Top 19 Best Skew Chisels

 

14 Skew Chisel

1/4″ Skew Chisel

1/4″ Skew Chisel - Factory sharpened and ready for use. Overall length of the tools is 4-3/4″. The design of the tool keeps your fingers close to the cutting edge and the half-round palm-grip handle features a flat spot that keeps it from rolling off your bench. This 1/4″ skew chisel features a hardwood handle with a metal ferrule.

 

34 Robert Sorby 540 Right Sheaf River Skew Chisel

3/4″ Robert Sorby #540 Right Sheaf River Skew Chisel

3/4″ Robert Sorby #540 Right Sheaf River Skew Chisel - The handles are made from certified sustainable american ash, combining high tensile strength and resilience with long-term timber sustainability and availability. The rounded handle is matched to tapered bolster and ferrule for a clean, elegant look, and a very comforatble feel in use. 5 of micron, four times sharper than a disposable razor. Chisels have 5-5/8″ long blades (including bolster) and 4-3/4″ handles, for an overall length of approximately 10-3/8″. Each chisel is also diamond hardness tested, guaranteeing not one single tool leaves the factory without inspection. Named after the river sheaf, sheffield’s endearing testimony to the steel industry, these bench chisels have been designed with environmental considerations at heart, while still maintaining the same legendary robert sorby quality. Though sold individually, most users typically buy skew chisels in pairs ( one left, one right). This exceptional material allows blades to be sharpened to 0. Made in england as part of sorby’s sheaf river line, this chisel is manufactured from the finest sheffield steel, with enduring attention to detail, each blade of sorby’s sheaf river chisel series is made from a drop stamped, high carbon blank incorporating a specially formulated alloy to ensure a perfect balance of steel strength and edge retention. The angled point of this 3/4″ right skew edge bench chisel from robert sorby makes it ideal for getting into corners and tight quarters, precisely paring joints, particularly dovetails, and other detailed finshing work it is capable of shearing through the toughest wood, especially tough end grain or unruly figured grain, with less fuss and less effort than a regular bench chisel.

 

Pinnacle Cryogenic 1 Oval Skew Chisel

Pinnacle Cryogenic 1″ Oval Skew Chisel

Pinnacle Cryogenic 1″ Oval Skew Chisel - Manufactured in sheffield exclusively for woodcraft, these cryogenically treated turning tools offer many of the characteristics of powdered metal tools, without the cost. Blade length is 6- 1/2″, handle length 10- 1/8″, overall length 16- 3/8″. Used much like a traditional skew chisel for beading and finish cuts, the rounded sides allow for easy movement across the tool rest. The cryogenic treatment process utilizes sub-zero temperatures, down to -300°f, creating a more uniform grain structure that allows you to hone to a fine edge providing you with a tool that will hold an edge that will last 2-3 times longer that standard tools. Each tool is mounted in a european ash wood handle.

 

12 Robert Sorby 810H Skew Chisel

1/2″ Robert Sorby #810H Skew Chisel

1/2″ Robert Sorby #810H Skew Chisel - This 6 piece carving set is manufactured by small tool maker in czech republic. Handles are oiled european beech with ergonomic octagonal cross section. Set includes straight skew, curved straight, 2 curves skews, curves v tool and curved gouge. Comes in retail packaging. All chisels blades are made from hardened highly allowed cr-mn steel and heat treated to hrc 55.

 

Narex Lathe Wood Turning Double Bevel Skew Chisel 4 mm x 14 mm x 105 mm Blade Alloyed Tool Steel 60 HRc 817110

Narex Lathe Wood Turning Double Bevel Skew Chisel 4 mm x 14 mm x 105 mm Blade Alloyed Tool Steel 60 HRc 817110

Narex Lathe Wood Turning Double Bevel Skew Chisel 4 mm x 14 mm x 105 mm Blade Alloyed Tool Steel 60 HRc 817110 - Handles are natural varnished european beech wood. Blades are heat treated allow tool steel and hardened to hrc 60 and will hold an excellent edge. This lathe tool is made by a small tool manufacturer in the czech republic. Straight chisel blade is 4 mm (3/16″) thick by 14 mm (9/16″) wide by 105 mm (425″) long. Overall length of tool is 345 mm (14″).

 

Robert Sorby Micro Skew Chisel Blade

Robert Sorby Micro Skew Chisel Blade

Robert Sorby Micro Skew Chisel Blade - Exceptional quality tools from crown hand tools ltd, sheffield, england. Rosewood handle. Made from m2 high speed steel (rockwell 62/64). Gives up to 6 times the edge life of carbon tools.

 

Carter Son Toolworks ½ Skew Chisel

Carter & Son Toolworks ½” Skew Chisel

Carter & Son Toolworks ½” Skew Chisel - Can sharpen easily by grinding on the flat surface. Unique profile allows for smooth non-binding cutting with ultimate control. The m2 high speed steel blades outlasts high carbon steel 6-to-1, and will give you years of use. 1/2-inch chisel with 7-inch handle and 5-inch blade. 3/4-inch chisel with 9-inch handle and 6-inch blade.

 

14 Robert Sorby 864H Micro Skew Chisel

1/4″ Robert Sorby #864H Micro Skew Chisel

1/4″ Robert Sorby #864H Micro Skew Chisel - High speed steel (hss) blade. Made in england. Ash handle. A small skew sized for the delicacy and control required for smaller projects and fine detail work. Skew has a 6-1/4″ handle and is 10″ long overall.

 

Narex Right Left 20 mm 1316 Skew Paring Chisels 811120811170

Narex Right & Left 20 mm 13/16″ Skew Paring Chisels 811120/811170

Narex Right & Left 20 mm 13/16″ Skew Paring Chisels 811120/811170 - Handles are made from super hard european hornbeam. Made by a small tool manufacturer in the czech republic. Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to rc 59. Contains both right and left skew chisel 20 mm 13/16″ wide. Bevel ground at 30 degree skew and a 25 degree bevel.

 

Narex Right Left 6 mm 14 Skew Paring Chisels 811106811156

Narex Right & Left 6 mm 1/4″ Skew Paring Chisels 811106/811156

Narex Right & Left 6 mm 1/4″ Skew Paring Chisels 811106/811156 - Contains both right and left skew chisel 6 mm 1/4″ wide. Bevel ground at 30 degree skew and a 25 degree bevel. Made by a small tool manufacturer in the czech republic. Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to rc 59. Handles mades from super hard european hornbeam.

 

Flexcut FR407 58 Palm Skew Chisel

Flexcut FR407 5/8″ Palm Skew Chisel

Flexcut FR407 5/8″ Palm Skew Chisel - . The fixed handle version allows for the faster tool changes over the unhandled tools, which need to be used with an interchangeable handle. Lexcut’s fixed handled palm tools are constructed from solid ash and high carbon steel.

 

Crown 270W 12-Inch Skew Chisel

Crown 270W 1/2-Inch Skew Chisel

Crown 270W 1/2-Inch Skew Chisel - High speed steel. Rockwell 62/64. Exceptional quality tools from crown hand tools ltd, sheffield, england. Lasts up to 6 times as long as carbon tools. Made with heavy duty brass ferrules.

 

Hurricane Turning Tools Woodturning Three Piece Skew Chisel Set 12 Skew Chisel 1 Skew Chisel 1 12 Skew Chisel High Speed Steel

Hurricane Turning Tools, Woodturning Three Piece Skew Chisel Set, 1/2″ Skew Chisel, 1″ Skew Chisel, 1 1/2″ Skew Chisel, High Speed Steel

Hurricane Turning Tools, Woodturning Three Piece Skew Chisel Set, 1/2″ Skew Chisel, 1″ Skew Chisel, 1 1/2″ Skew Chisel, High Speed Steel - Ships ready to be sharpened. They are made out of high speed steel for superior edge holding ability and will last 8x longer between sharpenings as compared to carbon steel. The handles are made from solid ash. This set consists of three separate woodturning skew chisels made from high speed steel. In addition to the high quality steel, hurricane turning tools have extra long handles, some as long at 16 inches. Compare these tools to others that sell for two to three times the price. These tools compare with any hss tool on the market and are sold throughout the world. Hurricane turning tools are made in one of the world’s largest turning tool factories.

 

Crown 271 1-Inch 25-mm Standard Skew Chisel

Crown 271 1-Inch 25-mm Standard Skew Chisel

Crown 271 1-Inch 25-mm Standard Skew Chisel - Gives up to 6 times the edge life of carbon tools. Made from m2 high speed steel (rockwell 62/64). Exceptional quality tools from crown hand tools ltd, sheffield, england. Rosewood handle.

 

Narex Pair Right Left 12 mm 12 Skew Paring Chisels in Wooden Presentation Box 851662

Narex Pair Right & Left 12 mm 1/2″ Skew Paring Chisels in Wooden Presentation Box 851662

Narex Pair Right & Left 12 mm 1/2″ Skew Paring Chisels in Wooden Presentation Box 851662 - Handles made from super hard european hornbeam. Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to rc 59. Pair of chisels comes in a wooden presentation box. Bevel ground at 30 degree skew and a 25 degree bevel. Contains both right and left skew chisel 12 mm 1/2″ wide.

 

Narex Pair Right Left 6 mm 14 Skew Paring Chisels in Wooden Presentation Box 851656

Narex Pair Right & Left 6 mm 1/4″ Skew Paring Chisels in Wooden Presentation Box 851656

Narex Pair Right & Left 6 mm 1/4″ Skew Paring Chisels in Wooden Presentation Box 851656 - Handles made from super hard european hornbeam. Bevel ground at 30 degree skew and a 25 degree bevel. Blades are made from fine-grained, nicely tempered chrome-manganese steel and hardened to rc 59. Contains both right and left skew chisel 6 mm 1/4″ wide. Packaged in a wooden presentation box.

 

PFEIL Swiss Made 1 Double Bevel Skew Chisel 8mm

PFEIL “Swiss Made” #1 Double Bevel Skew Chisel, 8mm

PFEIL “Swiss Made” #1 Double Bevel Skew Chisel, 8mm - Pfeil carving tools and sets are “swiss made”. Pfeil is undoubtedly the finest carving tool on the market, second-to-none in terms of manufacturing quality and durability. “Swiss made” implies reliability and precision. This skew-cut profile chisel is a double beveled grind with two rounded heels that allow the rocking motion necessary in controlling depth of cut.

 

Sorby B809253 Oval Skew Chisel 1-Inch

Sorby B809253 Oval Skew Chisel, 1-Inch

Sorby B809253 Oval Skew Chisel, 1-Inch - Delicately balanced skew chisels feature oval profiles for gliding effortlessly along the tool rest for smoothing cylinders, cleaning end grain and cutting shallow curves, beads, pummels and v-cuts. Size 1″.

 

Narex Lathe Wood Turning Left Bevel Skew Chisel 4 mm X 14 mm X 105 mm Blade Alloyed Tool Steel 60 Hrc 817810

Narex Lathe Wood Turning Left Bevel Skew Chisel 4 mm X 14 mm X 105 mm Blade Alloyed Tool Steel 60 Hrc 817810

Narex Lathe Wood Turning Left Bevel Skew Chisel 4 mm X 14 mm X 105 mm Blade Alloyed Tool Steel 60 Hrc 817810 - Handles are natural varnished european beech wood. Blades are heat treated allow tool steel and hardened to hrc 60 and will hold an excellent edge. Left bevel skew chisel blade is 4 mm (3/16″) thick by 14 mm (9/16″) wide by 105 mm (425″) long. Overall length of tool is 345 mm (14″). This lathe tool is made by a small tool manufacturer in the czech republic.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.