Top 22 Best Rail Stiles

 

Yonico 12432 Cabinet Door Router 4 Bit Set with Rail Stile Panel Raiser and Glue Joint 12-Inch Shank

Yonico 12432 Cabinet Door Router 4 Bit Set with Rail, Stile Panel Raiser and Glue Joint 1/2-Inch Shank

Yonico 12432 Cabinet Door Router 4 Bit Set with Rail, Stile Panel Raiser and Glue Joint 1/2-Inch Shank - Set comes in a solid wood storage case. The glue joint bit will rout both joining cuts. Use the reversible glue joint bit for gluing up multiple boards to extend panel width. Then, run one cut face up and the adjoining cut face down creating a perfect joint. For use with up to 1″ stock. Rail and stile bits create a perfect round-over rail & stile door frame. Simply set the center of the bit with the center of your stock. Two flute carbide cutters & 1/2″ shanks. Fully enclosed ball bearing guides allow for precise cuts without the use of a fence. The panel raiser puts a classic ogee edge on the central panel of your door. . Make professional raised panel cabinet doors with the yonico 12432, 4 bit router bit set.

 

Yonico 12201 Rail and Stile Plywood Conversion Kit for 52mm Plywood

Yonico 12201 Rail and Stile Plywood Conversion Kit for 5.2mm Plywood

Yonico 12201 Rail and Stile Plywood Conversion Kit for 5.2mm Plywood - When using 1/4″ plywood for the panel, 1/4″ grooves will be too large as 1/4″ plywood is finished down to slightly less than 1/4″. Standard rail & stile router bits create 1/4″ grooves for the center panel. This set is compatible with • yonico 12241 • yonico 12243 • yonico 12243q • yonico 12249 • yonico 12335 • yonico 12336 • yonico 12338 • yonico 12343 • yonico 12345 • yonico 12350 • yonico 12432. The yonico 12201 rail and stile conversion kit to replaces the existing groove cutters on your yonico rail & stile router bit set. . ) Note this kit contains the 2 blades only. This conversion kit allows 1/4″ plywood (actual 5. The rail and stile bits must be purchased separately. (For 5. 2mm) to be used as center panels for rail & stile doors. 5mm plywood use yonico 12202 rail & stile conversion kit.

 

Freud Premier Adjustable Rail Stile Bit with 12 Shank - Shaker Profile 99-762

Freud Premier Adjustable Rail & Stile Bit with 1/2″ Shank – Shaker Profile (99-762)

Freud Premier Adjustable Rail & Stile Bit with 1/2″ Shank – Shaker Profile (99-762) - Ideal material thickness 5/8″ to 1-1/4″ stock. Cuts all composition materials, plywoods, hardwoods, and softwoods. Ticotm hi-density carbide to maximize bit life and material finish. Patented extended tenon capability, top portion of cutter, including bearing and spindle, is removed to produce the front of the long tenon profile. Unique cutter geometry to eliminate tearout.

 

Woodtek 821047 Router Bits Door Construction Stile Rail - Cabinet Rail Stile Set Cove Bead Detail 12 Shank

Woodtek 821047, Router Bits, Door Construction, Stile & Rail – Cabinet, Rail & Stile Set, Cove & Bead Detail, 1/2″ Shank

Woodtek 821047, Router Bits, Door Construction, Stile & Rail – Cabinet, Rail & Stile Set, Cove & Bead Detail, 1/2″ Shank - Imported. 001″ tolerances and dynamic balancing help ensure vibration-free operation. Cope and stick joinery for cabinet doors. Positive shear angle places less demand upon your routing equipment. The single piece design of this woodtek® carbide-tipped cove and bead with fillet stile and rail router bit set makes set-up more accurate, faster and easier, use with table-mounted portable routers rugged ptfe (polytetrafluoroethylene) briteviewâ„¢ coating not only protects but the bright yellow color provides better visibility for safer operations. Micro-grain carbide cutting surfaces have been diamond honed to 800 grit for minimal tear-out and smoother surface quality. Cnc-machining to +/-0. Manufactured in facilities meeting stringent iso 90002000 quality assurance standards.

 

BQLZR 12 Inch Shank 516 Inch Slot Width Cemented Carbide Rail Stile Finger Joint Glue Router Bit Cone Tenon Woodwork Cutter

BQLZR 1/2 Inch Shank 5/16 Inch Slot Width Cemented Carbide Rail & Stile Finger Joint Glue Router Bit Cone Tenon Woodwork Cutter

BQLZR 1/2 Inch Shank 5/16 Inch Slot Width Cemented Carbide Rail & Stile Finger Joint Glue Router Bit Cone Tenon Woodwork Cutter - If you have any questions about the item,please provide us the manufacturing part number for checking,your profits will be guaranteed. Perfect choice of professionals and hobbyists specification materialcemented carbide color silver & yellow brand name bqlzr shank dia 1/2 inch slot width 5/16 inch cutter width 35mm / 1. 38 inch cutter height 21mm / 0. 42 x 1. 3. Every product has a unique manufacturing part number label on the inner package that proves it has been qualified,which include part number,model number and inspection date information 2. Feature 1. Woodworking tools,suitable for use of trimming machine 4. 83 inch size 87 x 35 mm / 3. Cemented carbide constructed,1/2 inch shank diamater and 5/16 inch slot width 5. 38 inch (l x w ) weight132g package include 1 x cone tenon router bit.

 

Yonico 12249 Rail and Stile Router Bit Set with 12-Inch Shank 2-Piece

Yonico 12249 Rail and Stile Router Bit Set with 1/2-Inch Shank, 2-Piece

Yonico 12249 Rail and Stile Router Bit Set with 1/2-Inch Shank, 2-Piece - Satisfaction guaranteed and lifetime warranty. Build-up & heat resistant teflon coating. Solid hardened steel bodies with anti-kickback design. Industrial quality router bits. C3 micro-grain tungsten carbide cutters. Satisfaction guaranteed & lifetime warranty. Build-up and heat resistant teflon coating.

 

MLCS Cabinet Door 6 Piece Rail and Stile Shaper Cutter Set--Round Over Profile

MLCS Cabinet Door 6 Piece Rail and Stile Shaper Cutter Set–Round Over Profile

MLCS Cabinet Door 6 Piece Rail and Stile Shaper Cutter Set–Round Over Profile - Fits both 1/2″ and 3/4″ spindles. Set includes round over stile, 1/2″ straight, 1/4″ straight, rail for round over stile, 1/2″ straight, 1/4″ straight. 3/8″ depth of cut. For stock sizes 3/4″ to 1-1/4″. 2-7/8″ large diameter. Versatile 3-in-1 shaper cutters make rail and stile doors with wood and glass panels, as well as tongue and groove joints.

 

Yonico 12238 Rail and Stile Router Bits with Matched 2 Bit Quarter-round 12-Inch Shank

Yonico 12238 Rail and Stile Router Bits with Matched 2 Bit Quarter-round 1/2-Inch Shank

Yonico 12238 Rail and Stile Router Bits with Matched 2 Bit Quarter-round 1/2-Inch Shank - Manufactured from c3 micrograin carbide, our rail and stile bits make detailed, professional cuts resulting in an impressive finished product. Cut rail and stile easily with the yonico 12238 quarter round rail and stile router bit set. Rail and stile bits feature fully enclosed ball bearing guides producing precise cuts without the use of a fence. Set comes in a solid wood storage case. Two flute carbide cutters & 1/2″ shanks.

 

MLCS 8837 2-Piece Matched Rail and Stile Set Shaker Profile Router Bits

MLCS 8837 2-Piece Matched Rail and Stile Set Shaker Profile Router Bits

MLCS 8837 2-Piece Matched Rail and Stile Set Shaker Profile Router Bits - These cutters come as a matched 2 bit set so that the rail and stile match precisely. 1/2″ shank. 1-5/8″ large diameter. 2 flute, carbide-tipped. Cuts a 1/4″ thick x 3/8″ deep tongue on 3/4″ stock.

 

Sommerfelds 3 Piece Cove Raised Panel Set with our New Patented Chip-Free Roundover Rail Stile 12-Inch Shank

Sommerfeld’s 3 Piece Cove Raised Panel Set with our New Patented Chip-Free Roundover Rail & Stile, 1/2-Inch Shank

Sommerfeld’s 3 Piece Cove Raised Panel Set with our New Patented Chip-Free Roundover Rail & Stile, 1/2-Inch Shank - Full 1/2″ engagement on rail and stile for stronger joints and easier to measure drawer parts. New pantented chip-free design prevents edge tear-out. All bits are height matched for fast, no-hassle set-ups. Large 3-1/2″ diameter cove raised panel with backcutter. Machines material from 3/4″ to 7/8″ thick.

 

Yonico 12243q Rail and Stile Router Bits with 2 Bit Standard Ogee 14-Inch Shank

Yonico 12243q Rail and Stile Router Bits with 2 Bit Standard Ogee 1/4-Inch Shank

Yonico 12243q Rail and Stile Router Bits with 2 Bit Standard Ogee 1/4-Inch Shank - Yonico rail and stile router bits produce impressive and perfect results with every cut yielding years of woodworking satisfaction. Yonico rail and stile router bit set (12243q) will cut rail & stile for cabinet doors in the classic ogee design. Two flute carbide cutters & 1/4″ shanks. Fully enclosed ball bearing guides allow for precise rail and stile cuts without the use of a fence.

 

Infinity Tools 83-030 2-Piece Ogee Rail Stile Matched Shaper Cutter Set 34 Bore

Infinity Tools 83-030, 2-Piece Ogee Rail & Stile Matched Shaper Cutter Set, 3/4″ Bore

Infinity Tools 83-030, 2-Piece Ogee Rail & Stile Matched Shaper Cutter Set, 3/4″ Bore - 3-wing micro-grain carbide tips for a long life and repeated sharpening. Precision machined from fatigue-proof steel for extra strength. Silver ptfe coating reduces resin build-up for fast and easy cleaning. 3/4″ bore x 2-5/8″ cutter diam x 3/8″ profile width. For 3/4″ to 1-1/4″ thick material.

 

MLCS 11009 Katana Round Over Matched Rail and Stile Shaper Cutter 2-Piece Set

MLCS 11009 Katana Round Over Matched Rail and Stile Shaper Cutter, 2-Piece Set

MLCS 11009 Katana Round Over Matched Rail and Stile Shaper Cutter, 2-Piece Set - Precise, reliable woodworking. Life time guarantee. 1/2-inch reducer bushings included. 2-piece matched set. Tungsten micro-carbide tipped, diamond honed.

 

Yonico 12430 Rail and Stile Cabinet Door Router Bit Set with 4 Bit Ogee 12-Inch Shank

Yonico 12430 Rail and Stile Cabinet Door Router Bit Set with 4 Bit Ogee 1/2-Inch Shank

Yonico 12430 Rail and Stile Cabinet Door Router Bit Set with 4 Bit Ogee 1/2-Inch Shank - Use the reversible glue joint bit for gluing up multiple boards to extend panel width. Two flute carbide cutters & 1/2″ shanks. The glue joint bit will rout both joining cuts. Included in this set ogee raised panel bit, 2 bit matched ogee rail & stile, reversible glue joint bit, allen wrench plus extra spacers, solid wood storage case. The raised panel bit puts a classic ogee edge on the central panel of your door. Fully enclosed ball bearing guides allow for precise cuts without the use of a fence. Then, run one cut face up and the adjoining cut face down creating a perfect joint. Make professional raised panel cabinet doors with the yonico 12430, 4 bit router bit set. Simply set the center of the bit with the center of your stock. Rail & stile bits create a perfectly matched rail & stile door frame. Set comes in a solid wood storage case. Use with up to 1″ stock.

 

Yonico 12343 Round Over Rail and Stile with Cove Panel Raiser 3 Bit Router Bit Set 12-Inch Shank

Yonico 12343 Round Over Rail and Stile with Cove Panel Raiser 3 Bit Router Bit Set 1/2-Inch Shank

Yonico 12343 Round Over Rail and Stile with Cove Panel Raiser 3 Bit Router Bit Set 1/2-Inch Shank - Solid hardened steel bodies with anti-kickback design. Build-up & heat resistant teflon coating. Build-up and heat resistant teflon coating. Industrial quality router bits. C3 micro-grain tungsten carbide cutters. Satisfaction guaranteed and lifetime warranty. Satisfaction guaranteed & lifetime warranty.

 

CMT 89150211 2-Piece Rail Stile Bit Set 12-Inch Shank 1-34-Inch Diameter Carbide-Tipped

CMT 891.502.11 2-Piece Rail & Stile Bit Set, 1/2-Inch Shank, 1-3/4-Inch Diameter, Carbide-Tipped

CMT 891.502.11 2-Piece Rail & Stile Bit Set, 1/2-Inch Shank, 1-3/4-Inch Diameter, Carbide-Tipped - Cmt bits were rated the best overall in comparison to other brand (test by wood magazine). Make rail and stile joints to buid your own doors use on router tables only. 2 sinterhip hi-density industrial chrome carbide cutting edges for long-lasting performance. Male & female bits for material from 23/32 to 7/8-inch thick 2-51/64-inch overall length. Clean, precise and well-crafted for strength ideal for jobs requiring perfectly matching profiles.

 

Freud 99-760 New Premier Adjustable Rail Stile Router Bit System 12-Inch Shank

Freud 99-760 New Premier Adjustable Rail & Stile Router Bit System, 1/2-Inch Shank

Freud 99-760 New Premier Adjustable Rail & Stile Router Bit System, 1/2-Inch Shank - Top portion of cutter, including bearing and spindle, is removed to produce the front of the long tenon profile for blind tenons, through tenons, or bridle joints. Adjustable shims enable both a tight fit when using plywood panels and the ability to use thick panels ( from 55mm to 635mm ) the unique cutter geometry virtually elimantes tearout. Bits feature freud’s perma-shield coating that reduces heat and pitch build up along with rust, and freud’s tico hi-density carbide to maximize bit life and material finish. Optional cutters are available for double profile doors (99-860) and glass panel doors (54-760) with variable thicknesses and long tenons for perfecting matching profiles on all doors because it’s the same set of router bits. Two router bits that create any door in 5/8-inch to 1-1/4-inch door thickness range.

 

Freud RS-A Profile Knives For Freud RS1000 Or RS2000 Rail And Stile Insert Shaper Cutter

Freud RS-A Profile Knives For Freud RS1000 Or RS2000 Rail And Stile Insert Shaper Cutter

Freud RS-A Profile Knives For Freud RS1000 Or RS2000 Rail And Stile Insert Shaper Cutter - Covered by freud’s limited lifetime warranty. Resharpenable micrograin carbide insert knives.

 

Yonico 12339q Rail and Stile with Panel Raiser Router Bit Set Cove 14-Inch Shank 3-Piece

Yonico 12339q Rail and Stile with Panel Raiser Router Bit Set Cove 1/4-Inch Shank, 3-Piece

Yonico 12339q Rail and Stile with Panel Raiser Router Bit Set Cove 1/4-Inch Shank, 3-Piece - Router bit measurements • rail & stile, 1-3/4″ diameter, 1″ cutter height, 2-7/8″ overall height, 3/8″ depth of cut, 7/8″ bearing diameter • panel raiser, 2-1/2″ diameter, 1/2″ cutter height, 2-7/16″ overall height, 1″ depth of cut, 1/2″ bearing diameter rail and stile bits create a perfectly matched rail and stile door frame. Bit shanks are 1/4″. The yonico 12339q door construction router bit set includes 1/4″ round over rail and stile bits and a 1/4″ cove panel raiser. The yonico 12339q router bit set comes in a solid wood storage case. The cove raised panel router bit cuts a stylish edge on the central panel of your door. Ball bearing guides allow you to make precise cuts without the use of a fence. For use with up to 1″ stock.

 

MLCS Stacked Rail and Stile Router Bit - Ogee Profile

MLCS Stacked Rail and Stile Router Bit – Ogee Profile

MLCS Stacked Rail and Stile Router Bit – Ogee Profile - 1/2″ shank. 2 flute, carbide-tipped with totally enclosed ball bearing guide. All that is required is to simply lower or raise the bit. For best results use only with your router mounted in a table. The easy way to make perfect rails and stiles with only one bit. Cut rails and stiles without having to reverse, switch or reassemble cutters, or without having to remove the bit from your router.

 

Freud Premier Adjustable Rail Stile Bit with 12 Shank - Round Over Bead Profile 99-763

Freud Premier Adjustable Rail & Stile Bit with 1/2″ Shank – Round Over Bead Profile (99-763)

Freud Premier Adjustable Rail & Stile Bit with 1/2″ Shank – Round Over Bead Profile (99-763) - Patented extended tenon capability, top portion of cutter, including bearing and spindle, is removed to produce the front of the long tenon profile. Cuts all composition materials, plywoods, hardwoods, and softwoods. Ideal material thickness 5/8″ to 1-1/4″ stock. Ticotm hi-density carbide to maximize bit life and material finish. Unique cutter geometry to eliminate tearout.

 

Agile-Shop 2pcs Rail Stile Router Bit Set with 12 inch Shank Shaker for Woodworking

Agile-Shop 2pcs Rail & Stile Router Bit Set with 1/2 inch Shank Shaker for Woodworking

Agile-Shop 2pcs Rail & Stile Router Bit Set with 1/2 inch Shank Shaker for Woodworking - Materials body, solid hardened steel blade, industrial grade micro grain carbide package includes 2 x router bits. For up to 7/8″ stock. Create your own beautiful shaker style cabinet doors using rail & stile router bit set. 1/2″ shanks.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.