Top 20 Chamfer End Mills

 

MariTool Chamfer Mill 125 Dia X 60 Degree 4 Flute Double End Made in USA 3500-125-60DEG

MariTool Chamfer Mill .125 Dia X 60 Degree 4 Flute Double End, Made in USA 3500-.125-60DEG

MariTool Chamfer Mill .125 Dia X 60 Degree 4 Flute Double End, Made in USA 3500-.125-60DEG - 2-1/2 overall length. Number of flutes 4|centercutting yes|double ended yes|coating tialn|shank size 125|total length 150|included angle 60 degrees (30 deg per side)|material solid micrograin carbide. 4 flutes. 120 degree. 1/4 shank diameter.

 

Niagara Cutter N42331 Cobalt Steel End Mill Truncated Rougher-Finisher For Aluminum TiAlN Coated 3 Flutes Chamfer End 2-12 Cutting Length 58 Cutting Diameter

Niagara Cutter N42331 Cobalt Steel End Mill, Truncated Rougher-Finisher For Aluminum, TiAlN Coated, 3 Flutes, Chamfer End, 2-1/2″ Cutting Length, 5/8″ Cutting Diameter

Niagara Cutter N42331 Cobalt Steel End Mill, Truncated Rougher-Finisher For Aluminum, TiAlN Coated, 3 Flutes, Chamfer End, 2-1/2″ Cutting Length, 5/8″ Cutting Diameter - 3 flute design makes these perfect for finishing work. Titanium aluminum nitride (tialn) combines high thermal stability with excellent hardness for abrasion resistance and a low coefficient of friction, for lubricity. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Cobalt roughing end mill for working on aluminum and non-ferrous materials. Center cutting end mills are designed with “end teeth” making these ideal for applications such as profiling and slotting.

 

Niagara Cutter N76593 Carbide Chamfering Mill TiAlN Coated 2 Flutes 90 Degree Chamfer End 18 Cut Cutting Length 14 Diameter

Niagara Cutter N76593 Carbide Chamfering Mill, TiAlN Coated, 2 Flutes, 90 Degree Chamfer End, 1/8″ Cut Cutting Length, 1/4″ Diameter

Niagara Cutter N76593 Carbide Chamfering Mill, TiAlN Coated, 2 Flutes, 90 Degree Chamfer End, 1/8″ Cut Cutting Length, 1/4″ Diameter - Titanium aluminum nitride (tialn), combines high thermal stability with excellent hardness for abrasion resistance and a low coefficient of friction, for lubricity. Features a fine-pitch rougher with chamfer. 2 flute design makes these ideal for plung cutting when chip removal is not a problem. Center cutting end mills are designed with “end teeth” making these ideal for slotting and cavity applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

38 Chamfer End Mill Carbide - 10 pieces

3/8″ Chamfer End Mill Carbide – 10 pieces

3/8″ Chamfer End Mill Carbide – 10 pieces - 3750 (3/8) substrate, carbide. 45° chamfering end mill, made in the usa. Flutes, 2 perpendicular angle, 45° included angle, 90° shank diameter -.

 

Bassett MCH-2R Series Solid Carbide End Mill Uncoated Bright Finish 2 Flute 60 Degrees Profile Angle Chamfer End 06 Cutting Length 38 Cutting Diameter 2-12 Length Pack of 1

Bassett MCH-2R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 2 Flute, 60 Degrees Profile Angle, Chamfer End, 0.6″ Cutting Length, 3/8″ Cutting Diameter, 2-1/2″ Length (Pack of 1)

Bassett MCH-2R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 2 Flute, 60 Degrees Profile Angle, Chamfer End, 0.6″ Cutting Length, 3/8″ Cutting Diameter, 2-1/2″ Length (Pack of 1) - Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Applicable for steel, cast iron, nonferrous material. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.

 

CGC Tools GMHX38C4 Gorilla Sasquatch GMX-35 Coated RougherFinisher Carbide End Mill Weldon Flat 4 Flute 38 Diameter 78 LOC 2-12 OAL 0015 to 0020 Chamfer

CGC Tools GMHX38C4 Gorilla Sasquatch GMX-35 Coated Rougher/Finisher Carbide End Mill, Weldon Flat, 4 Flute, 3/8″ Diameter, 7/8″ LOC, 2-1/2″ OAL, 0.015″ to 0.020″ Chamfer

CGC Tools GMHX38C4 Gorilla Sasquatch GMX-35 Coated Rougher/Finisher Carbide End Mill, Weldon Flat, 4 Flute, 3/8″ Diameter, 7/8″ LOC, 2-1/2″ OAL, 0.015″ to 0.020″ Chamfer - Sasquatch, rougher/finisher, 4 flute, 3/8″ diameter, 7/8″ length of cut, 2-1/2″ overall length, 015-020″ chamfer, weldon flat, gmx-35 coated. Gmp edge prepped to hone the “ridges” to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish. Highest transverse rupture strength (trs) nano-grain carbide substrate available and completely resharpenable. Engineered using gorilla mill technology, extremely high material removal rates and superb finish for aggressive applications in all materials.

 

Kodiak Cutting Tools KCT254588 USA Made Double End Solid Carbide Chamfer Mill AlTiN Coated 100 Degree 4 Flute 316 Shank 316 Diameter 2-12 Overall Length

Kodiak Cutting Tools KCT254588 USA Made Double End Solid Carbide Chamfer Mill, AlTiN Coated, 100 Degree, 4 Flute, 3/16″ Shank, 3/16″ Diameter, 2-1/2″ Overall Length

Kodiak Cutting Tools KCT254588 USA Made Double End Solid Carbide Chamfer Mill, AlTiN Coated, 100 Degree, 4 Flute, 3/16″ Shank, 3/16″ Diameter, 2-1/2″ Overall Length - . 3/16 inch diameter solid carbide chamfer mill 3/16″ shank 2-1/2″ overall length 4 flute 100 degree carbide, chamfer mill.

 

Niagara Cutter N76590 Carbide Chamfering Mill TiAlN Coated 2 Flutes 60 Degree Chamfer End 316 Cut Cutting Length 14 Diameter

Niagara Cutter N76590 Carbide Chamfering Mill, TiAlN Coated, 2 Flutes, 60 Degree Chamfer End, 3/16″ Cut Cutting Length, 1/4″ Diameter

Niagara Cutter N76590 Carbide Chamfering Mill, TiAlN Coated, 2 Flutes, 60 Degree Chamfer End, 3/16″ Cut Cutting Length, 1/4″ Diameter - Center cutting end mills are designed with “end teeth” making these ideal for slotting and cavity applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. 2 flute design makes these ideal for plung cutting when chip removal is not a problem. Titanium aluminum nitride (tialn), combines high thermal stability with excellent hardness for abrasion resistance and a low coefficient of friction, for lubricity. Features a fine-pitch rougher with chamfer.

 

CGC Tools GMHX38CS4 Gorilla Sasquatch GMX-35 Coated RougherFinisher Carbide End Mill Stub Length Weldon Flat 4 Flute 38 Diameter 916 LOC 2 OAL 0015 to 0020 Chamfer

CGC Tools GMHX38CS4 Gorilla Sasquatch GMX-35 Coated Rougher/Finisher Carbide End Mill, Stub Length, Weldon Flat, 4 Flute, 3/8″ Diameter, 9/16″ LOC, 2″ OAL, 0.015″ to 0.020″ Chamfer

CGC Tools GMHX38CS4 Gorilla Sasquatch GMX-35 Coated Rougher/Finisher Carbide End Mill, Stub Length, Weldon Flat, 4 Flute, 3/8″ Diameter, 9/16″ LOC, 2″ OAL, 0.015″ to 0.020″ Chamfer - Highest transverse rupture strength (trs) nano-grain carbide substrate available and completely resharpenable. Gmp edge prepped to hone the “ridges” to reduce fracturing during the milling process while greatly increasing tool life and enhancing finish. Engineered using gorilla mill technology, extremely high material removal rates and superb finish for aggressive applications in all materials. Sasquatch, rougher/finisher, stub, 4 flute, 3/8″ diameter, 9/16″ length of cut, 2″ overall length, 015-020″ chamfer, weldon flat, gmx-35 coated.

 

14 Hex Shank HCS 90 Degree 5 Flute 12mm16mm19mm Chamfer Chamfering End Mill Cutter Bit Countersink Set 3PcsSet

1/4″ Hex Shank HCS 90 Degree 5 Flute 12mm/16mm/19mm Chamfer Chamfering End Mill Cutter Bit Countersink Set 3Pcs/Set

1/4″ Hex Shank HCS 90 Degree 5 Flute 12mm/16mm/19mm Chamfer Chamfering End Mill Cutter Bit Countersink Set 3Pcs/Set - Noteplease do not use this chamfer on the metal material. 1/4″ round shank fits all handheld and stationary drills. Precision-ground 90 degree tip for countersinking into wood plate or thin plastic plate. Five flute design reduces vibration for smoother drilling and extended life. Material high carbon steel.

 

Bassett MCH-2D Series Solid Carbide End Mill Uncoated Bright Finish 2 Flute 90 Degrees Profile Angle Chamfer End 036 Cutting Length 14 Cutting Diameter 2-12 Length Pack of 1

Bassett MCH-2D Series Solid Carbide End Mill, Uncoated (Bright) Finish, 2 Flute, 90 Degrees Profile Angle, Chamfer End, 0.36″ Cutting Length, 1/4″ Cutting Diameter, 2-1/2″ Length (Pack of 1)

Bassett MCH-2D Series Solid Carbide End Mill, Uncoated (Bright) Finish, 2 Flute, 90 Degrees Profile Angle, Chamfer End, 0.36″ Cutting Length, 1/4″ Cutting Diameter, 2-1/2″ Length (Pack of 1) - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Applicable for steel, cast iron, nonferrous material.

 

MariTool Chamfer Mill 125 Dia X 82 Degree 4 Flute Double End Made in USA 3500-125-82DEG

MariTool Chamfer Mill .125 Dia X 82 Degree 4 Flute Double End, Made in USA 3500-.125-82DEG

MariTool Chamfer Mill .125 Dia X 82 Degree 4 Flute Double End, Made in USA 3500-.125-82DEG - Number of flutes 4|centercutting yes|double ended yes|coating tialn|material solid micrograin carbide|shank size 125|total length 15|included angle 82 degrees (41 deg per side). Round shanks allow use with a wide variety of toolholding systems. 90 degree helix angle. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

Niagara Cutter N76597 Carbide Chamfering Mill TiAlN Coated 4 Flutes 60 Degree Chamfer End 516 Cut Cutting Length 38 Diameter

Niagara Cutter N76597 Carbide Chamfering Mill, TiAlN Coated, 4 Flutes, 60 Degree Chamfer End, 5/16″ Cut Cutting Length, 3/8″ Diameter

Niagara Cutter N76597 Carbide Chamfering Mill, TiAlN Coated, 4 Flutes, 60 Degree Chamfer End, 5/16″ Cut Cutting Length, 3/8″ Diameter - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Center cutting end mills are designed with “end teeth” making these ideal for slotting and cavity applications. Features a fine-pitch rougher with chamfer. 4 flute design for creating finer finishes and a highter metal removal rate. Titanium aluminum nitride (tialn), combines high thermal stability with excellent hardness for abrasion resistance and a low coefficient of friction, for lubricity.

 

Titan TC88110 Solid Carbide Chamfer Mill 4 Flute Double End 60 degree Angle AlTiN Coated 18 Size 18 Shank Diameter 2 Overall Length

Titan TC88110 Solid Carbide Chamfer Mill, 4 Flute, Double End, 60 degree Angle, AlTiN Coated, 1/8″ Size, 1/8″ Shank Diameter, 2″ Overall Length

Titan TC88110 Solid Carbide Chamfer Mill, 4 Flute, Double End, 60 degree Angle, AlTiN Coated, 1/8″ Size, 1/8″ Shank Diameter, 2″ Overall Length - 4 flute double end. Premium sub-microgran solid carbide. Made in usa. Altin coated.

 

Haimer F1005LLL14ZCAA Power Chamfer End Mill 5 Flutes 14

Haimer F1005LLL1/4ZCAA Power Chamfer End Mill, 5 Flutes, 1/4″

Haimer F1005LLL1/4ZCAA Power Chamfer End Mill, 5 Flutes, 1/4″ - Power mill, Ø 1/4″, carbide, 5fl, corner chamfer, altin, variable helix, w/ safe-lock.

 

Niagara Cutter N76591 Carbide Chamfering Mill TiAlN Coated 2 Flutes 60 Degree Chamfer End 516 Cut Cutting Length 38 Diameter

Niagara Cutter N76591 Carbide Chamfering Mill, TiAlN Coated, 2 Flutes, 60 Degree Chamfer End, 5/16″ Cut Cutting Length, 3/8″ Diameter

Niagara Cutter N76591 Carbide Chamfering Mill, TiAlN Coated, 2 Flutes, 60 Degree Chamfer End, 5/16″ Cut Cutting Length, 3/8″ Diameter - 2 flute design makes these ideal for plung cutting when chip removal is not a problem. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Features a fine-pitch rougher with chamfer. Center cutting end mills are designed with “end teeth” making these ideal for slotting and cavity applications. Titanium aluminum nitride (tialn), combines high thermal stability with excellent hardness for abrasion resistance and a low coefficient of friction, for lubricity.

 

Champion Cutting Tool XLVC-14 High Performance Tiain Coated End Mills with 45-Degree Chamfer

Champion Cutting Tool XLVC-1/4 High Performance Tiain Coated End Mills with 45-Degree Chamfer

Champion Cutting Tool XLVC-1/4 High Performance Tiain Coated End Mills with 45-Degree Chamfer - Manufactured from sub-micron carbide, and tiain coated for superior performance. Four flute end mills which features heavy duty core and end geometry for high volume material removal rates. Ideal for machining small and large parts in the aerospace, medical and automotive industries. Chatter-free machining in a wide range of materials including cast irons, stainless steel, titanium alloy, carbon alloy, and high temp alloys. A true multi-purpose end mill ideal for slotting, sidemilling, semi-finishing, and finishing.

 

In-tool-home Heavy Duty Industrial Countersink Drill Bit Set Woodworking Chamfer End Mill Cutter Tool Set of 5

In-tool-home Heavy Duty Industrial Countersink Drill Bit Set Woodworking Chamfer End Mill Cutter Tool Set of 5

In-tool-home Heavy Duty Industrial Countersink Drill Bit Set Woodworking Chamfer End Mill Cutter Tool Set of 5 - Materialhss4341 5 flute and 82 degree point angle 1/4″ tri-flat shank for easy grip head size 1/4″, 3/8″, 1/2″, 5/8″, 3/4″ (length 7/32″) cut quickly and easily in soft metal, wood, rubber, plastic and other machinable materials package include5 x 82 degree countersink drill bits.

 

Niagara Cutter N76596 Carbide Chamfering Mill TiAlN Coated 4 Flutes 60 Degree Chamfer End 316 Cut Cutting Length 14 Diameter

Niagara Cutter N76596 Carbide Chamfering Mill, TiAlN Coated, 4 Flutes, 60 Degree Chamfer End, 3/16″ Cut Cutting Length, 1/4″ Diameter

Niagara Cutter N76596 Carbide Chamfering Mill, TiAlN Coated, 4 Flutes, 60 Degree Chamfer End, 3/16″ Cut Cutting Length, 1/4″ Diameter - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Titanium aluminum nitride (tialn), combines high thermal stability with excellent hardness for abrasion resistance and a low coefficient of friction, for lubricity. 4 flute design for creating finer finishes and a highter metal removal rate. Features a fine-pitch rougher with chamfer. Center cutting end mills are designed with “end teeth” making these ideal for slotting and cavity applications.

 

Bassett MCH-2R Series Solid Carbide End Mill Uncoated Bright Finish 2 Flute 90 Degrees Profile Angle Chamfer End 015 Cutting Length 18 Cutting Diameter 1-12 Length Pack of 1

Bassett MCH-2R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 2 Flute, 90 Degrees Profile Angle, Chamfer End, 0.15″ Cutting Length, 1/8″ Cutting Diameter, 1-1/2″ Length (Pack of 1)

Bassett MCH-2R Series Solid Carbide End Mill, Uncoated (Bright) Finish, 2 Flute, 90 Degrees Profile Angle, Chamfer End, 0.15″ Cutting Length, 1/8″ Cutting Diameter, 1-1/2″ Length (Pack of 1) - Applicable for steel, cast iron, nonferrous material. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.