Top 16 Best Clamp Tools

 

6 C Clamps Set 6 Inch Auto Mechanic C Clamp Tool

6 C Clamps Set 6 Inch Auto Mechanic C Clamp Tool

6 C Clamps Set 6 Inch Auto Mechanic C Clamp Tool - Drop-forged. Gloss enamel finish. Screw handle slides to work in tight spots. Fully threaded screw travels the entire six inches. Screw saddle flexes to securely clamp uneven surfaces. Quantity 6.

 

IWISS PEX Ratcheting CINCH Crimping Tool Crimper for Stainless Steel Clamps from 38to 1 Fastening Tool

IWISS PEX Ratcheting CINCH Crimping Tool Crimper for Stainless Steel Clamps from 3/8″to 1″ Fastening Tool

IWISS PEX Ratcheting CINCH Crimping Tool Crimper for Stainless Steel Clamps from 3/8″to 1″ Fastening Tool - This tool can be used with any astm f2908 stainless steel clamps from any manufacturer. This tool is factory adjusted and does not require any additional calibration or adjustment. Ratchet design releases when the cinch clamp tab is properly pinched. Crimping range3/8″, 1/2″, 5/8″, 3/4″ and 1″. Steel stainless cinch tool-pex clamp.

 

Clamptite Kit - CLT01 - 4 34 Stainless Steel Tool w Aluminum Bronze T-Bar Nut  360 ft 1lb Can of 032 Safety Wire

Clamptite Kit – CLT01 – 4 3/4″ Stainless Steel Tool w/ Aluminum Bronze T-Bar Nut + 360 ft/ 1lb. Can of .032 Safety Wire

Clamptite Kit – CLT01 – 4 3/4″ Stainless Steel Tool w/ Aluminum Bronze T-Bar Nut + 360 ft/ 1lb. Can of .032 Safety Wire - Clamptite saves you money on clamps by turning any inexpensive wire into the best clamp money can buy. Clamptite quickly replaces ineffective or damaged conventional hose clamps with a temporary or permanent clamping mechanism formed from stainless steel safety wire. No matter if you’re looking for a quick and effective emergency leak repair or a bullet proof means for securing nearly any material from rubber hoses to spliced wires, this new and innovative tool is a must have addition to any portable or shop tool chest. Clamps formed using clamptite seal a full 360 degrees with no flat spots and can be used to band any type or size material. The clamptite tool can be used with various sizes of wires, which eliminates space as well as strength issues, oftened encountered with screw operated worm gear type clamps. Ideal for emergency applications such has a hose bursting in your vehicle, the tools can be used as banding tools, reducers or for creating custom clamps with any gauge wire and almost any type of wire you may have including stainless steel wire, tie wire, and even a wire clothes hanger. The clamptite tool provides a way of tightening wires wrapped around an object and then locking it in place. Just under 6 inches in length the clamptite tool is about the size of a pencil and is precision machined from stainless steel and alumabronze. Clamptite tools give you the ability to create a perfect, custom fitted clamp for your hoses in any application.

 

Capri Tools Locking Welding Clamp 3 Pieces

Capri Tools Locking Welding Clamp, 3 Pieces

Capri Tools Locking Welding Clamp, 3 Pieces - Incudes three clamps includes an 11″ c-clamp, 10″ sheet metal clamp and 10″ general welding clamp to cover a variety of metal work. Durable build hardened steel jaws with adjustable pressure provide superior strength for professional metal workers and hobbyists. Value added an excellent value at half the price of comparable welding clamps. Quick-lock release locks metal pieces firmly in place and includes quick-lock release for easy removal. Essential accessories three-piece welding clamp set to secure free-moving metal objects during the welding and fabrication process.

 

Watts PEX P-949 Ratcheting Cinch Clamp Tool for 38-Inch 12-Inch 34-Inch and 1-Inch Stainless Steel Cinch Clamps

Watts PEX P-949 Ratcheting Cinch Clamp Tool for 3/8-Inch 1/2-Inch 3/4-Inch and 1-Inch Stainless Steel Cinch Clamps

Watts PEX P-949 Ratcheting Cinch Clamp Tool for 3/8-Inch 1/2-Inch 3/4-Inch and 1-Inch Stainless Steel Cinch Clamps - Pex cinchclamps tool, quick and reliable connections. 1st time every time connections as tool design eliminates worries of old style copper crimp ring tool jaws and calibration issues. Meets astm f2098. 1 tool does 3/8” (sku 452600), 1/2” (sku 451638), 3/4” (sku 451674), and 1” (sku 452508) stainless steel cinchclamp pex connections. S. Less expensive than buying 3 separate tools. I. Immediate pressure testing to well over 100 p. Ratchet design releases when cinchclamp tab is properly set.

 

IRWIN Tools VISE-GRIP Fast Release Locking C-Clamp Regular Tips 11-inch 19T

IRWIN Tools VISE-GRIP Fast Release Locking C-Clamp, Regular Tips, 11-inch (19T)

IRWIN Tools VISE-GRIP Fast Release Locking C-Clamp, Regular Tips, 11-inch (19T) - C-clamp has wide-opening jaws to provide greater versatility in clamping a variety of shapes. Turn screw on the clamp to adjust pressure and fit work stays adjusted for repetitive use. Constructed of high-grade heat-treated alloy steel for maximum toughness and durability. Fast release is 2x easier to open, has a no-pinch release and offers more finger room. 11-inch size. Irwin vise-grip clamp uses fast release that is easy to open with a no-trigger release and 1-hand operation. Wide-opening jaws provide greater versatility in clamping a variety of shapes. 3-3/8-inch jaw capacity. Turn screw to adjust pressure and fit work stays adjusted for repetitive use.

 

Jackson 303 18-Inch Tri Clamp Pipe Alignment Tool

Jackson 303 18-Inch Tri Clamp Pipe Alignment Tool

Jackson 303 18-Inch Tri Clamp Pipe Alignment Tool - Versatile can be used for multiple fit ups pipe to pipe, pipe to fitting, pipe to flange, and pipe to tee. Tri clamp pipe alignment tool large 5-inch to 12-inch diameter. Durable steel frame ideal for jobsite use and in shop use. Compare to sumner manufacturing company ultra clamp made in the usa. Strong and lightweight for increased productivity and long tool life.

 

Apollo PEX One Hand Cinch Clamp Tool 69PTBJ0010C

Apollo PEX One Hand Cinch Clamp Tool 69PTBJ0010C

Apollo PEX One Hand Cinch Clamp Tool 69PTBJ0010C - One handed ratcheting. Led light signals completed fasten. Meets astm f2098 standard. Works on 3/8, 1/2, 3/4 and 1 inch cinch clamps.

 

The Original Welders 3rd Hand Pipe Welding Tool Line up Clamp

The Original* Welders 3rd Hand Pipe Welding Tool Line up Clamp

The Original* Welders 3rd Hand Pipe Welding Tool Line up Clamp - Manufactured by a life-long welder/welding inspector/inventor in new orleans, la, and used throughout the oilfield, the welders 3rd hand tool is small, portable, and adjustable. Patent protected. The original welders 3rd hand is a “one man pipe welding tool that just makes sense”. It is easy to understand and use if you are a pipe welder or fitter, you will greatly appreciate the applications of this tool.

 

SharkBite  23081 Standard Handles PEX Clamp Tool

SharkBite 23081 Standard Handles PEX Clamp Tool

SharkBite 23081 Standard Handles PEX Clamp Tool - The sharkbite connection system includes a line of rugged tools and quality accessories that help ensure a dependable trouble-free installation of pex/barb plumbing systems. The line includes everything needed for making clamp ring or crimp ring connections, plus a complete range of clamp and crimp rings in 1/4″ to 1″ sizes, cutters, gauges and removal tools. .

 

IWISS 10 PCS 12-inch PEX Stainless Steel Clamp Cinch Rings Crimp Pinch Fitting Tools

IWISS 10 PCS 1/2-inch PEX Stainless Steel Clamp Cinch Rings Crimp Pinch Fitting Tools

IWISS 10 PCS 1/2-inch PEX Stainless Steel Clamp Cinch Rings Crimp Pinch Fitting Tools - Listed to astm f2098. Safe for potable water and radiant floor heating. 10 pcs 1/2″ stainless pex pinch clamps.

 

Pro Remote action radiator hose clips  clamps 18mm - 50mm removal tool AT128

Pro Remote action radiator hose clips / clamps 18mm – 50mm removal tool AT128

Pro Remote action radiator hose clips / clamps 18mm – 50mm removal tool AT128 - Flexible cable and compact head makes the tool suitable to be used in very confined spaces. Ratchet action. Simply open the clip with the tool and lock it off with the lever and the clip remains open with you having to hold the tool. Simple to use and can be used one handed so you can pull the hose off with the other hand. Total length of the hose clamp tool 600mm. Suitable for clamps 18mm to 50mm. Ideal for removing self tightening hose clamps / clips. Long reach tool makes it easy to remove hard to reach clips.

 

IWISS PEX Cinch Crimping Tool for Clamps Sizes from 38 to 1 with 20pcs 12 and 10 pcs 34 Stainless Steel Pex Clamps Crimp Crimper Suit Sharkbite Watts Apollo and All US F2098 Standards

IWISS PEX Cinch Crimping Tool for Clamps Sizes from 3/8″ to 1″ with 20pcs 1/2″ and 10 pcs 3/4″ Stainless Steel Pex Clamps Crimp Crimper Suit Sharkbite, Watts, Apollo and All US F2098 Standards

IWISS PEX Cinch Crimping Tool for Clamps Sizes from 3/8″ to 1″ with 20pcs 1/2″ and 10 pcs 3/4″ Stainless Steel Pex Clamps Crimp Crimper Suit Sharkbite, Watts, Apollo and All US F2098 Standards - Used with stainless steel clamps to make pex connections. This tool can be used with any astm f2098 stainless steel clamps from any manufacturer. Fits all pex cinch clamps except for zurn quick clamp. This tool is factory adjusted and does not require any additional calibration or adjustment. This tool is universal and will work with stainless steel clamps of sizes 3/8″, 1/2″, 5/8″, 3/4″ and 1″.

 

IWISS PEX CINCH Crimping Tool Crimper for Stainless Steel Clamps from 38to 1 with 12 20PCS and 34 10PCS SS PEX Clamps

IWISS PEX CINCH Crimping Tool Crimper for Stainless Steel Clamps from 3/8″to 1″ with 1/2″ 20PCS and 3/4″ 10PCS SS PEX Clamps

IWISS PEX CINCH Crimping Tool Crimper for Stainless Steel Clamps from 3/8″to 1″ with 1/2″ 20PCS and 3/4″ 10PCS SS PEX Clamps - This tool is factory adjusted and does not require any additional calibration or adjustment. This tool can be used with any astm f2098 stainless steel clamps from any manufacturer. Used with stainless steel clamps to make pex connections. This tool is universal and will work with stainless steel clamps of sizes 3/8″, 1/2″, 5/8″, 3/4″ and.

 

6 Pcs 7 Wood Working Clamps Tools Wood Handscrew 7

6 Pcs 7″ Wood Working Clamps Tools Wood Handscrew “7”

6 Pcs 7″ Wood Working Clamps Tools Wood Handscrew “7” - 6 pcs 7 wood working clamps tools wood handscrew “7” set of 6 7″ wood clamps woodworking clamps 3-1/4″ deep x 3-1/4″ open wide”.

 

V-Slot Jewelers Bench Pin Filing Block Anvil Clamp Tool

V-Slot Jewelers Bench Pin Filing Block Anvil Clamp Tool

V-Slot Jewelers Bench Pin Filing Block Anvil Clamp Tool - New v-slot bench pin this is a new v-slot bench pin used as support for filing, sawing and drilling clamp fits any work surface up to 2″ (51 mm) thick the board measures approximately 7 1/4″ x 2 1/4″ x 1/2″ (184 x 57 x 13 mm).





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.