barn Door Hardware 120″ with Splice Premium Quality Extra Supply  Longer Bolts for Door Thickness 1-34 and Concrete Anchor Bolts

Antique Style Steel Sliding Wood Barn Door Hardware 120″ with Splice, Premium Quality. Extra Supply : Longer Bolts for Door Thickness 1-3/4″ and Concrete Anchor Bolts !

Antique Style Steel Sliding Wood Barn Door Hardware 120″ with Splice, Premium Quality. Extra Supply : Longer Bolts for Door Thickness 1-3/4″ and Concrete Anchor Bolts ! - Easy installation and detailed instruction manual included door panel is not included. Premium quality, strong hardware for interior and exterior use. Us standard 16″ stud spacing holes. 120″antique style steel sliding wood barn door hardware, rich dark brown with splice. Wood door thickness from 1-3/8, 1-3/4.

 

3M DBI-SALA 2104560 Concrete Anchor D-Ring Anchor for 1116 Hole with Swiveling D-Ring SilverRed

3M DBI-SALA 2104560 Concrete Anchor, D-Ring Anchor for 11/16″ Hole with Swiveling D-Ring, Silver/Red

3M DBI-SALA 2104560 Concrete Anchor, D-Ring Anchor for 11/16″ Hole with Swiveling D-Ring, Silver/Red - Rugged design for harsh environments with no moving or fragile parts to foul-up. Re-usable d-ring assembly, just install a new bolt and it’s ready for use again. Safe hook-up indicator notifies the user the anchor has been installed properly. The anchor can be used in mulitple orientations for added jobsite versatility and flexibility. Installation is simple and efficient, taking just seconds utilizing standard concrete tools. For flexibility, install into 11/16-inch, 18mm or 3⁄4-inch holes, only standard drill bits needed. Concrete d-ring anchor for 11/16 in, 18 mm or 3/4 in hole with swiveling d-ring. A built-in d-ring provides a compatible connection for your fall protection system and swivels keeping your connecting component in-line at all times. Makes installing into concrete simple, fast and easy for added worker satisfaction and productivity. Weight capacity 420-pounds.

 

Vestil AS-383 Concrete Anchor Single Bolt 38 Diameter x 3 Length

Vestil AS-383 Concrete Anchor Single Bolt, 3/8″ Diameter x 3″ Length

Vestil AS-383 Concrete Anchor Single Bolt, 3/8″ Diameter x 3″ Length - Anchor construction hold units in place in the most demanding environments. Vestil concrete anchor single bolt kit includes concrete anchor, bolt, washer and nut. Measures 3/8-inches diameter by 3-inches length. Zinc plated steel provides a strong anchor point. Sleeve length provides added security. Anchor design makes installation quicker and easier.

 

Concrete Anchors Set of 50

Concrete Anchors (Set of 50)

Concrete Anchors (Set of 50) - Color -beige. . Product type -hardware. Acc230 features -concrete and cinder block installation. Overall product weight -1 lbs. 3″. Dimensions overall height, top to bottom -0. -Security hardware is not included. -Comes with concrete anchor.

 

Hammer Drive Concrete Anchor 14 x 2 Qty 25

Hammer Drive Concrete Anchor 1/4″ x 2″ Qty: 25

Hammer Drive Concrete Anchor 1/4″ x 2″ Qty: 25 - Length identification head marks. Threaded end is chamfered for ease of starting nut. All items are new.

 

ITW Brands 24120 8PK 14x1-34 Concrete Anchor

ITW Brands 24120 8PK 1/4×1-3/4 Concrete Anchor

ITW Brands 24120 8PK 1/4×1-3/4 Concrete Anchor - . Tapcon, 8 pack, 1/4″ x 1-3/4″ hex washer head concrete anchors.

 

3M Protecta PRO 2190053 Concrete Wedge Anchor For 34 Hole with Swiveling D-Ring SilverGold

3M Protecta PRO 2190053 Concrete Wedge Anchor, For 3/4″ Hole, with Swiveling D-Ring, Silver/Gold

3M Protecta PRO 2190053 Concrete Wedge Anchor, For 3/4″ Hole, with Swiveling D-Ring, Silver/Gold - Device can be removed and simply re-installed in a new loaction for added jobsite flexibility and lower overall cost of ownership. Provides a safe, fall arrest rated 5,000-pound anchor point for vertical or overhead/ceiling applications. Concrete wedge anchor for 3/4 in (19mm) hole with swiveling d-ring. Virtually eliminates the need for tools to remove a stuck anchor from the hole, giving the user instant mobility. Portable and reusable anchor can be removed and simply re-installed in a new location for added jobsite flexibility and lower overall cost of ownership. Exclusive quick-release button boost productivity by providing immediate anchor removal for added worker satisfaction. The anchor can be used in mulitple orientations for added jobsite versatility and flexibility. A built-in d-ring provides a compatible connection for your fall protection system and swivels keeping your connecting component in-line at all times. Installation is simple and efficient, taking just seconds utilizing standard concrete tools. Unique forged connection ring provides a compatible tie-off point for your personal fall arrest system for added safety.

 

Vestil AS-125-4PK Concrete Anchor Four Bolt Kit 12 Diameter x 5 Length

Vestil AS-125-4PK Concrete Anchor Four Bolt Kit, 1/2″ Diameter x 5″ Length

Vestil AS-125-4PK Concrete Anchor Four Bolt Kit, 1/2″ Diameter x 5″ Length - Vestil concrete anchor four bolt kit includes concrete anchor, bolt, washer and nut. Sleeve length provides added security. Anchor design makes installation quicker and easier. Measures 1/2-inches diameter by 5-1/2-inches length. Anchor construction hold units in place in the most demanding environments. Zinc plated steel provides a strong anchor point.

 

ITW Brands 24192 516 x 2 Steel Hex Washer Head Tapcon Large Diameter Concrete Anchor

ITW Brands 24192 5/16″ x 2″, Steel Hex Washer Head Tapcon Large Diameter Concrete Anchor

ITW Brands 24192 5/16″ x 2″, Steel Hex Washer Head Tapcon Large Diameter Concrete Anchor - 5/16″ x 2″, steel hex washer head tapcon large diameter concrete anchor. .

 

Simpson Strong Tie THD50600H 12-Inch by 6-Inch Titen HD Zinc Plated Heavy Duty Screw Anchor for ConcreteMasonry 20 per Pack

Simpson Strong Tie THD50600H 1/2-Inch by 6-Inch Titen HD Zinc Plated Heavy Duty Screw Anchor for Concrete/Masonry, 20 per Pack

Simpson Strong Tie THD50600H 1/2-Inch by 6-Inch Titen HD Zinc Plated Heavy Duty Screw Anchor for Concrete/Masonry, 20 per Pack - Tested per ac193 to ensure outstanding performance in both cracked and uncracked concrete. Threads along the length of the anchor undercut the concrete and efficiently transfer the load to the base material. Designed to install using standard ansi tolerance drill bits. Specialized head treated process creates superior hardness. Easy post-installation inspection head stamped with anchor length in inches.

 

ITW Brands 24115 8PK14x1-14 Concrete Anchor

ITW Brands 24115 8PK1/4×1-1/4 Concrete Anchor

ITW Brands 24115 8PK1/4×1-1/4 Concrete Anchor - Tapcon, 8 pack, 1/4″ x 1-1/4″ hex washer head concrete anchors. .

 

ITW Brands 24193 516 x 3 Steel Hex Washer Head Large Diameter Tapcon Concrete Anchors

ITW Brands 24193 5/16″ x 3″, Steel Hex Washer Head Large Diameter Tapcon Concrete Anchors

ITW Brands 24193 5/16″ x 3″, Steel Hex Washer Head Large Diameter Tapcon Concrete Anchors - . 5/16″ x 3″, steel hex washer head large diameter tapcon concrete anchors.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.