Top 22 for Best Spiral O

 

LMT Onsrud 65-000 Solid Carbide Upcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 21 Degree Helix 1 Flute 20000 Overall Length 00625 Cutting Diameter 01250 Shank Diameter

LMT Onsrud 65-000 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.0625″ Cutting Diameter, 0.1250″ Shank Diameter

LMT Onsrud 65-000 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.0625″ Cutting Diameter, 0.1250″ Shank Diameter - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. Single flute, 21 degree angle. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

Amana Tool 18Dx14Shk Spiral O Plastic - 51454

Amana Tool 1/8″Dx1/4″Shk Spiral O Plastic – 51454

Amana Tool 1/8″Dx1/4″Shk Spiral O Plastic – 51454 - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. Single flute, 21 degree angle. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

LMT Onsrud 64-026 Solid Carbide Downcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 21 Degree Helix 1 Flute 30000 Overall Length 02500 Cutting Diameter 02500 Shank Diameter

LMT Onsrud 64-026 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter

LMT Onsrud 64-026 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Single flute, 21 degree angle. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

Amana Tool 51513 SC Spiral O Single Flute Plastic Cutting 14 D x 1-12 CH x 14 SHK x 3 Inch Long Down-Cut CNC Router Bit with Mirror Finish

Amana Tool 51513 SC Spiral ‘O’ Single Flute, Plastic Cutting 1/4 D x 1-1/2 CH x 1/4 SHK x 3 Inch Long Down-Cut CNC Router Bit with Mirror Finish

Amana Tool 51513 SC Spiral ‘O’ Single Flute, Plastic Cutting 1/4 D x 1-1/2 CH x 1/4 SHK x 3 Inch Long Down-Cut CNC Router Bit with Mirror Finish - Solid carbide. Solid carbide. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. Single flute, 22 degree angle.

 

LMT Onsrud 63-618  Solid Carbide Upcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 22 Degree Helix 1 Flute 20000 Overall Length 01875 Cutting Diameter 02500 Shank Diameter

LMT Onsrud 63-618 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1875″ Cutting Diameter, 0.2500″ Shank Diameter

LMT Onsrud 63-618 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1875″ Cutting Diameter, 0.2500″ Shank Diameter - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Single flute, 22 degree angle.

 

Amana Tool 51648 SC CNC Spiral O Single Flute Plastic Cutting 12 D x 2 CH x 12 SHK x 4 Inch Long Up-Cut Router Bit with Mirror Finish

Amana Tool 51648 SC CNC Spiral ‘O’ Single Flute, Plastic Cutting 1/2 D x 2 CH x 1/2 SHK x 4 Inch Long Up-Cut Router Bit with Mirror Finish

Amana Tool 51648 SC CNC Spiral ‘O’ Single Flute, Plastic Cutting 1/2 D x 2 CH x 1/2 SHK x 4 Inch Long Up-Cut Router Bit with Mirror Finish - Single flute, 22 degree angle. Solid carbide. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

LMT Onsrud 63-620 Solid Carbide Upocut Spiral O Flute Cutting TOOL Inch Uncoated Bright Finish 22 Degree Helix 1 Flute 20000 Overall Length 02500 Cutting Diameter 02500 Shank Diameter

LMT Onsrud 63-620 Solid Carbide Upocut Spiral O Flute Cutting TOOL, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter

LMT Onsrud 63-620 Solid Carbide Upocut Spiral O Flute Cutting TOOL, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Single flute, 22 degree angle. Round shanks allow use with a wide variety of toolholding systems.

 

LMT Onsrud 63-606 Solid Carbide Upocut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 22 Degree Helix 1 Flute 20000 Overall Length 01250 Cutting Diameter 02500 Shank Diameter

LMT Onsrud 63-606 Solid Carbide Upocut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1250″ Cutting Diameter, 0.2500″ Shank Diameter

LMT Onsrud 63-606 Solid Carbide Upocut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1250″ Cutting Diameter, 0.2500″ Shank Diameter - Round shanks allow use with a wide variety of toolholding systems. Single flute, 22 degree angle. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

LMT Onsrud 62-762 Solid Carbide Downcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 21 Degree Helix 1 Flute 20000 Overall Length 01250 Cutting Diameter 02500 Shank Diameter

LMT Onsrud 62-762 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1250″ Cutting Diameter, 0.2500″ Shank Diameter

LMT Onsrud 62-762 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1250″ Cutting Diameter, 0.2500″ Shank Diameter - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems. One flute, 21 degree angle.

 

Amana Tool 51476 Solid Carbide Spiral O Single Flute Aluminum Cutting 14 D x 1-12 CH x 14 SHK x 3 Inch Long Up-Cut Router Bit with Mirror Finish

Amana Tool 51476 Solid Carbide Spiral ‘O’ Single Flute, Aluminum Cutting 1/4 D x 1-1/2 CH x 1/4 SHK x 3 Inch Long Up-Cut Router Bit with Mirror Finish

Amana Tool 51476 Solid Carbide Spiral ‘O’ Single Flute, Aluminum Cutting 1/4 D x 1-1/2 CH x 1/4 SHK x 3 Inch Long Up-Cut Router Bit with Mirror Finish - When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Solid carbide. Single flute, 22 degree angle. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.

 

LMT Onsrud 64-025 Solid Carbide Downcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 25 Degree Helix 1 Flute 20000 Overall Length 02500 Cutting Diameter 02500 Shank Diameter

LMT Onsrud 64-025 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 25 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter

LMT Onsrud 64-025 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 25 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Single flute, 21 degree angle. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

LMT Onsrud 65-023 Solid Carbide Upcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 21 Degree Helix 1 Flute 20000 Overall Length 02500 Cutting Diameter 02500 Shank Diameter

LMT Onsrud 65-023 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter

LMT Onsrud 65-023 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter - Round shanks allow use with a wide variety of toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Single flute, 21 degree angle. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

Amana Tool 51427 Solid Carbide Spiral O Single Flute Plastic Cutting 38 Dia x 1-58 Cut Height x

Amana Tool 51427 Solid Carbide Spiral ‘O’ Single Flute, Plastic Cutting 3/8 Dia x 1-5/8 Cut Height x

Amana Tool 51427 Solid Carbide Spiral ‘O’ Single Flute, Plastic Cutting 3/8 Dia x 1-5/8 Cut Height x - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Single flute, 21 degree angle.

 

LMT Onsrud 63-610 Solid Carbide Upcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 22 Degree Helix 1 Flute 20000 Overall Length 01250 Cutting Diameter 02500 Shank Diameter

LMT Onsrud 63-610 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1250″ Cutting Diameter, 0.2500″ Shank Diameter

LMT Onsrud 63-610 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1250″ Cutting Diameter, 0.2500″ Shank Diameter - Single flute, 22 degree angle. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

Amana Tool 51377 Solid Carbide Spiral O Single Flute Aluminum Cutting 14 D x 34 CH x 14 SHK x 2 Inch Long Up-Cut Router Bit with Mirror Finish

Amana Tool 51377 Solid Carbide Spiral ‘O’ Single Flute, Aluminum Cutting 1/4 D x 3/4 CH x 1/4 SHK x 2 Inch Long Up-Cut Router Bit with Mirror Finish

Amana Tool 51377 Solid Carbide Spiral ‘O’ Single Flute, Aluminum Cutting 1/4 D x 3/4 CH x 1/4 SHK x 2 Inch Long Up-Cut Router Bit with Mirror Finish - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems. Solid carbide. One flute, 21 degree angle.

 

LMT Onsrud 65-013 Solid Carbide Upcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 21 Degree Helix 1 Flute 20000 Overall Length 01250 Cutting Diameter 01250 Shank Diameter

LMT Onsrud 65-013 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1250″ Cutting Diameter, 0.1250″ Shank Diameter

LMT Onsrud 65-013 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1250″ Cutting Diameter, 0.1250″ Shank Diameter - Round shanks allow use with a wide variety of toolholding systems. Single flute, 21 degree angle. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

LMT Onsrud 52-701 Solid Carbide Upcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 22 Degree Helix 2 Flutes 40000 Overall Length 03750 Cutting Diameter 03750 Shank Diameter

LMT Onsrud 52-701 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 2 Flutes, 4.0000″ Overall Length, 0.3750″ Cutting Diameter, 0.3750″ Shank Diameter

LMT Onsrud 52-701 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 2 Flutes, 4.0000″ Overall Length, 0.3750″ Cutting Diameter, 0.3750″ Shank Diameter - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems. Double flute, 22 degree angle. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.

 

LMT Onsrud 63-602 Solid Carbide Upcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 22 Degree Helix 1 Flute 15000 Overall Length 00625 Cutting Diameter 01250 Shank Diameter

LMT Onsrud 63-602 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 1.5000″ Overall Length, 0.0625″ Cutting Diameter, 0.1250″ Shank Diameter

LMT Onsrud 63-602 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 1.5000″ Overall Length, 0.0625″ Cutting Diameter, 0.1250″ Shank Diameter - Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of toolholding systems. Single flute, 22 degree angle. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

LMT Onsrud 63-774 Solid Carbide Upcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 21 Degree Helix 1 Flute 20000 Overall Length 02500 Cutting Diameter 02500 Shank Diameter

LMT Onsrud 63-774 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter

LMT Onsrud 63-774 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.2500″ Cutting Diameter, 0.2500″ Shank Diameter - Single flute, 21 degree angle. Round shanks allow use with a wide variety of toolholding systems. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.

 

LMT Onsrud 65-012 Solid Carbide Upcut Spiral O Flute Cutting Tool Uncoated Bright Finish 1 Flute 21 Degree Helix 12 Cutting Length 18 Cutting Diameter 14 Shank Diameter 2 Overall Length Pack of 1

LMT Onsrud 65-012 Solid Carbide Upcut Spiral O Flute Cutting Tool, Uncoated (Bright) Finish, 1 Flute, 21 Degree Helix, 1/2″ Cutting Length, 1/8″ Cutting Diameter, 1/4″ Shank Diameter, 2″ Overall Length (Pack of 1)

LMT Onsrud 65-012 Solid Carbide Upcut Spiral O Flute Cutting Tool, Uncoated (Bright) Finish, 1 Flute, 21 Degree Helix, 1/2″ Cutting Length, 1/8″ Cutting Diameter, 1/4″ Shank Diameter, 2″ Overall Length (Pack of 1) - Single flute, 21 degree angle. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Round shanks allow use with a wide variety of toolholding systems.

 

Amana 51505 14Dx14SHK SPIRAL O PLASTIC

Amana 51505 1/4″Dx1/4″SHK SPIRAL O PLASTIC

Amana 51505 1/4″Dx1/4″SHK SPIRAL O PLASTIC - Round shanks allow use with a wide variety of toolholding systems. Single flute, 22 degree angle. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.

 

LMT Onsrud 62-713 Solid Carbide Downcut Spiral O Flute Cutting Tool Inch Uncoated Bright Finish 21 Degree Helix 1 Flute 20000 Overall Length 01250 Cutting Diameter 01250 Shank Diameter

LMT Onsrud 62-713 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1250″ Cutting Diameter, 0.1250″ Shank Diameter

LMT Onsrud 62-713 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000″ Overall Length, 0.1250″ Cutting Diameter, 0.1250″ Shank Diameter - Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. One flute, 21 degree angle. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. Round shanks allow use with a wide variety of toolholding systems.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.