Coolest 23 Drill Mills

 

Drill America MMO18-4FSE-XLONG Solid Carbide Extra Long End Mill Polished Finish 4 Flute Square End 1 Cutting Length 18 Cutting Diameter 3 Length 18 Shank Pack of 1

Drill America MMO1/8-4FSE-XLONG Solid Carbide Extra Long End Mill, Polished Finish, 4 Flute, Square End, 1″ Cutting Length, 1/8″ Cutting Diameter, 3″ Length, 1/8″ Shank (Pack of 1)

Drill America MMO1/8-4FSE-XLONG Solid Carbide Extra Long End Mill, Polished Finish, 4 Flute, Square End, 1″ Cutting Length, 1/8″ Cutting Diameter, 3″ Length, 1/8″ Shank (Pack of 1) - 4 flute single end. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Available in polished finish. Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

Grizzly G0704 Drill Mill with Stand

Grizzly G0704 Drill Mill with Stand

Grizzly G0704 Drill Mill with Stand - This great little machine sports some of the same features found on much larger mill/drills dovetail column, variable speed 1 hp motor, r-8 spindle with digital read out, tapered gibs with double locks, large 7-1/16″ x 26-5/8″ table and it comes with its own stand this is an excellent value and great for just starting out or even as a dedicated, single-purpose machine in the shop features • dovetail column • safety shut off switch • spindle speed dro • fine feed head control • 2-speed gearbox • clear guard on spindle • rubber chip guards on ways • zero setting dials • dials read inches • forward/reverse switch • stand with chip tray and cabinet measures 16″ l x 16″ w x 31″ h specifications • motor 1 hp, 110v, 12a, single-phase • spindle taper r-8 • spindle travel 2″ • t-slots 3 @ 2-1/2″ centers, 7/16″ wide • head travel 11″ • head tilt 90° l/r • max. Distance spindle to table 13″ • swing 15″ • table travel (longitudinal) 18-7/8″ • table travel (cross) 6-7/8″ • table size 7-1/16″ x 26-5/8″ • spindle speed 50-2250 rpm • approximate shipping weight 362 lbs.

 

SHOP FOX M1110 6-Inch by 21-Inch Variable Speed Mill and Drill

SHOP FOX M1110 6-Inch by 21-Inch Variable Speed Mill and Drill

SHOP FOX M1110 6-Inch by 21-Inch Variable Speed Mill and Drill - The precision ground cast iron milling table with coolant troughs and drain will accept an aftermarket coolant system and power feed. Enjoy the precision ground dovetail column that allows for fast and easy tool changes without having to re-register the spindle centerline. These features combined with the outstanding x and y table travel of 5-3/4 x 15-1/2-inch make the m1110 mill/drill one of the most popular units available. Made in an iso 9001 factory. The z-axis handwheel with the fully geared lift system easily lifts and lowers the headstock up to 14-3/4-inch. A 3/4 hp reversible variable-speed universal motor drives an all-steel geared hi/lo range gearbox which drives the 60mm diameter quill and r-8 spindle.

 

Drill America MMO964-4FSE Solid Carbide End Mill Polished Finish 4 Flute Square End 916 Cutting Length 964 Cutting Diameter 2 Length 316 Shank Pack of 1

Drill America MMO9/64-4FSE Solid Carbide End Mill, Polished Finish, 4 Flute, Square End, 9/16″ Cutting Length, 9/64″ Cutting Diameter, 2″ Length, 3/16″ Shank (Pack of 1)

Drill America MMO9/64-4FSE Solid Carbide End Mill, Polished Finish, 4 Flute, Square End, 9/16″ Cutting Length, 9/64″ Cutting Diameter, 2″ Length, 3/16″ Shank (Pack of 1) - Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Available in polished finish. 4 flute single end. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

Magafor 8090 Carbide Drill Mill Uncoated Bright Finish 90 Deg Point Angle 2 Flutes 2-38 Overall Length 025 Cutting Diameter 516 Shank Diameter

Magafor 8090 Carbide Drill Mill, Uncoated (Bright) Finish, 90 Deg Point Angle, 2 Flutes, 2-3/8″ Overall Length, 0.25″ Cutting Diameter, 5/16″ Shank Diameter

Magafor 8090 Carbide Drill Mill, Uncoated (Bright) Finish, 90 Deg Point Angle, 2 Flutes, 2-3/8″ Overall Length, 0.25″ Cutting Diameter, 5/16″ Shank Diameter - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. This multi use bits can be used for spotting, grooving, engraving, profiling, interpolation, drilling and chamfering.

 

Drill America MMO34-4FSE Solid Carbide End Mill Polished Finish 4 Flute Square End 1-12 Cutting Length 34 Cutting Diameter 4 Length 34 Shank Pack of 1

Drill America MMO3/4-4FSE Solid Carbide End Mill, Polished Finish, 4 Flute, Square End, 1-1/2″ Cutting Length, 3/4″ Cutting Diameter, 4″ Length, 3/4″ Shank (Pack of 1)

Drill America MMO3/4-4FSE Solid Carbide End Mill, Polished Finish, 4 Flute, Square End, 1-1/2″ Cutting Length, 3/4″ Cutting Diameter, 4″ Length, 3/4″ Shank (Pack of 1) - Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Available in polished finish. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 4 flute single end.

 

Melin Tool AMG-DP1 Carbide Drill Mill Uncoated Bright Finish 30 Deg Point Angle 2 Flutes 15 Overall Length 0125 Cutting Diameter 0125 Shank Diameter

Melin Tool AMG-DP1 Carbide Drill Mill, Uncoated (Bright) Finish, 30 Deg Point Angle, 2 Flutes, 1.5″ Overall Length, 0.125″ Cutting Diameter, 0.125″ Shank Diameter

Melin Tool AMG-DP1 Carbide Drill Mill, Uncoated (Bright) Finish, 30 Deg Point Angle, 2 Flutes, 1.5″ Overall Length, 0.125″ Cutting Diameter, 0.125″ Shank Diameter - Can be used for drilling, slotting, chamfering, and profile milling. Round shanks allow use with a wide variety of toolholding systems. Available in 90 degree points. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.

 

Melin Tool A-DP Cobalt Steel Drill Mill Uncoated Bright Finish 30 Deg Point Angle 2 Flutes 425 Overall Length 1 Cutting Diameter 075 Shank Diameter

Melin Tool A-DP Cobalt Steel Drill Mill, Uncoated (Bright) Finish, 30 Deg Point Angle, 2 Flutes, 4.25″ Overall Length, 1″ Cutting Diameter, 0.75″ Shank Diameter

Melin Tool A-DP Cobalt Steel Drill Mill, Uncoated (Bright) Finish, 30 Deg Point Angle, 2 Flutes, 4.25″ Overall Length, 1″ Cutting Diameter, 0.75″ Shank Diameter - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Can be used for drilling, slotting, chamfering, and profile milling. Round shanks allow use with a wide variety of toolholding systems. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Used for general purpose milling in most materials of medium and tough alloy materials such as stainless steel, nickel base alloy, brass, iron etc.

 

GOWE CNC Drill&Mill Machine20mm Drill Machine850W CNC Machine

GOWE CNC Drill&Mill Machine/20mm Drill Machine/850W CNC Machine

GOWE CNC Drill&Mill Machine/20mm Drill Machine/850W CNC Machine - Cnc drill&mill machine/20mm drill machine/850w cnc machine. Made in usa. Coated altin for extended tool life. Multi-purpose drill mills for drilling, milling, spotting, chamfering, and countersinking.

 

Drill America MMO18-4FSE-BN Solid Carbide End Mill Polished Finish 4 Flute Ball End 12 Cutting Length 18 Cutting Diameter 1-12 Length 18 Shank Pack of 1

Drill America MMO1/8-4FSE-BN Solid Carbide End Mill, Polished Finish, 4 Flute, Ball End, 1/2″ Cutting Length, 1/8″ Cutting Diameter, 1-1/2″ Length, 1/8″ Shank (Pack of 1)

Drill America MMO1/8-4FSE-BN Solid Carbide End Mill, Polished Finish, 4 Flute, Ball End, 1/2″ Cutting Length, 1/8″ Cutting Diameter, 1-1/2″ Length, 1/8″ Shank (Pack of 1) - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 4 flute single end ball. Available in polished finish.

 

Drill America MMO1164-4FSE Solid Carbide End Mill Polished Finish 4 Flute Square End 916 Cutting Length 1164 Cutting Diameter 2 Length 316 Shank Pack of 1

Drill America MMO11/64-4FSE Solid Carbide End Mill, Polished Finish, 4 Flute, Square End, 9/16″ Cutting Length, 11/64″ Cutting Diameter, 2″ Length, 3/16″ Shank (Pack of 1)

Drill America MMO11/64-4FSE Solid Carbide End Mill, Polished Finish, 4 Flute, Square End, 9/16″ Cutting Length, 11/64″ Cutting Diameter, 2″ Length, 3/16″ Shank (Pack of 1) - 4 flute single end. Available in polished finish. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

Melin Tool AMG-DP Carbide Drill Mill AlTiN Monolayer Finish 30 Deg Point Angle 2 Flutes 15 Overall Length 0125 Cutting Diameter 0125 Shank Diameter

Melin Tool AMG-DP Carbide Drill Mill, AlTiN Monolayer Finish, 30 Deg Point Angle, 2 Flutes, 1.5″ Overall Length, 0.125″ Cutting Diameter, 0.125″ Shank Diameter

Melin Tool AMG-DP Carbide Drill Mill, AlTiN Monolayer Finish, 30 Deg Point Angle, 2 Flutes, 1.5″ Overall Length, 0.125″ Cutting Diameter, 0.125″ Shank Diameter - Available in 60 degree points. Aluminum titanium nitride is similar to tialn but with a higher aluminum content for improved hardness and smoothness. Can be used for drilling, slotting, chamfering, and profile milling. Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

Drill America MMO716-4FSE Solid Carbide End Mill Polished Finish 4 Flute Square End 1 Cutting Length 716 Cutting Diameter 2-34 Length 716 Shank Pack of 1

Drill America MMO7/16-4FSE Solid Carbide End Mill, Polished Finish, 4 Flute, Square End, 1″ Cutting Length, 7/16″ Cutting Diameter, 2-3/4″ Length, 7/16″ Shank (Pack of 1)

Drill America MMO7/16-4FSE Solid Carbide End Mill, Polished Finish, 4 Flute, Square End, 1″ Cutting Length, 7/16″ Cutting Diameter, 2-3/4″ Length, 7/16″ Shank (Pack of 1) - Available in polished finish. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. 4 flute single end. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems.

 

Melin Tool AMG-DP Carbide Micro Drill Mill AlTiN Monolayer Finish 30 Deg Point Angle 2 Flutes 15 Overall Length 00625 Cutting Diameter 0125 Shank Diameter

Melin Tool AMG-DP Carbide Micro Drill Mill, AlTiN Monolayer Finish, 30 Deg Point Angle, 2 Flutes, 1.5″ Overall Length, 0.0625″ Cutting Diameter, 0.125″ Shank Diameter

Melin Tool AMG-DP Carbide Micro Drill Mill, AlTiN Monolayer Finish, 30 Deg Point Angle, 2 Flutes, 1.5″ Overall Length, 0.0625″ Cutting Diameter, 0.125″ Shank Diameter - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Available in 60 degree points. Can be used for drilling, slotting, chamfering, and profile milling. Aluminum titanium nitride is similar to tialn but with a higher aluminum content for improved hardness and smoothness. Round shanks allow use with a wide variety of toolholding systems.

 

Drill America MMO316-4FSE Solid Carbide End Mill Polished Finish 4 Flute Square End 58 Cutting Length 316 Cutting Diameter 2 Length 316 Shank Pack of 1

Drill America MMO3/16-4FSE Solid Carbide End Mill, Polished Finish, 4 Flute, Square End, 5/8″ Cutting Length, 3/16″ Cutting Diameter, 2″ Length, 3/16″ Shank (Pack of 1)

Drill America MMO3/16-4FSE Solid Carbide End Mill, Polished Finish, 4 Flute, Square End, 5/8″ Cutting Length, 3/16″ Cutting Diameter, 2″ Length, 3/16″ Shank (Pack of 1) - Available in polished finish. 4 flute single end. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems.

 

Drill America MMO14-4FSE-XLONG Solid Carbide Extra Long End Mill Polished Finish 4 Flute Square End 1-12 Cutting Length 14 Cutting Diameter 4 Length 14 Shank Pack of 1

Drill America MMO1/4-4FSE-XLONG Solid Carbide Extra Long End Mill, Polished Finish, 4 Flute, Square End, 1-1/2″ Cutting Length, 1/4″ Cutting Diameter, 4″ Length, 1/4″ Shank (Pack of 1)

Drill America MMO1/4-4FSE-XLONG Solid Carbide Extra Long End Mill, Polished Finish, 4 Flute, Square End, 1-1/2″ Cutting Length, 1/4″ Cutting Diameter, 4″ Length, 1/4″ Shank (Pack of 1) - 4 flute single end. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Available in polished finish. Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment.

 

Micro 100 DM-375-290 2 Flute 90° Included Point Angle Drill Mill 38 Cutter Diameter 38 Shank Diameter 1 Flute Length 25 Overall Length Solid Carbide Tool

Micro 100 DM-375-290 2 Flute 90° Included Point Angle Drill Mill, 3/8″ Cutter Diameter, 3/8″ Shank Diameter, 1″ Flute Length, 2.5″ Overall Length, Solid Carbide Tool

Micro 100 DM-375-290 2 Flute 90° Included Point Angle Drill Mill, 3/8″ Cutter Diameter, 3/8″ Shank Diameter, 1″ Flute Length, 2.5″ Overall Length, Solid Carbide Tool - Designed and engineered to perform both drilling and milling applications when applicable. Each tool’s cutting edge/tip has a distinctive mirror like finish that significantly adds to material removal while improving surface finishes. The micro 100 dm-375-290 uncoated , 2 flute, solid carbide, 90° included point angle, drill mill. Tools can be utilized for both roughing and finishing. Manufactured with close tolerances to ensure ultimate precision and performance. Depending on the application, the drill mill can also be utilized as a chamfering tool as well. Micro 100 solid carbide tools feature more than just a micro-grain of excellent quality. For over 45 years, micro 100 is a known industry leader and internationally acclaimed when it comes to solid carbide tooling. Their substrate is in a class of its own resulting from exclusive treating processes that allow for vastly increased speed and feed rates.

 

Drill America MMO12-2FSE Solid Carbide End Mill Polished Finish 2 Flute Square End 1 Cutting Length 12 Cutting Diameter 3 Length 12 Shank Pack of 1

Drill America MMO1/2-2FSE Solid Carbide End Mill, Polished Finish, 2 Flute, Square End, 1″ Cutting Length, 1/2″ Cutting Diameter, 3″ Length, 1/2″ Shank (Pack of 1)

Drill America MMO1/2-2FSE Solid Carbide End Mill, Polished Finish, 2 Flute, Square End, 1″ Cutting Length, 1/2″ Cutting Diameter, 3″ Length, 1/2″ Shank (Pack of 1) - 2 flute single end. Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Available in polished finish.

 

Grizzly G0619 MillDrill 6 x 21-Inch

Grizzly G0619 Mill/Drill, 6 x 21-Inch

Grizzly G0619 Mill/Drill, 6 x 21-Inch - With this machine you. Upgrade to this mill/drill and have all of the great features shown on g0463 and add a tilting head, a multifunction digital scale on the quill, a quick reversing tapping feature, push button speed control and digital speed display.

 

Micro 100 DM-250-490 4 Flute 90° Included Point Angle Drill Mill 14 Cutter Diameter 14 Shank Diameter 34 Flute Length 25 Overall Length Solid Carbide Tool

Micro 100 DM-250-490 4 Flute 90° Included Point Angle Drill Mill, 1/4″ Cutter Diameter, 1/4″ Shank Diameter, 3/4″ Flute Length, 2.5″ Overall Length, Solid Carbide Tool

Micro 100 DM-250-490 4 Flute 90° Included Point Angle Drill Mill, 1/4″ Cutter Diameter, 1/4″ Shank Diameter, 3/4″ Flute Length, 2.5″ Overall Length, Solid Carbide Tool - Manufactured with close tolerances to ensure ultimate precision and performance. The micro 100 dm-250-490 uncoated , 4 flute, solid carbide, 90° included point angle, drill mill. Micro 100 solid carbide tools feature more than just a micro-grain of excellent quality. Designed and engineered to perform both drilling and milling applications when applicable. Each tool’s cutting edge/tip has a distinctive mirror like finish that significantly adds to material removal while improving surface finishes. For over 45 years, micro 100 is a known industry leader and internationally acclaimed when it comes to solid carbide tooling. Their substrate is in a class of its own resulting from exclusive treating processes that allow for vastly increased speed and feed rates. Depending on the application, the drill mill can also be utilized as a chamfering tool as well. Tools can be utilized for both roughing and finishing.

 

Drill America MMO12-2FSE-BN Solid Carbide End Mill Polished Finish 2 Flute Ball End 1 Cutting Length 12 Cutting Diameter 3 Length 12 Shank Pack of 1

Drill America MMO1/2-2FSE-BN Solid Carbide End Mill, Polished Finish, 2 Flute, Ball End, 1″ Cutting Length, 1/2″ Cutting Diameter, 3″ Length, 1/2″ Shank (Pack of 1)

Drill America MMO1/2-2FSE-BN Solid Carbide End Mill, Polished Finish, 2 Flute, Ball End, 1″ Cutting Length, 1/2″ Cutting Diameter, 3″ Length, 1/2″ Shank (Pack of 1) - 2 flute single end ball. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Available in polished finish.

 

Kodiak Cutting Tools KODIAK242815 USA Made Solid Carbide Drill Mill 4 Flutes 60 Degree AlTiN Coated 14 Diameter 14 Shank 34 Length of Cut 2-12 Overall Length

Kodiak Cutting Tools KODIAK242815 USA Made Solid Carbide Drill Mill, 4 Flutes, 60 Degree, AlTiN Coated, 1/4″ Diameter, 1/4″ Shank, 3/4″ Length of Cut, 2-1/2″ Overall Length

Kodiak Cutting Tools KODIAK242815 USA Made Solid Carbide Drill Mill, 4 Flutes, 60 Degree, AlTiN Coated, 1/4″ Diameter, 1/4″ Shank, 3/4″ Length of Cut, 2-1/2″ Overall Length - . 1/4 inch diameter solid carbide drill mill 1/4″ shank 3/4″ length of cut 2-1/2″ overall length 4 flute carbide, drill mill.

 

Drill America MMO316-4FSE-BN Solid Carbide End Mill Polished Finish 4 Flute Ball End 58 Cutting Length 316 Cutting Diameter 2 Length 316 Shank Pack of 1

Drill America MMO3/16-4FSE-BN Solid Carbide End Mill, Polished Finish, 4 Flute, Ball End, 5/8″ Cutting Length, 3/16″ Cutting Diameter, 2″ Length, 3/16″ Shank (Pack of 1)

Drill America MMO3/16-4FSE-BN Solid Carbide End Mill, Polished Finish, 4 Flute, Ball End, 5/8″ Cutting Length, 3/16″ Cutting Diameter, 2″ Length, 3/16″ Shank (Pack of 1) - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Available in polished finish. Round shanks allow use with a wide variety of toolholding systems. 4 flute single end ball.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.